Abstract:Whereas freeze-drying is a widely used method to produce porous hydrogel scaffolds, the mechanisms of pore formation involved in this process remained poorly characterized. To explore this, we focused on a cross-linked polysaccharide-based hydrogel developed for bone tissue engineering. Scaffolds were first swollen in 0.025% NaCl then freeze-dried at low cooling rate, i.e. - 0.1 °C min-1, and finally swollen in solvents of increasing ionic strength. We found that scaffold's porous structure is strongly conditioned by the nucleation of ice. Electron cryo-microscopy of frozen scaffolds demonstrates that each pore results from the growth of one to a few ice grains. Most crystals were formed by secondary nucleation since very few nucleating sites were initially present in each scaffold (0.1 nuclei cm-3 °C-1). The polymer chains are rejected in the intergranular space and form a macro-network. Its characteristic length scale coincides with the ice grain size (160 <math>μm</math>) and is several orders of magnitude greater than the mesh size (90 nm) of the cross-linked network. After sublimation, the ice grains are replaced by macro-pores of 280 <math>μm</math> mean size and the resulting dry structure is highly porous, i.e. 93%, as measured by high-resolution X-ray tomography. In the swollen state, the scaffold mean pore size decreases in solvent of increasing ionic strength (120 µm in 0.025% NaCl and 54 µm in DBPS) but the porosity remains the same, i.e. 29% regardless of the solvent. Finally, cell seeding of dried scaffolds demonstrates that the pores are adequately interconnected to allow homogenous cell distribution.<h3>Statement of significance</h3>The fabrication of hydrogel scaffolds is an important research area in tissue engineering. Hydrogels are textured to provide a 3D-framework that is favorable for cell proliferation and/or differentiation. Optimum hydrogel pore size depends on its biological application. Producing porous hydrogels is commonly achieved through freeze-drying. However, the mechanisms of pore formation remain to be fully understood. We carefully analyzed scaffolds of a cross-linked polysaccharide-based hydrogel developed for bone tissue engineering, using state-of-the-art microscopic techniques. Our experimental results evidenced the shaping of hydrogel during the freezing step, through a specific ice-templating mechanism. These findings will guide the strategies for controlling the porous structure of hydrogel scaffolds.

Gelatin tailored pore structure and mechanical properties of freeze-cast porous boron carbide ceramics

Bioinspired Large-Scale Aligned Porous Materials Assembled with Dual Temperature Gradients

Structure/processing relationships and mechanical properties of freeze-cast B4C scaffolds with unidirectional channels

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Interpenetrating Polymer Network Hydrogels Composed of Chitosan and Photocrosslinkable Gelatin with Enhanced Mechanical Properties for Tissue Engineering

Physical, mechanical and in vitro biological evaluation of synthesized biosurfactant-modified silanated-gelatin/sodium alginate/45S5 bioglass bone tissue engineering scaffolds

Characteristics and Cell Growth Behavior of Gelatin/Polyvinyl Alcohol Porous Scaffolds

Preparation and Characterization of Β-Tcp/cs Scaffolds by Freeze-extraction and Freeze-gelation

Changes in free cytosolic Ca2+ in hepatocytes following alpha 1-adrenergic stimulation. Studies on Quin-2-loaded hepatocytes.

Fabrication and characterization of highly porous barium titanate based scaffold coated by Gel/HA nanocomposite with high piezoelectric coefficient for bone tissue engineering applications

Mechanisms of pore formation in hydrogel scaffolds textured by freeze-drying

MEDIATOR METABOLISM OF MYOCARDIUM IN COMPENSATORY HYPERFUNCTION AND HYPERTROPHY OF HEART.

Fabrication and Characterization of Gelatin/Polyvinyl Alcohol Composite Scaffold

Preparation and properties of ultralight fibrous β-Si3N4 3D scaffolds with honeycomb-like structure by directional freeze-casting

A Hierarchical Hydrogel Impregnation Strategy Enables Brittle-Failure-Free 3D-Printed Bioceramic Scaffolds.

Hierarchically Porous Nagelschmidtite Bioceramic-Silk Scaffolds for Bone Tissue Engineering.

In vitro degradation and angiogenesis of the porous calcium silicate–gelatin composite scaffold

Bioactive Glass-Reinforced Bioceramic Ink Writing Scaffolds: Sintering, Microstructure and Mechanical Behavior

Novel microsphere-packing synthesis, microstructure, formation mechanism and in vitro biocompatibility of porous gelatin/hydroxyapatite microsphere scaffolds

Calcium silicate/gelatin composite scaffolds with controllable degradation behavior: Fabrication and evaluation

Highly porous gelatin–silica hybrid scaffolds with textured surfaces using new direct foaming/freezing technique