Abstract:This work explores the use of Ce and rapid solidification to attain primary Si modification in a hypereutectic Al-40wt-%Si alloy. Al–40Si and Al–40Si–1.5Ce powders were produced by Impulse Atomization. The resulting powders having increasing liquid cooling rate from ∼10 3 to ∼10 5 K/s were studied to determine the effect of Ce on the microstructure. The microstructures of both alloys contained an Al-rich halo (α-Al) which is not part of Gulliver-Scheil solidification paths. The presence of this structure suggests solidification of both alloys deviated from local equilibrium. In both alloys, increasing cooling rate was associated with the formation of less elongated primary Si presenting a more rounded surface. Additionally, alloying with Ce improved the distribution of primary Si in the microstructures of the smallest powders. Quantitatively, the microstructures of both alloys were found to increase in primary Si and halo (α-Al) content as cooling rate increases. The use of Ce also led to a measurable decrease in eutectic content in Al–40Si–1.5Ce with respect to the unmodified alloy. Similarly, primary Si and halo (α-Al) vol.-% also appear to increase as a result of Ce addition. Ce travail explore l'utilisation du Ce et de la solidification rapide pour atteindre une modification primaire du Si dans un alliage hypereutectique Al-40% en poids de Si. On a produit les poudres Al–40Si et Al–40Si–1.5Ce par atomisation par impulsion. On a étudié les poudres résultantes ayant une vitesse de refroidissement liquide croissante de ∼ 10 3 à ∼10 5 K/s afin de déterminer l'effet du Ce sur la microstructure. La microstructure des deux alliages contenait un halo riche en Al (Al-α) qui ne fait pas partie des voies de solidification de Gulliver-Scheil. La présence de cette structure suggère que la solidification des deux alliages déviait de l'équilibre local. Dans les deux alliages, l'augmentation de la vitesse de refroidissement était associée à la formation de Si primaire moins allongé présentant une surface plus arrondie. De plus, l'alliage avec Ce a amélioré la répartition du Si primaire dans la microstructure des poudres plus petites. Quantitativement, on a constaté que la teneur en Si primaire et en halo (Al-α) dans la microstructure des deux alliages augmentait à mesure que la vitesse de refroidissement augmentait. L'utilisation de Ce a également amené une diminution mesurable de la teneur en eutectique dans l'Al-40Si–1.5Ce par rapport à l'alliage non modifié. De la même manière, le pourcentage en volume de Si primaire et de halo (Al-α) semble également augmenter en raison de l'ajout de Ce.

Effects of rapid solidification and Ce on the microstructure of Al–40Si

Enhancing Silicon Refinement in an Al-25Si Hypereutectic Alloy by High Cooling Rate and La–Ce–Y Modifiers

Refining Mechanism and Elevated-Temperature Mechanical Properties of Al-Ce Alloys Solidified under Super Gravity Field

Effect of Ce Content on the Microstructure of Semisolid Mg-10Al Alloy

Effect of Ce Content on the Microstructure and Mechanical Properties of Squeeze-Cast Al–5Mg-2.2Si-0.6Mn Alloys

Effects of Ce content on the modification of Mg2Si phase in Mg-5Al-2Si alloy

Effect of Ce and solidification cooling rate on the microstructure and mechanical properties of AA2017 aluminum alloy

Multi-scale investigation of A356 alloy with trace Ce addition processed by laser surface remelting

Physical properties and solidification structure of Al-Si eutetic alloy melt with cerium modification

Microstructure and mechanical properties of as casted Al-Si-Sc-Ce alloys prepared by molten salt electrolysis with varied cooling rate

Effect of rare earth Ce on the microstructure and mechanical properties of cast Al–7Si alloys

Effect of Ce Content on the Microstructure and Mechanical Properties of Al-Cu-Li Alloy

Effect of Addition of La and Ce on Solidification Behavior of Al-Cu Alloys

Microstructure and creep properties of cast hypereutectic Al-11Ce alloy with Si addition

Physical properties and solidification structure of Al-Si eutectic alloy melt with cerium modification

Microstructure and Mechanical Properties of Ti44Al6Nb Alloys with Different Cerium Contents

Cerium Addition Effect on Modification of Inclusions, Primary Carbides and Microstructure Refinement of H13 Die Steel

Effect of Ce Addition on Modifying the Microstructure and Achieving a High Elongation with a Relatively High Strength of As-Extruded AZ80 Magnesium Alloy

Effect of rare earth La–Ce on solidification structure of 3.2%Si-0.9%Al non-oriented silicon steel

Effect of Cerium Content on Non–Metallic Inclusions and Solidification Microstructure in 55SiCr Spring Steel

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy