Abstract:Background: Carbon nanotube-based cold cathode technology has revolutionized the miniaturization of X-ray tubes. However, current applications of these devices required optimization for large, uniform fields with low intensity. Purpose: This work investigated the feasibility and radiological characteristics of a novel conical X-ray target optimized for high intensity and high directionality to be used in a compact X-ray tube. Methods: The proposed device uses an ultrathin, conical tungsten-diamond target that exhibits significant heat loading while maintaining a small focal spot size and promoting forward-directedness of the X-ray field through preferential attenuation of oblique-angled photons. The electrostatic and thermal properties of the theoretical tube were calculated and analyzed using COMSOL Multiphysics software. The production, transport, and calculation of radiological properties associated with the resultant X-ray field were performed using the Geant4 toolkit via its wrapper, TOPAS. Results: Heat transfer analysis of this X-ray tube demonstrated the feasibility of a 200-kV electron beam bombarding the proposed target at a maximum current of 100 mA using a 1-ms symmetric duty cycle. The cathode of the X-ray tube was designed to be segmented into nine switchable electrical segments for modulation of the focal spot size from 0.4- to 10.8-mm. After importing the COMSOL-derived electron beam into TOPAS for X-ray production simulations, radiological analysis of the resultant field demonstrated high levels of intrinsic beam collimation while maintaining high intensity. A maximum dose rate of 17,887 cGy/min was calculated for 1-mm depth in water at 7-cm distance. Conclusions: The proposed X-ray tube design can create highly directional X-ray fields with superior fluence compared to that of current commercial X-ray tubes of comparable size.

Nanotube diameter optimal for channeling of high-energy particle beam

Waveguide Bends from Nanometric Silica Wires

Modified Beam Theories for Bending Properties of Nanowires Considering Surface/Intrinsic Effects and Axial Extension Effect

Light Propagation in Curved Silver Nanowire Plasmonic Waveguides.

Crystal Channelling in Accelerators

Can electron beams be really focused by bent crystals?

Channeling of Protons Through Carbon Nanotubes Embedded in Dielectric Media

Channeling of electrons and positrons in straight and periodically bent diamond(110) crystals

A narrow plane cut near the crystal surface increases the probability of capture into the stable channeling motion up to 99 percent

Optimization of vertically aligned carbon nanotube beam trajectory with the help of focusing electrode in the microchannel plate

Comparison of Micro- and Nano-Size Particle Transport and Depositions in 90 Degree Bend Microchannel

Bent Crystal Design and Characterization for High-Energy Physics Experiments

Channeling and Radiation of 855 MeV Electrons and Positrons in Straight and Bent Tungsten (110) Crystals

Electromagnetic Modeling of Multiwalled Carbon Nanotubes As Nanorod Electrodes for Optimizing Device Geometry in A Nanophotonic Device

Tight focusing proton beam with radius in nanometer scale generation based on channeled solid target

Carbon Nanotubes As Field Emission Sources

Dynamic polarization effects on the angular distributions of protons channeled through carbon nanotubes in dielectric media

Beam steering with quasi-mosaic bent silicon single crystals -- Computer simulations for 855 MeV and 6.3 GeV electrons and comparison with experiments

Optimization of Nanotube Electrode Geometry in a Liquid Crystal Media from Wavefront Aberrations.

Electron channeling experiments with bent silicon single crystals -- a reanalysis based on a modified Fokker-Planck equation

Proof-of-concept for a thin conical X-ray target optimized for intensity and directionality for use in a carbon nanotube-based compact X-ray tube