Abstract:<p>In this paper, the discontinuous dynamical behavior for a three degrees of freedom mechanical oscillatory system with one-sided rigid impact in the presence of dry friction is investigated by using the flow switchability theory in discontinuous dynamical systems. Based on the discontinuity resulted from impact and friction, different domains and boundaries are defined in absolute and relative coordinates, respectively. At the discontinuous boundaries, the necessary and sufficient conditions for motion switchability are developed by means of G-functions. Finally, the passable flows, sliding flows, grazing flows, stick flows, impact motions and periodic motions are illustrated numerically for a better understanding of the motion switching mechanism in such a complex system. The results obtained in this paper reveal the complicated switching mechanism of motion for objects in a discontinuous dynamic system and also provide a reference for the selection of parameters in the system of vibro-impact mechanical devices such as pile drivers and horizontal directional drillings etc.</p>
What problem does this paper attempt to address?
This paper aims to study the discontinuous dynamic behaviors of a mechanical oscillation system with three degrees of freedom in the presence of dry friction and unilateral rigid impact. Specifically, by using the flow - switching theory in discontinuous dynamic systems, the paper explores the motion - switching conditions of the system under the combined action of impact and friction, including the switching conditions on the discontinuous boundaries for passable motion, sliding motion, sticking motion, jamming motion and grazing motion. This research is of great significance for understanding the motion - switching mechanisms of complex systems and provides a reference for the parameter selection of vibration - impact mechanical equipment (such as pile drivers and horizontal directional drilling equipment, etc.).
### Problems Solved in the Paper
1. **Analysis of Discontinuous Dynamic Behaviors**: The paper analyzes in detail the discontinuous dynamic behaviors of a mechanical oscillation system with three degrees of freedom in the presence of dry friction and unilateral rigid impact. Such systems are widely existing in practical engineering, for example, pile drivers and horizontal directional drilling equipment, etc.
2. **Motion - Switching Conditions**: By introducing different domains and boundaries, the paper derives the switching conditions of different motion types (such as passable motion, sliding motion, sticking motion, jamming motion and grazing motion) on these boundaries. These conditions are determined by the G - function.
3. **Numerical Simulation of Complex Motions**: Based on the above - mentioned switching conditions, the paper conducts numerical simulations of the complex motions of the system, including periodic motions, etc., in order to better understand the motion - switching mechanisms of such complex systems.
### Formulas and Models
The main formulas involved in the paper include:
- **Dry Friction Force**:
\[
F_f^{(i)}=\begin{cases}
\mu F_N^{(i)}, & \text{if } \dot{x}^{(i)}>\dot{x}^{(\bar{i})}\\
\in[-\mu F_N^{(i)}, \mu F_N^{(i)}], & \text{if } \dot{x}^{(i)} = \dot{x}^{(\bar{i})}\\
-\mu F_N^{(i)}, & \text{if } \dot{x}^{(i)}<\dot{x}^{(\bar{i})}
\end{cases}
\]
where \(F_N^{(i)} = m^{(1)}m^{(i)}g\), \(\dot{x}^{(i)}\) is the velocity of mass \(m^{(i)}\), \(\dot{x}^{(\bar{i})}\) is the velocity of mass \(m^{(\bar{i})}\), and \(\mu\) is the friction coefficient between masses \(m^{(1)}\) and \(m^{(2)}\).
- **Frictionless Resultant Force**:
\[
F_{nf}^{(1)}=-A^{(1)}(\dot{x}^{(1)}-\dot{x}^{(2)})-B^{(1)}(x^{(1)}-x^{(2)})+Q^{(1)}\cos(\Omega t)+b^{(1)}
\]
\[
F_{nf}^{(2)}=A^{(2)}\dot{x}^{(1)}+B^{(2)}x^{(1)}-C^{(2)}\dot{x}^{(2)}-D^{(2)}x^{(2)}+E^{(2)}\dot{x}^{(3)}+F^{(2)}(x^{(3)}-h)
\]
where:
\[
A^{(i)}=\frac{c_1}{m^{(i)}}, \quad B^{(i)}=\frac{k_1}{m^{(i)}}, \quad Q^{(1)}=\frac{A_0}{m^{(1)}}, \quad b^{(1)}=\frac{B_0}{m^{(1)}}
\]
\[
C^{(2)}=\frac{c_1 + c_2 + c_3}{m^{(2)}}, \quad D^{(2)}