Abstract:The depressed collector is an effective approach to further improve the overall efficiency of high-frequency gyrotron traveling wave tubes (gyro-TWTs). In this article, a multi-gap output isolator is proposed. With similar topologies based on the single-gap output isolator, the multi-gap output isolator offers advantages such as high breakdown voltage, improved microwave transmission, and reduced microwave leakage. The ${Q}$ -band TE01 mode single gap (gap of 2.2 $\times $ 1 mm) and triple gap (gap of 1 $\times $ 3 mm) output isolators are designed and compared in terms of microwave performance and breakdown voltage. Then microwave amplification and beam energy recovery are discussed based on a ${Q}$ -band gyro-TWT with a triple-gap output isolator. Simulation results demonstrate that when driven by a 60-kV to 9.65-A electron beam, the device can stably produce a maximum output power of 205 and 193 kW of recycled power at 47 GHz with a 20-kV depressed collector. The overall efficiency is effectively increased from 35.4% to 53.1%. The mode converter and triple-gap output isolator are fabricated and experimented. Cold test results show that ${S}_{{11}}$ is lower than −13 dB, ${S}_{{21}}$ is greater than −1.3 dB, and are in good agreement with the simulation results. Furthermore, a maximum breakdown voltage of 70.7 kV is measured in the experiment. These investigations provide ideas for achieving efficient operation of high-frequency gyro-TWTs.

Performance Degradation Caused by Ionization of the Released Gas Molecules in W-Band Gyrotron Traveling Wave Tube Based on a Simplified Ionization Model

Mode Distortion and Performance Degradation Caused by Electron-Beam Misalignment in W-Band Gyro-TWTs

Study of A Stable High Power W-Band Gyrotron Traveling Wave Tube Amplifier

Experimental Investigation on Trapped Electrons Oscillation Suppression for W-Band Gyro-TWT

High Average Power Investigation of Dielectric Dissipation in the W-Band Gyro-TWT

The Three-Stage W-Band Gyrotron Traveling Wave Amplifier With Distributed-Loss

Research Progress of Ka Band Gyro-TWTs in IECAS

Linear Full-Wave-Interaction Analysis of A Gyrotron-Traveling-Wave-Tube Amplifier Based on A Lossy Dielectric-Lined Circuit

High Average Power Test of a W-band Broadband Gyrotron Traveling Wave Tube

Design and Cold Test of a G-Band 10-kW-Level Pulse TE 01 -Mode Gyrotron Traveling-Wave Tube

Design of a W-band TE01 mode gyro-TWT amplifier with a lossy ceramic-loaded circuit

Design and Experiment of a 200-kW Q -Band Gyro-TWT

Phase Stability of a Two-Stage W-band TE/sub 01/ Gyro-Traveling-wave-tube with Distributed Loss and Tapered Magnetic Field

Stability Study of A Gyrotron-Traveling-Wave Amplifier Based on A Lossy Dielectric-Loaded Mode-Selective Circuit

Design and Experiment of a Dielectric-Loaded Gyro-TWT With a Single Depressed Collector

Long Pulse and High Duty Operation of a W-Band Gyrotron Traveling Wave Tube

Particle Simulation of a Ka-Band Gyrotron Traveling Wave Amplifier

Investigation of a Multi-Gap, High-Voltage Isolator for a Gyro-TWT With Depressed Collector

Broadband and High Power Meta-Surface Dielectric Window for W-Band Gyrotron Traveling Wave Tubes

Simulation of a 94ghz Second Harmonic Gyrotron Traveling Wave Tube Amplifier with Lossy Ceramic Interaction Region

Design and Analysis of a Magnetron Injection Gun for G-Band TE13 Mode Gyro-TWT