Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

The Delay-Insensitivity, the Hazard-Freedom, the Semi-Modularity and the Technical Condition of Good Running of the Discrete Time Asynchronous Automata

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

A Novel Control Strategy for the Power Supply to Achieve the 45 T / 600 ms Flat-Top Field

Modelling and design of permanent magnet multipoles for beam transport and focusing. II. Configuring the quad

Magnetic Field Measurement, Shimming and Processing for 230 MeV Superconducting Cyclotron Main Magnet

Development of Control System Applied to Compact Pulsed High Magnetic Field Facility

A novel control strategy for the power supply to achieve the 45 T/600 ms flat-top field | Nowa metod sterowania układem zasilania elektromagnesu umożliwiaja{ogonek}ca otrzymanie pola magnetycznego 45 T

Control System for Electromagnet Power Supplies

The Development of Magnetic Field Measurement System for Drift-Tube Linac Quadrupole

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Design and Research of Magnetic Field Mapping System for SC200

A Control System of New Magnet Power Converter for J-PARC Main Ring Upgrade

Development of a Real-Time Magnetic Field Measurement System for Synchrotron Control

Realization of Toroidal Field Power Supply Control System for J-TEXT Tokamak

A fast-switching magnet serving a spallation-driven ultracold neutron source

Design of high voltage power supply and control system for gyrotron test bench

The Power Supply System for the J-TEXT Poloidal Field

Design of the ITER TF Magnet Feeder Systems

Design of a 70T Quasi-Continuous High Magnetic Field System with a Dual-Coil Magnet

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Design and Analysis of a Combined Power Supply for High-Field Quasi-Continuous Magnets