Abstract:In recent years, Rotary Detonation Engine (RDE) has attracted more and more attention because of their higher combustion efficiency than conventional aerospace engines. For the key problems, ignition technique is particularly important. In order to establish a steady rotating detonation wave under one single ignition in a combustion chamber, a method based on controlling initial fuel distribution is proposed to start a rotating detonation engine under 0.4 MPa injection total pressure using hydrogen/air mixture as its propellant. Two-dimensional reactive Navier-Stokes equation coupled with the Arrhenius kinetic model and κ-ε model are used to simulate detonation process. Elementary chemical reaction model with 9 species 27 reversible reactions is applied to describe the evolution of reaction components. The finite volume method is conducted, and flux terms are solved by using the monotonic upstream-centered scheme for conservation laws, and the time integration is performed by using Euler method. Grid numbers are 600 (azimuthal direction) ×200 (axial direction), with mesh size of about 0.5 mm. Initial fuel filling rate (ϕ) is used to quantify the initial fuel distribution. The numerical study on the propagation characteristics of rotating detonation wave shows that the initial fuel filling rate is the key to the establishment of rotary detonation wave. This effect is particularly evident when the fuel injection pressure is low, which determines the height of the fuel layer(hf) for the first cycle of detonation wave development. When RDE operating steadily, hf is a function of the mixture sensitivity to detonation. But in initial stage, hf is affected by the fuel distribution and this affection can last more than one period. Once detonation wave or deflagration wave formed, it can either maintain rotating or die down, which is determined by the height of mixture layer ahead of it. Thus, keeping hf in an appropriate range by adjusting the initial fuel filling rate is the key to establish and maintain a rotating detonation wave in initial stage. Also, in this stage DW faces maximum possibility of extinguish. Based on this strategy, a rotating detonation wave is established successfully in combustion chamber with diameter of 95.5 mm and the length of chamber is 100 mm. The computed results give the rotating detonation wave has a velocity of 1 604 m/s and operational frequency is 5347.6 Hz. Furthermore, there are four operation modes of the engine due to different initial fuel filling rate, which are failed initiation of the detonation (0%−13.3%), stable rotating detonation (13.3%−20%), unstable detonation (20%−26.6%) and dying detonation (26.7%−100%). So the critical range of the initial fuel filling rate for steady rotating detonation is obtained. Moreover, the initial fuel distribution also influences the delay time of fuel deflagration to detonation transition.

Synchronized Initiation of Two Cylindrical Rotating Detonation Engines

Nitrous Oxide/Ethanol Cylindrical Rotating Detonation Engine for Sounding Rocket Space Flight

Combustion Structure of a Cylindrical Rotating Detonation Engine with Liquid Ethanol and Nitrous Oxide

Injection Studies on a Small-Scale Rotating Detonation Engine

Method based on controlling initial fuel distribution to establish stable rotating detonation wave in combustion chamber

Experimental Investigation on H 2 / O 2 Continuously Rotating Detonation Engine

Analysis on Propulsive Performance of Hollow Rotating Detonation Engine with Laval Nozzle

Experimental Research on Ignition and the Stabilization Process in Rotating Detonation Chamber

Experimental Investigation of a Cylindrical Air-Breathing Continuous Rotating Detonation Engine with Different Nozzle Throat Diameters

Characterization of wave modes in a kerosene-fueled rotating detonation combustor with varied injection area ratios

Experimental investigation on spray and detonation initiation characteristics of premixed/non-premixed RDE

Investigation of flow field characteristics and performance of carbon-hydrogen/oxygen-rich air rotating detonation engine

Experimental research on the performance of hollow and annular rotating detonation engines with nozzles

Low mass-flow operation of small-scale rotating detonation engine

Three-dimensional Numerical Investigations of the Rotating Detonation Engine with a Hollow Combustor

Experimental validation of rotating detonation for rocket propulsion

One Inducing Factor of the Operational Mode Transition in A Rotating Detonation Engine

Numerical Investigation of Rotating Detonation Engine Propulsive Performance

Numerical Study of Hollow Rotating Detonation Engine with Different Fuel Injection Area Ratios

Experimental verification of cylindrical air-breathing continuous rotating detonation engine fueled by non-premixed ethylene

Experimental Study on the Propagation Characteristics of Rotating Detonation Wave with Liquid Hydrocarbon/High-Enthalpy Air Mixture