Abstract:Background: Electromagnetic tracking (EMT) is a promising technology that holds great potential to advance patient-specific pre-treatment verification in interstitial brachytherapy (iBT). It allows easy determination of the implant geometry without line-of-sight restrictions and without dose exposure to the patient. What it cannot provide, however, is a link to anatomical landmarks, such as the exit points of catheters or needles on the skin surface. These landmarks are required for the registration of EMT data with other imaging modalities and for the detection of treatment errors such as incorrect indexer lengths, and catheter or needle shifts. Purpose: To develop an easily applicable method to detect reference points in the positional data of the trajectory of an EMT sensor, specifically the exit points of catheters in breast iBT, and to apply the approach to pre-treatment error detection. Methods: Small metal objects were attached to catheter fixation buttons that rest against the breast surface to intentionally induce a local, spatially limited perturbation of the magnetic field on which the working principle of EMT relies. This perturbation can be sensed by the EMT sensor as it passes by, allowing it to localize the metal object and thus the catheter exit point. For the proof-of-concept, different small metal objects (magnets, washers, and bushes) and EMT sensor drive speeds were used to find the optimal parameters. The approach was then applied to treatment error detection and validated in-vitro on a phantom. Lastly, the in-vivo feasibility of the approach was tested on a patient cohort of four patients to assess the impact on the clinical workflow. Results: All investigated metal objects were able to measurably perturb the magnetic field, which resulted in missing sensor readings, that is two data gaps, one for the sensor moving towards the tip end and one when retracting from there. The size of the resulting data gaps varied depending on the choice of gap points used for calculation of the gap size; it was found that the start points of the gaps in both directions showed the smallest variability. The median size of data gaps was ⩽8 mm for all tested materials and sensor drive speeds. The variability of the determined object position was ⩽0.5 mm at a speed of 1.0 cm/s and ⩽0.7 mm at 2.5 cm/s, with an increase up to 2.3 mm at 5.0 cm/s. The in-vitro validation of the error detection yielded a 100% detection rate for catheter shifts of ≥2.2 mm. All simulated wrong indexer lengths were correctly identified. The in-vivo feasibility assessment showed that the metal objects did not interfere with the routine clinical workflow. Conclusions: The developed approach was able to successfully detect reference points in EMT data, which can be used for registration to other imaging modalities, but also for treatment error detection. It can thus advance the automation of patient-specific, pre-treatment quality assurance in iBT.

Intraoperative Localization of Metal Fragment Remained in the Human Body Using Electrical Bioimpedance: a Feasibility Study

Contactless Electrocatheter Tracing within Human Body via Magnetic Sensing: A Feasibility Study

Off‐label application of the breast expander magnet: An alternative approach to enable localisation and removal of ferromagnetic subcutaneous foreign bodies

Design of a system for detection of non-ferromagnetic metallic foreign bodies based in eddy currents and GMI magnetometer

The Feasibility of a Smart Surgical Probe for Verification of IRE Treatments Using Electrical Impedance Spectroscopy

Localization of reference points in electromagnetic tracking data and their application for treatment error detection in interstitial breast brachytherapy

Convolutional Neural Network for non-invasive magnetic foreign body localization in the human body

Interventional removal of human soft-tissue metal foreign bodies under double guiding of regional CT virtual anatomy and roentgenoscopy

Radiofrequency ablation lesion detection using MR-based electrical conductivity imaging: A feasibility study of ex vivo liver experiments

The Novel Use of Rare Earth Magnets for the Extraction of Metallic Soft Tissue Foreign Bodies in Children

An Impedance Probing System for Real-Time Intraoperative Brain Tumour Tissue Discrimination.

An in silico testbed for fast and accurate MR labeling of orthopedic implants

Distortion-Free Magnetic Tracking of Metal Instruments in Image-Guided Interventions

Metal artefact reduction sequences for a piezoelectric bone conduction implant using a realistic head phantom in MRI

Electromechanical Characterization of Human Brain Tissues: A Potential Biomarker for Tumor Delineation

Identification and topographic localization of metallic foreign bodies by metal detector

Advancing intraoperative magnetic tracing using 3D freehand magnetic particle imaging

Radio-Frequency Safety Assessment of Stents in Blood Vessels During Magnetic Resonance Imaging

Human robotic surgery with intraoperative tissue identification using rapid evaporation ionisation mass spectrometry

Foreign Object Detection and Quantification of Fat Content Using A Novel Multiplexing Electric Field Sensor

Improved metal suppression using new generation low-field MRI: a biophantom feasibility study