Progress in Muon Cooling Research and Development

Daniel M. Kaplan

DOI: https://doi.org/10.1088/0954-3899/29/8/316

2003-01-30

Abstract:The MuCool R&D program is described. The aim of MuCool is to develop all key pieces of hardware required for ionization cooling of a muon beam. This effort will lead to a more detailed understanding of the construction and operating costs of such hardware, as well as to optimized designs that can be used to build a Neutrino Factory or Muon Collider. This work is being undertaken by a broad collaboration including physicists and engineers from many national laboratories and universities in the U.S. and abroad. The intended schedule of work will lead to ionization cooling being well enough established that a construction decision for a Neutrino Factory could be taken before the end of this decade based on a solid technical foundation.

Accelerator Physics,High Energy Physics - Experiment,High Energy Physics - Phenomenology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop and optimize the key hardware technologies for muon cooling in order to realize the practical application of ionization cooling. Specifically, the main research objectives include:

1. **Develop muon beam cooling technology**: When muon beams are generated, they have a large phase - space distribution, while the existing accelerator technologies require a smaller input beam. To solve this mismatch problem, the research team is committed to developing new large - aperture acceleration technologies or reducing the size of muon beams through "cooling".

2. **Achieve rapid cooling**: Since the lifetime of muons is only 2.2 microseconds, a sufficiently fast cooling technology is required. Ionization cooling is the only technology that can effectively cool muon beams within such a short time. It cools muon beams in a strong focusing magnetic field by making muons repeatedly pass through an energy - absorbing medium and alternately using accelerating devices.

3. **Support the construction of future facilities**: Through this research, researchers hope to obtain a more detailed understanding and technological basis so that they can build a neutrino factory or a muon collider in the future. This will help reduce the construction and operation costs of these facilities and optimize the design schemes.

4. **Establish technical feasibility**: The research team hopes to verify the feasibility of ionization cooling through a series of experiments and technology developments and ensure that a decision to build a neutrino factory can be made on a solid technological basis by the end of this century.

### Principle of Ionization Cooling

The core of ionization cooling lies in reducing the momentum components of muons through an energy - absorbing medium, thereby reducing the normalized transverse emittance. According to the formula:

\[
\epsilon_n \approx \sqrt{\sigma_x \sigma_y \sigma_{px} \sigma_{py}} / (mc)
\]

where:
- \(\sigma_x\) and \(\sigma_y\) are the root - mean - square deviations of position.
- \(\sigma_{px}\) and \(\sigma_{py}\) are the root - mean - square deviations of momentum coordinates.
- \(m\) is the particle mass.
- \(c\) is the speed of light.

During the ionization cooling process, the energy - absorbing medium will reduce all three momentum components without affecting the beam spot size, thereby achieving the cooling effect. However, Coulomb scattering will increase the beam divergence, resulting in a heating effect. The balance between the cooling and heating effects can be approximately expressed by the following formula:

\[
\frac{d\epsilon_n}{ds} \approx -\frac{1}{\beta^2} \left\langle \frac{dE_\mu}{ds} \right\rangle \frac{\epsilon_n}{E_\mu} + \frac{(0.014)^2}{2 E_\mu m_\mu L_R}
\]

where:
- \(\beta\) is the muon velocity (in units of \(c\)).
- \(E_\mu\) is the muon energy (in units of GeV).
- \(\beta_\perp\) is the lattice beta function at the absorber position.
- \(m_\mu\) is the muon mass (in units of GeV/\(c^2\)).
- \(L_R\) is the radiation length of the absorber medium.

To minimize the heating effect, it is recommended to use liquid hydrogen (LH_2) as the energy - absorbing medium and combine it with superconducting solenoid focusing to achieve efficient ionization cooling.

### Development of Key Technologies

The paper also describes the R & D progress of the MuCool collaboration in the following key technology areas:
- **High - gradient room - temperature radio - frequency cavities**: Develop high - gradient radio - frequency cavities that can work in strong magnetic fields.
- **High - power liquid - hydrogen absorbers**: Design and manufacture high - power liquid - hydrogen absorbers with thin windows.
- **Other absorbing materials**: Evaluate the performance of alternative absorbing materials such as helium, lithium, lithium compounds, methane, and beryllium.
- **Testing facilities**: Build testing facilities for testing ionization - cooling components and systems.

Through these efforts, the research team aims to provide reliable technical support for future neutrino factories and muon colliders.