Abstract:Abstract Non-fullerene acceptors (NFAs) based on non-fused conjugated structures have more potential to realize low-cost organic photovoltaic (OPV) cells. However, their power conversion efficiencies (PCEs) are much lower than those of the fused-ring NFAs. Herein, a new bithiophene-based non-fused core (TT-P i ) featuring good planarity as well as large steric hindrance was designed, based on which a completely non-fused NFA, A4T-16, was developed. The single-crystal result of A4T-16 reveals that a three-dimensional interpenetrating network can be formed due to the compact π–π stacking between the adjacent end-capping groups. A high PCE of 15.2% is achieved based on PBDB-TF:A4T-16, which is the highest value for the cells based on the non-fused NFAs. Notably, the device retains ~84% of its initial PCE after 1300 h under the simulated AM 1.5 G illumination (100 mW cm −2 ). Overall, this work provides insight into molecule design of the non-fused NFAs from the aspect of molecular geometry control.

What problem does this paper attempt to address?

This paper attempts to solve the problems of non - fullerene acceptor (NFA) material design and performance improvement in organic solar cells, especially for fully non - fused - ring non - fullerene acceptors. Specifically: 1. **Improve the photoelectric conversion efficiency (PCE)**: Although non - fullerene acceptors based on fused - ring structures have made significant progress, their high synthesis costs limit large - scale applications. Therefore, researchers hope to develop fully non - fused - ring non - fullerene acceptors that are low - cost and highly efficient to achieve higher photoelectric conversion efficiencies. 2. **Optimize molecular geometry and packing patterns**: To replace the fused - ring structure, researchers need to address the challenges of non - fused - ring acceptors in molecular geometry control and packing patterns. The fused - ring structure has good planarity and rigidity, which is helpful for π - π stacking and charge transfer. However, the non - fused - ring structure is prone to distortion, resulting in performance degradation. Therefore, how to design non - fused - ring acceptors with good planarity and rigidity is one of the key issues. 3. **Improve device stability and lifetime**: In addition to improving the photoelectric conversion efficiency, it is also necessary to ensure the stability of the device under long - term illumination. Researchers hope to maintain high performance of the device under simulated sunlight irradiation by optimizing the material structure. ### Main contributions To solve the above problems, the authors proposed a new molecular design strategy. They constructed a bithiophene unit (TT - Pi) with good planarity and rigidity by introducing functional groups with large steric hindrance effects. Based on TT - Pi, they synthesized a brand - new fully non - fused - ring non - fullerene acceptor A4T - 16. The experimental results show that: - **High photoelectric conversion efficiency**: The organic solar cell based on PBDB - TF:A4T - 16 achieved a photoelectric conversion efficiency of 15.2%, which is the highest efficiency among currently fully non - fused - ring non - fullerene acceptors. - **Excellent stability**: After 1300 hours under simulated AM 1.5 G illumination conditions, the device can still maintain 84% of its initial efficiency. - **Ideal molecular packing pattern**: The single - crystal X - ray diffraction results show that A4T - 16 can form a three - dimensional interlaced network structure, which is beneficial for electron transfer. In conclusion, this research provides new ideas and methods for the future development of high - efficiency and low - cost organic solar cells.

Completely non-fused electron acceptor with 3D-interpenetrated crystalline structure enables efficient and stable organic solar cell

Non-Fullerene Acceptor for Organic Solar Cells with Chlorination on Dithieno[3,2-b:2′,3′-d]pyrrol Fused-Ring

Nonfused Nonfullerene Acceptors with an A-D-A'-D-A Framework and a Benzothiadiazole Core for High-Performance Organic Solar Cells.

A 3D nonfullerene electron acceptor with a 9,9′-bicarbazole backbone for high-efficiency organic solar cells

A Noncovalently Fused‐Ring Asymmetric Electron Acceptor Enables Efficient Organic Solar Cells

Completely Non‐fused Low‐cost Acceptor Enables Organic Photovoltaic Cells with 17% Efficiency

Organic solar cells based on non-fullerene acceptors containing thiophene [3,2-b] pyrrole

Enhanced crystal network and charge transfer of non-fused ring electron acceptors via interchain interaction for efficient and stable organic solar cells

Non-fullerene Acceptors with a Thieno[3,4-c]pyrrole-4,6-dione (TPD) Core for Efficient Organic Solar Cells

Enhanced Crystal Network and Charge Transfer of Non-Fused Ring Electron Acceptor Via Interchain Interaction Enable Efficient and Stable Organic Solar Cells

Unaxisymmetric Non-Fused Electron Acceptors for Efficient Polymer Solar Cells

Conformation flipping of asymmetric nonfullerene acceptors enabling high performance organic solar cells with 77% fill factors

Medium Bandgap Non‐fullerene Acceptor Enabling Organic Photovoltaic Cell with 30% Efficiency Under Indoor Artificial Light

Optimizing Molecular Crystallinity and Suppressing Electron‐Phonon Coupling in Completely Non‐fused Ring Electron Acceptors for Organic Solar Cells

High‐Efficiency Organic Solar Cells Based on a Low‐Cost Fully Non‐Fused Electron Acceptor

Simple Nonfused Ring Electron Acceptors with 3D Network Packing Structure Boosting the Efficiency of Organic Solar Cells to 15.44%

Halogenated Nonfused Ring Electron Acceptor for Organic Solar Cells with a Record Efficiency of over 17%

Benzyl side-chain engineering of non-fullerene acceptors for efficient organic solar cells

Pyran-fused non-fullerene acceptor achieving 15.51% efficiency in organic solar cells

Near‐Infrared Electron Acceptors with Fluorinated Regioisomeric Backbone for Highly Efficient Polymer Solar Cells

Near-Infrared Electron Acceptors with Unfused Architecture for Efficient Organic Solar Cells.