Abstract:In this article, we focus on the design, test and validation of a hierarchical control framework capable of optimizing lane change trajectories and steering the motion of multiple automated guided vehicles (AGVs) in an uncertain environment. In the upper-level maneuver planning phase, a convex feasible set-based real-time optimization algorithm is adopted to plan the optimal motion trajectories for AGVs. The main novelty of this approach lies in its optimization process, where a sequence of convex feasible sets around the current solution is iteratively constructed such that the nonconvex collision avoidance constraints can be approximated. Subsequently, an improved sequential convex programming (SCP) algorithm is designed and applied to reshape the current maneuver trajectory in the preconstructed convex feasible sets and reduce the error caused by successive linearization of vehicle kinematics and constraints. The planned lane change trajectories are then provided to the lower-level motion controller, where a deep reinforcement learning (DRL)-based collision-free tracking control method is established and applied onboard to produce the control commands. This approach has the capability to deal with unexpected obstacles (e.g., those that suddenly appear around the vehicle). The proposed training method integrates a consensus algorithm with actor-critic deep reinforcement learning to allow multiagent training to achieve faster training speed and improved performance compared with single-agent training. The feasibility and effectiveness of the proposed design are verified by carrying out simulation case studies. Moreover, the validity of the designed hierarchical control framework is further confirmed by executing hardware-in-the-loop tests.

Collision avoidance control of an automated guided vehicle based on hierarchical trajectory planning and fixed-time prescribed adaptive sliding mode

A Dynamic Trajectory Planning Method for Lane-Changing Maneuver of Connected and Automated Vehicles

A Novel Simultaneous Planning and Control Scheme of Automated Lane Change on Slippery Roads.

Real-time Predictive Sliding Mode Control Method for AGV with Actuator Delay

Path Planning and Trajectory Tracking for Autonomous Obstacle Avoidance in Automated Guided Vehicles at Automated Terminals

An Emergency Collision-Avoidance Controller for Distributed Drive Autonomous Vehicles Based on AFS and DYC

Supervisory Control Strategy for AVs under Unexpected Emergency Conditions

Fast Collision-Free Multivehicle Lane Change Motion Planning and Control Framework in Uncertain Environments

Trajectory Tracking Control for Double-steering Automated Guided Vehicle Based on Model Predictive Control

Adaptive Coordinated Collision Avoidance Control of Autonomous Ground Vehicles

Path Planning and Path Tracking for Collision Avoidance of Autonomous Ground Vehicles

Super-twisting algorithm second-order sliding mode control for collision avoidance system based on active front steering and direct yaw moment control

Integrated Avoid Collision Control of Autonomous Vehicle Based on Trajectory Re-Planning and V2V Information Interaction

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Fixed-time adaptive sliding mode-based active rollover prevention control of automated guided vehicles via improved super-twisting observer

Path Planning of Collision Avoidance for Unmanned Ground Vehicles: A Nonlinear Model Predictive Control Approach

Cost-Guaranteed Trajectory Tracking Control for Automated Driving System

A Hierarchical Trajectory Planning Algorithm for Automated Guided Vehicles in Construction Sites

Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control

A New Adaptive Cruise Control Considering Crash Avoidance for Intelligent Vehicle

Trajectory Planning and Tracking for Autonomous Vehicle Based on State Lattice and Model Predictive Control