Abstract:Purpose - This paper aims to provide a 3D finite element (FE) model for dynamic simulation of cutterhead and soil interaction in slurry shield tunneling. Design/methodology/approach - Dynamic numerical simulation of excavation process is realized by combined use of submodeling method and arbitrary Lagrangian Eulerian (ALF) approach. The model size reduction, soil mesh refinement and stress state initialization are fulfilled by submodeling. The large soil deformations, failures and flows are handled by ALE approach. Computation time is reduced by parallel domain decomposition with recursive coordinate bisection method. Validation of the proposed approach is achieved by comparing the numerical results with monitored data from the model test for Yangtze River tunneling project. Findings - The proposed approach proves to be an effective technique to simulate the cutterhead and soil interaction dynamically in tunnel excavation. Comparative study on the effect of mesh density indicates the requirement of relative mesh refinement. Exploration of the parallel computing performance points out the best decomposed domain for the simulation. Parametric study on the effect of rotary speed and investigation on soil properties presents the significant factors for torque. Practical implications - The proposed numerical model can help in the development process of reduced-scale model test, as well as design and selection of slurry shield machines. Originality/value - The originality comes from the need to evaluate the excavation performance of slurry shield machine in tunneling project. This contribution provides a 3D numerical approach, which takes into account the stress state in soil and dynamic contact effects between soil and cutterhead. In this work, large deformation in soil is handled. Besides, soil failures and flows are captured.

Refined 3D modelling of spatial-temporal distribution of excess pore water pressure induced by large diameter slurry shield tunneling

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

Initial Excess Pore Water Pressures Induced by Tunnelling in Soft Ground

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

Analysis and Prediction of Ground Settlements Due to Slurry Shield Tunneling in a River-crossing Tunnel

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Total Thrust Calculation and Test Research for Soil Pressure Balancing Shield Tunneling

Ground movement induced by parallel EPB tunnels in silty soils

Study on the Influence and Control Methods of Shield Tunneling Through the Sensitive Buildings

Simple approach to assessing excess pore water pressure induced by shield tunneling in saturated-unsaturated clay soil

Research on Distribution of Initial Excess Pore Water Pressure Due to Shield Tunnelling

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

Research on Dissipation of Excess Pore Water Pressure Caused by Shield Tunnelling

Research of EPB Shield Tunneling Parameter Relations and Their Influence on Stratum Displacement

The Influence Factors Analysis of Initial Excess Pore Water Pressure Caused by Construction of Shield Tunnels

Analytical Solution of Deformation of Underlying Shield Tunnel Caused by Foundation Pit Excavation and Dewatering

A novel hydro‐mechanical coupled multiphysics model for slurry penetration in sand with application to face stability analysis of shield tunnel

Research on theoretical calculation of long-term ground settlement caused by shield tunneling

RESEARCH ON POST-CONSTRUCTION SURFACE SETTLEMENT CAUSED BY SHIELD TUNNELING

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling