Abstract:In state-of-the-art lithium ion batteries, separators (microporous membranes) play a passive yet critical role – hosting liquid electrolyte and maintaining physical separation of the electrodes. However, as the demands on lithium ion batteries increase, with an emphasis on greater energy density, longevity (cycle/calendar life), and safety, engineering separators to take a on more active role in the cell (electro)chemistry is expected to be an important strategy. Myriad membrane materials and separator designs have been developed to impart additional functionality, for example, acid and/or transition metal scavenging, temperature responsiveness, enhanced thermal stability, increased ion dissociation, combustion suppression, and mechanical strength. In this talk, I will preset my group's approach to additive manufacturing of next-generation lithium ion battery separators. Our approach is based on polymerization induced phase separation (PIPS), wherein polymerizable monomers (or prepolymer resins) are mixed with porogen. Through rapid, low-cost, readily scalable photopolymerization, the monomers are converted to a crosslinked polymer network, which results in the porogen becoming immiscible and phase separating through spinodal decomposition. By tuning the thermodynamics of the polymer-porogen mixture and photopolymerization kinetics, the porosity and pore size of the resulting polymeric phase can be tuned. We have shown that ethylene carbonate (EC) mixed with common acrylate monomers, such as 1,4-butanediol diacrylate, is an effective porogen. Most importantly because EC is an indispensable component in liquid electrolytes, it does not need to be extracted from the separator prior to incorporation into the electrochemical cell. By controlling the ratio of the 1,4-butanediol diacrylate (BDDA) monomer to EC, monolithic microporous membranes are readily prepared with 25 μm thickness and pore sizes and porosities ranging from 6.8 to 22nm and 15.4% to 38.54%, respectively. The optimal poly(1,4-butanediol diacrylate) (pBDDA) separator has a porosity of 38.5% and average pore size of 22 nm; uptakes 127% liquid electrolyte by mass, and has an ionic conductivity of 1.98 mS/cm, which is higher than that of Celgard 2500. Lithium ion battery half cells consisting of LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathodes and pBDDA separators were shown to undergo reversible charge/discharge cycling with an average discharge capacity of 142 mAh/g and a capacity retention of 98.4% over 100 cycles - comparable to cells using state-of-the-art separators. Furthermore, the pBDDA separators were shown to be thermally stable to 400°C, lack low temperature thermal transitions that can compromise cell safety, and exhibits no thermal shrinkage up to 150°C. I will also discuss my group's efforts to engineer separators with additional functionality to improve cell performance under abuse conditions.

Manipulating the Nanophase Separation of a Polymer-Salt Microfluid Generates an Advanced In Situ Separator for Component-Integrated Energy Storage Devices

Tailoring the Function of Battery Separators Via the Design of MOF Coatings

Progress in polymeric separators for lithium ion batteries

(Invited) Multifunctional Lithium Ion Battery Separators through Polymerization-Induced Phase Separation

In Situ Self‐Polymerization of Thioctic Acid Enabled Interphase Engineering Towards High‐Performance Lithium–Sulfur Battery

Inverse opal-inspired, nanoscaffold battery separators: a new membrane opportunity for high-performance energy storage systems

Sustainable Separators for High‐Performance Lithium Ion Batteries Enabled by Chemical Modifications

In Situ Directional Polymerization of Poly(1,3‐dioxolane) Solid Electrolyte Induced by Cellulose Paper‐Based Composite Separator for Lithium Metal Batteries

Thermally Stable, Nano-Porous and Eco-Friendly Sodium Alginate/attapulgite Separator for Lithium-Ion Batteries

Design Principles of Functional Polymer Separators for High‐Energy, Metal‐Based Batteries

Electrospun PVDF-HFP/PAN bicomponent nanofibers as separators in lithium-ion batteries with high thermal stability and electrolyte wettability

Functionalized Separator for Next-Generation Batteries

High-stability core-shell structured PAN/PVDF nanofiber separator with excellent lithium-ion transport property for lithium-based battery

Interfacial Phase Separation Governs the Chemomechanics of Polymer Electrolytes in High-Voltage, Solid-State Lithium Batteries

Function-directed design of battery separators based on microporous polyolefin membranes

A polymeric separator membrane with chemoresistance and high Li-ion flux for high-energy-density lithium metal batteries

In-situ Polymerized Separator Enables Propylene Carbonate Electrolyte Compatible with High-Performance Lithium Batteries

Electrospun of polyvinyl alcohol composite hydrogel nanofibers prepared by in-situ polymerization: A novel approach to fabricate hydrogel nanofiber membrane for lithium-ion batteries

A viscous oligomer multifunctional separator coating to enable high specific energy lithium-sulfur battery

Sandwiched aramid nanofiber/Al 2 O 3 -coated polyolefin separators for advanced lithium–sulfur batteries

Multifunctional Asymmetric Separator Constructed by Polyacrylonitrile-Derived Nanofibers for Lithium-Sulfur Batteries