Abstract:When studying the process of rock fracture with tools equipped with polycrystalline superhard materials (PSHM) and hard alloys, the main regularities of the fracture mechanism, despite the significant differences in physical and mechanical properties of the used tool materials, are assumed to be identical. This approach not only reduces the efficiency of using the created rock-destroying tools, but also limits the scope of application of polycrystalline superhard materials. Experimental studies using various methods of obtaining information shown significant differences in the mechanism of rock fracture by hard alloys and polycrystalline superhard materials. The study of the zone of the pre-destroyed surface showed that when cutting rocks with PSTM, the process of destruction is carried out not only by the entire polycrystalline plate, but also by ridged diamond formed on the cutting edge and rear surface of the tool. At the same time ridged diamonds, when embedded in the rock, create high contact stresses and an additional network of microcracks interacting with microcracks formed due to the embedding of the entire cutting edge of the plate. The impact of two independent indenters simultaneously increases the zone of the pre-destruction layer in the rock mass, which leads to a more significant decrease in its strength and, as a consequence, to the intensification of the process of rock destruction by the PSTM tool. In case of wrong choice of PSTM application area and operation modes, errors in tool design and insufficient cooling, ridges are not formed on the cutting edge and back surface of the polycrystal. As a result, the polycrystalline insert works as a carbide insert and the efficiency of the PSHM tool is sharply reduced. The use of knowledge obtained as a result of the conducted research makes it possible to create tools equipped with diamond-hard-alloyed inserts, the wear resistance of which is dozens of times higher than that of similar tools made of hard alloy. For example, effective tools equipped with diamond-hard-alloyed inserts have been created and widely introduced into practice for rotary drilling of boreholes, degassing wells, anchoring of mine workings, saw stone cutting, drilling of abrasive permafrost soils and others. Keywords: polycrystalline diamonds cutters (PDC), hard alloys, pre-destruction zone, rock breaking tools, rock destruction.

Developing Technology for the Destruction of Polycomponent Materials

Texture and Mineral Composition of Magmatic Apatite-Nepheline Ores: Technological Consequences (Exemplified by Khibiny)

Developing physical and chemical foundations to manufacture mica phosphate materials for various science-based areas of engineering and construction industry

MODIFICATION OF MINERAL RAW MATERIAL BY RADIATION PRE-TREATMENT BEFORE PROCESSING: FEATURES AND PROSPECTS

Research into the crushing and grinding processes of iron ore with its simultaneous effect by mechanical load and electric field of ultra-high frequency

On the mechanism of rock fracture with tools made of hard alloys and polycrystalline superhard materials

Ni- and Co-struvites: Revealing crystallization mechanisms and crystal engineering towards applicational use of transition metal phosphates

Development of a technology for producing ceramic refractory material in a composition of montmorillonite clays (bentonite-like) and ferrochrome production wastes

Nonthermal Mechanochemical Destruction of POPs

Titanite-Containing Mineral Compositions and Their Chemical Treatment with Preparation of Functional Materials

Pyrometallurgical Treatment of Apatite Concentrate with the Objective of Rare Earth Element Extraction: Part I

Development of an Innovative Technology for the Complex Extraction of Nickel and Cobalt from Iron-Silicate Ores

Treatment of Phosphorus-Containing Raw Materials with Alkaline Solutions

Extraction and reaction mechanism of potassium from associated phosphorus and potassium ore

Deposition of insoluble calcium phosphate layers by combining finely dispersed calcium hydroxide sols with soluble phosphates

Treatment and Destruction of Inorganic Fibers Wastes Like Asbestos by Sodium Polyphosphate

IMPROVING THE DESIGN OF THERMAL TOOLS FOR ROCK FRACTURING

Scientific substantiation and development of innovative processes for the extraction of zirconium and rare earth elements in the deep and comprehensive treatment of eudialyte concentrate

Development of Charge Pelletizing Technology Based on Electric Arc Furnace Dust for Pyrometallurgical Processing in Rotary Kilns

DEVELOPING A TECHNOLOGY FOR OBTAINING FERROMOLIBDENUM FROM MOLYBDENUM CONCENTRATE OF TEGHUT BY THE METHOD OF HIGH-TEMPERATURE SELF-PROPAGATING SYNTHESIS

TECHNIQUE AND TECHOLOGY OF RARE-METAL ORES DESINTEGRATION AND GRAVITY-BASED BENEFICATION