Abstract:Mixed-matrix membranes (MMMs) based on metal-organic frameworks (MOFs) molecular sieves have been extensively studied in gas separation due to the high performance and good compatibility of MOF with polymers. In this work, 6FDA-based polyimides MMMs incorporating M-gallate (M = Ni, Co, Mg) MOF particles were fabricated for the first time and investigated for ethylene/ethane (C2H4/C2H6) separation. By reducing synthesis temperature and introducing agitation, the Ni-gallate particles synthesized in flask (Ni-gallate(F)) with optimized conditions are smaller than Ni-gallate synthesized in autoclave (Ni-gallate(A)). The particle size was reduced from ~7 μm (Ni-gallate(A)) to ~0.8 μm (Ni-gallate(F)), which enables the formation of uniform MMMs. Because of the better compatibility with polyimide and higher adsorption performance of Ni-gallate than Mg-gallate and Co-gallate, the 6FDA-DAM MMM containing Ni-gallate(F) was capable of simultaneously improving C2H4/C2H6 selectivity and C2H4 permeability whereas the MMM with Mg-gallate(F) or Co-gallate(F) failed in performance enhancement. The 6FDA-DAM MMM with Ni-gallate(F) loading of 20% exhibited optimal C2H4/C2H6 separation performance that surpassed the upper-bound of pure polymers. Detailed analysis of sorption and diffusion coefficients suggested that the enhanced transport properties in Ni-gallate(F) MMMs were attributed to the increase of sorption coefficient provided by the higher C2H4 sorption capacity and selectivity, as well as the favorable gas diffusivity via moderately confined pores of the incorporated Ni-gallate(F) fillers.

What problem does this paper attempt to address?

The paper aims to address the issue of separating ethylene (C2H4) from ethane (C2H6). Ethylene is an important chemical raw material widely used in the industrial production of synthetic fibers, rubber, and plastics. Currently, ethylene is mainly obtained from gas mixtures produced by refineries and petrochemical plants. In these mixtures, the separation of ethylene and ethane is crucial for high-quality industrial raw materials. Traditional separation methods such as distillation, extraction, and adsorption, although effective, consume a large amount of energy due to the similar properties of ethylene and ethane. Therefore, membrane-based separation methods are considered an effective strategy to achieve environmentally friendly and energy-saving separation. However, polymer membranes face a trade-off between permeability and selectivity, limiting their performance. Inorganic membranes, while having excellent separation performance, face challenges in defect-free large-scale preparation. To address the above issues, researchers have developed Mixed-Matrix Membranes (MMMs) by dispersing porous fillers into a polymer matrix to combine the advantages of both. Metal-Organic Frameworks (MOFs) are used as novel fillers due to their good compatibility with polymers. In this paper, M-gallate MOF particles containing different metals (Ni, Co, Mg) were prepared by optimizing synthesis conditions and incorporated into 6FDA polyimide to improve ethylene/ethane separation performance. Specifically, by lowering the synthesis temperature and introducing stirring, smaller Ni-gallate particles (approximately 0.8 μm) were obtained, resulting in uniform mixed-matrix membranes. Experimental results show that 20% Ni-gallate doped 6FDA-DAM MMM exhibits the best C2H4/C2H6 separation performance, surpassing the upper limit of pure polymers.

M-gallate MOF/6FDA-polyimide mixed-matrix membranes for C2H4/C2H6 separation

Mixed Matrix Membranes for C2H4/C2H6 Separation Using a Phosphate Anion-Pillared Microporous Material

Enhanced Ethylene Transport of Mixed-Matrix Membranes by Incorporating Anion-Pillared Hybrid Ultramicroporous Materials Via in Situ Growth

Defect-free Mixed-Matrix Membranes Consisting of Anion-Pillared Metal-Organic Frameworks and Poly(ionic Liquid)s for Separation of Acetylene from Ethylene

Affinity Between Metal–Organic Frameworks and Polyimides in Asymmetric Mixed Matrix Membranes for Gas Separations

Mixed-Matrix Membrane Hollow Fibers Of Cu-3(Btc)(2) Mof And Polyimide For Gas Separation And Adsorption

Optimization of a MOF Blended with Modified Polyimide Membrane for High-Performance Gas Separation

High Performance Gas Separation Mixed Matrix Membrane Fabricated by Incorporation of Functionalized Submicrometer-Sized Metal-Organic Framework

Investigation of the effect of Ni and Cu variant MOF-74 in the Polydimethylsiloxane (PDMS)-based Mixed Matrix Membranes (MMMs) for efficient gas separation applications

ZIF-301 MOF/6FDA-DAM polyimide mixed-matrix membranes for CO2/CH4 separation

Cross-Linked Mixed-Matrix Membranes Using Functionalized UiO-66-NH2 into PEG/PPG-PDMS-Based Rubbery Polymer for Efficient CO2 Separation

Mixed-matrix membranes with soluble porous organic molecular cage for highly efficient C3H6/C3H8 separation

Asymmetric Polyimide Mixed Matrix Membranes with Porous Materials-Modified Surfaces for CO2/N2 and CO2/CH4 Separations

6FDA-DAM:DABA Co-Polyimide Mixed Matrix Membranes with GO and ZIF-8 Mixtures for Effective CO2/CH4 Separation

Developing Mixed Matrix Membranes with Good CO2 Separation Performance Based on PEG-Modified UiO-66 MOF and 6FDA-Durene Polyimide

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.

Mixed matrix membranes with intrinsic microporous/UiO-66 post-synthesis modifications with no defects for efficient CO 2 /N 2 separation

Co-fa nanoplates incorporated 6FDA-DAM mixed-matrix membranes for enhanced CO2/CH4 separation

Mixed Matrix Membranes Containing UiO-66(Hf)-(OH)2 Metal–Organic Framework Nanoparticles for Efficient H2/CO2 Separation

PIM-based mixed-matrix membranes containing MOF-801/ionic liquid nanocomposites for enhanced CO2 separation performance

Interpenetrating Networks of Mixed Matrix Materials Comprising Metal-Organic Polyhedra for Membrane CO2 Capture