Abstract:Superconducting power transmission cables are regarded as a key to realize the next-generation power systems with high capacity and high efficiency, and 4 mm coated conductors have been broadly used as a standard to develop such cables. Recent research shows that, comparing with standard 4 mm coated conductors, narrow 2 mm coated conductors prove to have a pronounced advantage on AC loss reduction for superconducting cables. Besides, thanks to laser cutting technique, it became possible to cut wide coated conductors into small tapes as narrow as 2 mm without considerable damage. Hence, narrow 2 mm coated conductors are attracting more and more attentions and have turned into a potential option for developing more efficient superconducting cables. So far, there have been many discussions on AC loss characteristics of the superconducting cables consisting of 4 mm coated conductors, whereas, the studies on cables comprising narrow 2 mm coated conductors are very few. This paper is to clarify the AC loss characteristics of superconducting cables consisting of narrow 2 mm coated conductors, especially to analyze the dependence of AC loss on the number of layers, with the intention of studying the effect of multilayer configuration on AC losses of such cables. A set of numerical models simulating such superconducting cables have been developed by applying 2-D FEM method. This set of models comprises 1-layer, 2-layer, 4-layer and 6-layer cables, with the former three types of cables as practical cables under development and the last one as a future option. Narrow 2 mm coated conductors with the same critical current and current distribution were selected for all the cables. Within these cables, numerical electromagnetic field analysis has been carried out for AC loss calculation and comparison.

Evaluation of AC Copper Loss Reduction Effect of Magnetic‐Coated Flat Wire

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Low Copper Loss and High Efficiency of Wireless Power Transmission Coil using Magnetic Flux Path Control Technology

Investigation on Loss Reduction Strategies of Single-Core HVAC Submarine Cables

Inhomogeneous Winding for Loosely Coupled Transformers to Reduce Magnetic Loss

Design And Optimizations Of Solenoid Magnetic Structure For Inductive Power Transfer In Ev Applications

Comprehensive Analysis of the AC Copper Loss for High Speed PM Machine With Form-Wound Windings

Magnetic flux penetration and AC loss in a composite superconducting wire with ferromagnetic parts

Study on AC Copper Losses in an Air-Cored Axial Flux Permanent Magnet Electrical Machine with Flat Wires

Investigation of AC Copper Loss Considering Effect of Field and Armature Excitation on IPMSM With Hairpin Winding

Investigation and Comparison of Different Calculation Methods for AC Copper Loss of Flat Copper Wire in Axial Flux Permanent Magnet Motor

Experimental AC loss study on REBCO coil assemblies coupled with an iron cylinder

Comparative Study on Magnetic Properties and Microstructure of As-prepared and Alternating Current Joule Annealed Wires

An Investigation on AC Loss Reduction for Permanent-Magnet Superconducting Electrical Machine

Effect of Multilayer Configuration on Ac Losses of Superconducting Power Transmission Cables Consisting of Narrow Coated Conductors

AC loss modelling in superconducting coils and motors with parallel tapes as conductor

Measurement and calculation for high frequency magnetic losses of Terfenol-D alloy rod under coupled stress and DC bias fields

Effect of substrate magnetism on the ac loss of high temperature superconductor tape-wound coils