Subaru Prime Focus Camera -- Suprime-Cam --

Satoshi Miyazaki,Yutaka Komiyama,Maki Sekiguchi,Sadanori Okamura,Mamoru Doi,Hisanori Furusawa,Masaru Hamabe,Katsumi Imi,Masahiki Kimura,Fumiaki Nakata,Norio Okada,Masami Ouchi,Kazuhiro Shimasaku,Masafumi Yagi,Naoki Yasuda

DOI: https://doi.org/10.1093/pasj/54.6.833

2002-11-17

Abstract:We have built an 80-mega pixels (10240 X 8192) mosaic CCD camera, called Suprime-Cam, for the wide-field prime focus of the 8.2 m Subaru telescope. Suprime-Cam covers a field of view 34' X 27', a unique facility among the the 8-10 m class telescopes, with a resolution of 0.''202 per pixel. The focal plane consists of ten high-resistivity 2k X 4k CCDs developed by MIT Lincoln Laboratory, which are cooled by a large stirling-cycle cooler. The CCD readout electronics was designed to be scalable, which allows the multiple read-out of tens of CCDs. It takes 50 seconds to readout entire arrays. We designed a filter-exchange mechanism of the jukebox type that can hold up to ten large filters (205 X 170 X 15 mm^3). The wide-field corrector is basically a three-lens Wynne-type, but has a new type of atmospheric dispersion corrector. The corrector provides a flat focal plane and an un-vignetted field of view of 30' in diameter. The achieved co-planarity of the focal array mosaic is smaller than 30 micron peak-to-peak, which realizes mostly the seeing limited image over the entire field. The median seeing in the Ic-band, measured over one year and a half, is 0.''61. The PSF anisotropy in Suprime-Cam images, estimated by stellar ellipticities, is about 2% under this median seeing condition. At the time of commissioning, Suprime-Cam had the largest survey speed, which is defined as the field of view multiplied by the primary mirror area of the telescope, among those cameras built for sub-arcsecond imaging.

Astrophysics

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to construct a high - performance mosaic CCD camera (Suprime - Cam) for the wide - angle prime focus position of the 8.2 - meter Subaru telescope, in order to achieve image quality limited by natural seeing and provide excellent survey speed. Specifically, the paper focuses on the following aspects:

1. **Achieving image quality limited by natural seeing**: The author's goal is to achieve image quality limited by natural seeing across the entire field of view. Based on the best seeing on Mauna Kea (about 0."4) and the median value (about 0."7 - 0."8), a wide - field corrector and other key components were designed to ensure image quality.

2. **Improving observational efficiency**: Due to the fast F - ratio (1.86) of the Subaru telescope, the exposure time of broadband filters is relatively short, especially when the sky brightness is high at longer wavelengths. To maximize observational efficiency, it is necessary to minimize CCD read - out time and ensure high reliability of all mechanical components, including shutters and filter exchangers.

3. **Solving CCD splicing and installation problems**: To cover a field of view of 34'×27', ten high - impedance 2k×4k CCDs (developed by MIT Lincoln Laboratory) were used. These CCDs need to be precisely installed to ensure their coplanarity is within ±15µm. To this end, the author developed a new CCD installation method, using buffer blocks and alignment pins to compensate for the tilt of the CCD surface.

4. **Optimizing the cooling system**: To reduce the dark current to a negligible level, the CCD needs to be maintained at around - 110°C. For this purpose, a Stirling cycle cooler (Daikin Industries Co., Ltd WE - 5000) was adopted, and various factors of heat inflow, such as radiation from the window and Dewar wall, and heat conduction of polycarbonate struts, were considered in the design.

5. **Increasing the flexibility of the filter exchange mechanism**: A filter exchange mechanism similar to a jukebox was designed, which can accommodate up to ten large filters (205×170×15 mm³) to adapt to different observational needs and improve observational efficiency.

By solving the above problems, Suprime - Cam has achieved a large - field - of - view imaging capability unique among 8 - 10 - meter - class telescopes and had the highest survey speed during commissioning, and can provide unique research opportunities in a wide range of scientific fields.