Abstract:The analytical and especially the numerical calculations of the magnetic fields of highly saturated electrical machines require a correctly given magnetizing curve. In practice, professional software may use many points of the magnetizing curve (sometimes 50 or more points). There is a high probability that a point will be entered or measured incorrectly. We have therefore set ourselves three objectives. The first is to reduce the number of points given. The second is to ensure that the curve is given analytically (in the form of orthogonal polynomials) and is as smooth as possible. This means that the derivatives of the reluctance are also as smooth as possible. Therefore, the Newton–Raphson iteration procedure in numerical calculations converges rapidly. The third objective was to make the magnetizing curve continue beyond a magnetic field density of 2 T up to about 3 T. Most professional programs simply limit the magnetizing curve to about 2.2 T. This limitation makes it impossible to calculate accurately the magnetic field in the bridges, especially when the slots in the rotor are closed. Local fields can exceed values of 2.2 T. A solution has been found. It uses higher order orthogonal polynomials. It has been shown that 12 given points of the magnetizing curve is enough to give a good approximation of the measured curve. However, one polynomial function is not enough. We need three functions and another exponential function for magnetic field densities above around 2 T up to a value of relative permeability equal to 1. In the numerical calculation of the field, we thus achieve the desired error (residual) vector of the Newton–Raphson iterative procedure in 10 ÷ 15 steps for semi-closed slots and 20 ÷ 30 steps for closed slots.

Comparison of nonlinear solution methods for magnetic equivalent circuits of saturated induction motors

Advanced Computational-Time Reduction Technology of Nonlinear Fourier-Based and Magnetic Circuit Hybrid Model

A Novel Analytical Frozen Permeability Method for Saturated Surface-Mounted Permanent Magnet Machines

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

Comparison Of Axial Flux Pm Synchronous Motor And Induction Motor By Mathematical And Finite Element Analysis

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Torque Analytical Model of Switched Reluctance Motor Considering Magnetic Saturation

Non-linear Modeling and Simulation of Induction Motor

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Nonlinear Magnetics Model for Permanent Magnet Synchronous Machines Capturing Saturation and Temperature Effects

Nonlinear Analytical Modelling for Surface-Mounted Permanent Magnet Motors with Magnet Defect Fault

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Efficient Approximation Procedure for Magnetization Characteristics Used in Performance Analysis of Highly Saturated Electrical Machines

Nonlinear modeling and simulation of induction machine

Comparison of a quasi Newton method using Broyden's update formula and an adjoint method for determining local magnetic material properties of electrical steel sheets

Finite Element Analysis of Different Transverse Flux Linear Induction Motor Models to Improve the Performance of the Main Magnetic Circuit

Nonlinear Analytical Solution of Magnetic Field and Performances of a Spoke Array Vernier Permanent Magnet Machine

On the convergence of higher order finite element methods for nonlinear magnetostatics

A High-Fidelity and Computationally Efficient Model for Interior Permanent-Magnet Machines Considering the Magnetic Saturation, Spatial Harmonics, and Iron Loss Effect