Abstract:The most popular methods of characterizing a composite's fatigue properties and predicting its life are phenomenological, meaning the micro-mechanisms of composite structures under cyclic loading are not treated. In addition, in order to characterize the fatigue properties, only macro-parameters, namely strength and/or stiffness, are adopted. Residual strength models are mostly used in practice, given their strong relationship with safety and reliability. Indeed, since failure occurs when the strength degrades to the peak stress of fatigue loading, the remaining strength is used as a failure index. In this paper, based on a wide set of literature data, we summarize the capabilities of four models, namely Caprino's, D'Amore's, Sendekyj's, and Kassapoglou's models. The models are briefly described and then applied to the same data set, which is re-elaborated. The selected experimental data are recovered from a large experimental campaign carried out by the Federal Aviation Administration (FAA). Specimens of the same material were subjected to different loading in terms of peak stress, σmax, and stress ratio, R = σmin/σmax, ranging from pure tension (0 < R < 1) to prevalent tension (-1 < R < 0) to tension-compression (R = -1) to pure compression (1 < R < ∞). The data represent a formidable test bed to comparatively evaluate the models' capabilities and their predictive prerogatives. The models are also tested with respect to their ability to replicate the principal responses' feature of composite materials subjected to constant amplitude (CA) loadings. It is shown that Caprino's and D'Amore's models are equally capable of adequately fitting the experimental fatigue life data under given loading conditions and predicting the fatigue behavior at different loading ratios, R, with two fixed parameters. Sendekyj's model required different parameters' sets for each loading condition, and Kassapoglou's model was unable to fit the majority of fatigue life data. When compared on the basis of the residual strength data, only the recently developed D'Amore's model revealed its reliability.

A phenomenological model for off-axis fatigue behavior of unidirectional polymer matrix composites under different stress ratios

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

Multiscale-based multiaxial fatigue model of short fiber reinforced polymer composites under high-cycle proportional loading

Experimental Study and Modeling of Fatigue Life Prediction of Plain Weave Carbon/Polymer Composite under Constant Amplitude Loading

A Methodology to Predict the Fatigue Life under Multi-Axial Loading of Carbon Fiber-Reinforced Polymer Composites Considering Anisotropic Mechanical Behavior

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

Effect of Stress Ratio and Loading Inclination on the Fatigue Life of Carbon-Fiber-Reinforced Polymer Composites: Multiscale Analysis Approach

Comparative Study of Phenomenological Residual Strength Models for Composite Materials Subjected to Fatigue: Predictions at Constant Amplitude (CA) Loading

A critical plane approach for multiaxial fatigue life prediction of short fiber reinforced thermoplastic composites

Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading

Failure Analysis of Fiber-Reinforced Composites under Multiaxial Cyclic Stress

Progressive Fatigue Modelling of Open-Hole Glass-Fibre Epoxy Laminates

Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios

Prediction of the Fatigue Life Based on Stiffness Degradation Concept

Damage-entropy model for fatigue life evaluation of off-axis unidirectional composites

Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites

Progressive fatigue damage modeling of laminated composites using strain-based failure criteria

A Study on the Multi-axial Fatigue Failure Behavior of Notched Composite Laminates

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

A unified damage model for fibrous composite laminae subject to in-plane stress-state and having multi material-nonlinearity

Prediction of Fatigue Life of Polyetherimide/Carbon Fiber Particulate Composites at Various Maximum Stresses and Filler Contents