Abstract:The LHCb experiment(Fig. 1), that is presently taking data at CERN (European Center for Nuclear Research) Large Hadron Collider (LHC), aims at the study of CP violation in the B meson sector. Its key elements is the Muon detector [1], which allows triggering, and muon identification from inclusive b decays. The electronic system (Fig. 2) of the whole detector is very complex and its Muon detector Experiment Control System (ECS) allows monitoring and control of a number of Front-End boards in excess of 7000. The present system in charge of controlling Muon detector Front-End (FE) Electronics consists of 10 Crates of equipment; each crate contains two kinds of modules: a Pulse Distribution Module (PDM) and up to 20 Service Boards (SB) connected via a custom Backplane for a total amount of about 800 microcontrollers[2]. LHCb upgrade is planned for 2018/19, which will allow the detector to exploit higher luminosity running. This upgrade will allow the experiment to accumulate more luminosity to allow measurements that are more precise. The main idea of the new architecture take advantage of the new CERN fast communication protocol GBT[3] developed for radiation environment leaving unchanged the huge connectivity to the detector and the modularity of the system. The new chipset GBTx and GBT-SCA[4] developed at CERN and the availability of more powerful computers allow designing a new system with fast link to the detector. In the new system, the control unit are moved from the apparatus to the computers in control room instead of the actual system where the low speed bus send high level commands to intelligent unit in the detector.

Enhancement of magnetic ordering by the stress fields of grain boundaries in ferromagnets

Design and Development of the Control System for a Compact Carbon-14 AMS Facility

EPICS Based Computer Control System for ERL Accelerator

Bpm system design for the bepcii storage ring

Architecture of the LHCb muon Frontend control system upgrade

BEAM INSTABILITIY STUDIES OF BEPC AND BEPCII

The Upgrade of EAST Central Control System in PXI Platforms

The Upgrade System of BESIII ETOF with MRPC Technology

COLLECTIVE EFFECTS STUDY FOR BEPCII

Design of PLC and EPICS Based Control System for a Deuteron RFQ

Upgrade of the Accelerator Control System in NSRL Phase Ⅱ Project

PLC Control System for the PKUNIFITY

THE CONTROL SYSTEM DEDICATED FOR BEAM LINE OF PROTON RADIOGRAPHY TEST-STAND ON A 100 MeV CYCLOTRON CYCIAE-100 *

The Upgrade of PKUAMS Control System

Design and Implementation of Control System for CYCIAE-100 Cyclotron Beam Line of Proton Radiography

Status and prospects for BESIII

PLC control system for the Pkunifty

Upgrade of EAST Central Control System

Real Time Bunch-by-Bunch Luminosity Monitor for BEPCII

Test of High Time Resolution Mrpc with Different Readout Modes for the Besiii Upgrade

Construction of the BEPC II RF system