The Coupling Use of Weak Magnetic Field and Fe0/H2O2 Process for Bisphenol a Abatement: Influence of Reaction Conditions and Mechanisms

Liping Liang,Fenfen Xi,Liubiao Cheng,Weishou Tan,Qiang Tang,Xu Meng,Zhenjiong Wang,Bo Sun,Aijie Wang,Jian Zhang
DOI: https://doi.org/10.3390/w13131724
IF: 3.53
2021-06-22
Water
Abstract:The coupling use of the heterogeneous Fenton-like process (zero-valent iron (Fe0)/H2O2) and weak magnetic field (MWF) for bisphenol A (BPA) abatement was systematically investigated in this study. Though both the Fe0/H2O2 and WMF-Fe0/H2O2 processes are sensitive to pH, WMF remarkably enhanced BPA removal under the pH range of 3.0–6.0 by 0.5–9.5 times. The characterization of Fe0 confirmed the role of WMF in promoting the corrosion of Fe0. Radicals, rather than Fe intermediates, were responsible for BPA degradation. Due to the presence of Cl– as the background ions and its reactivity towards HO•, reactive chlorine species (RCS, i.e., Cl• and Cl2•−) were produced and considerably contributed to BPA degradation. In addition, ~37% and 54% of degraded BPA was ascribed to RCS in the presence of 2 and 100 mM of Cl−, respectively. However, 1.9 mg/L of ClO3− was detected in the presence of 2 mM of Cl− in the WMF- Fe0/H2O2 process. HCO3− could diminish ClO3− generation significantly through transforming RCS. The concentration of ClO3− decreased by 74% and 82% with dosing 1 and 10 mM HCO3−, respectively. The results of this study suggest that the WMF-Fe0/H2O2 process is a promising approach for BPA removal.
environmental sciences,water resources
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the removal efficiency of bisphenol A (BPA) in the water treatment process. Specifically, the researchers explored methods to improve the BPA removal rate by using a combination of a weak magnetic field (WMF) and zero - valent iron/hydrogen peroxide (Fe0/H2O2) processes. The study focused on the influence of reaction conditions (such as pH value, doses of Fe0 and H2O2) on the BPA removal effect, and analyzed the mechanisms of BPA degradation under different conditions. In addition, the paper also examined the influence of background ions (such as chloride ion Cl− and bicarbonate ion HCO3−) on the active substances generated during the BPA degradation process and their functions, especially the role of reactive chlorine species (RCS). Through these studies, the author aims to provide a new and more efficient treatment method for the effective removal of BPA.