Abstract:Heat treatment is the most common method to relieve residual stress and to adjust tensile properties in additively manufactured material. However, the well-known strengthening factors (e.g., dislocation density, cellular sub- structure, low angle grain boundaries, nano-oxide particle) in selective laser melted 316 L (SLM 316 L) are strongly influenced by heat-treatment temperature. In this work, horizontal and vertical oriented SLM 316 L specimens are heat treated from 550 degrees C to 1150 degrees C, followed by tensile tests and microstructural characteriza- tion. With increasing temperature, strength (e.g., yield strength, ultimate tensile strength) is found to decrease and elongation is found to increase. The heat treatments of 550 degrees C, 650 degrees C and 750 degrees C lead to coarsening of cellular sub-structure. Furthermore, the cellular sub-structure and melt boundaries annihilate at 950 degrees C. When the temperature reaches 1150 degrees C, SLM 316 L has finished recrystallization with volume fraction of nano-oxide particles increasing greatly. Based on microstructural characterization, the proposed relationship, considering strengthening mechanisms of cellular sub-structure, nano-oxide particle and grain boundaries, give satisfactory accuracy to predict yield strength for horizontal orientation. The yield strength for vertical orientation can also be predicted by this relationship when modified by consideration of anisotropy of columnar grains and lack-of- fusion defects. The anisotropy and lack-of-fusion lead to 5.4% reduction in yield strength for the vertical orientation. This work establishes quantitative relationships for heat treatment-microstructure-property, in which the anisotropy of tensile properties is considered.

Simultaneously improve the strength and ductility of additively manufactured Y 2 O 3 /316 L composites via optimizing heat treatment

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Effects of different heat treatment temperatures on the microstructure and mechanical properties of additive manufacturing Ti65 alloys

Effect of Heat Treatment on Microstructural Evolution in Additively Manufactured 316L Stainless Steel

Tailoring the microstructure and mechanical property of laser powder bed fusion fabricated Ti–6Al–2Sn–4Zr–2Mo via heat treatment

Effect of Precipitation Heat Treatment on a Mechanically Alloyed Al‐Based Composite Reinforced with Metallic Glassy Powder

Effect of homogenization on precipitation behavior and strengthening of 17-4PH stainless steel fabricated using laser powder bed fusion

Microstructure, mechanical properties, and deformation behaviour of LPBF 316L via post-heat treatment

Response of laser power bed fusion manufactured austenitic stainless steel towards combined heat treatment and low-temperature thermochemical surface strengthening

Effects of Solution Treatment Temperatures on Microstructure and Mechanical Properties of TIG–MIG Hybrid Arc Additive Manufactured 5356 Aluminum Alloy

Mechanical behavior and microstructure evolution of Al-Cu-Mg alloy produced by laser powder bed fusion: Effect of heat treatment

Homogenization timing effect on microstructure and precipitation strengthening of 17–4PH stainless steel fabricated by laser powder bed fusion

Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion

The Effect of Solution Aging on the Microstructure and Mechanical Properties of a Laser Powder Bed Fusion-Formed WC-Reinforced 18Ni300 Composite

Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment

Effect of heat treatment temperature on microstructure and tensile properties of austenitic stainless 316L using wire and arc additive manufacturing

Effect of heat treatment on the microstructure and mechanical property of W/316L multi-material fabricated by selective laser melting

Effect of heat treatment on interface behavior of martensite/austenite multilayered composites by accumulative hot roll bonding

Design of a Thermally Stable Heat-Resistant (Al2O3+Al3Ti)/Al Composite with Excellent High-Temperature Mechanical Properties: Multimechanism Synergistic Strengthening Strategy