Abstract:The objective of the proposed research is to develop plasma soft X-ray (SXR) radiation imaging that includes spectral information in addition to standard SXR tomography for the purpose of studying, for example, tungsten transport and its interplay with magnetohydrodynamics (MHD) in tokamak plasmas in an ITER-relevant approach. The SXR radiation provides valuable information about both aspects, particularly when measured with high spatial and temporal resolution and when tomographic reconstructions are performed. The spectral data will facilitate the tracking of both light and high-Z impurities. This approach is pertinent to both the advancement of a detailed understanding of physics and the real-time control of plasma, thereby preventing radiative collapses. The significance of this development lies in its ability to provide three-dimensional plasma tomography, a capability that extends beyond the scope of conventional tomography. The utilization of two-dimensional imaging capabilities inherent to Gas Electron Multiplier (GEM) detectors in a toroidal view, in conjunction with the conventional poloidal tomography, allows for the acquisition of three-dimensional information, which should facilitate the study of, for instance, the interplay between impurities and MHD activities. Furthermore, this provides a valuable opportunity to investigate the azimuthal asymmetry of tokamak plasmas, a topic that has rarely been researched. The insights gained from this research could prove invaluable in understanding other toroidal magnetically confined plasmas, such as stellarators, where comprehensive three-dimensional measurements are essential. To illustrate, by attempting to gain access to anisotropic radiation triggered by magnetic reconnection or massive gas injections, such diagnostics will provide the community with enhanced experimental tools to understand runaway electrons (energy distribution and spatial localization) and magnetic reconnection (spatial localization, speed…). This work forms part of the optimization studies of a detecting unit proposed for use in such a diagnostic system, based on GEM technology. The detector is currently under development with the objective of achieving the best spatial resolution feasible with this technology (down to approximately 100 µm). The diagnostic design focuses on the monitoring of photons within the 2-15 keV range. The findings of the optimization studies conducted on the amplification stage of the detector, particularly with regard to the geometrical configuration of the GEM foils, are presented herein. The impact of hole shape and spacing in the amplifying foils on the detector parameters, including the spatial size of the avalanches and the electron gain/multiplication, has been subjected to comprehensive numerical analysis through the utilization of Degrad (v. 3.13) and Garfield++ (v. bd8abc76) software. The results obtained led to the identification of two configurations as the most optimal geometrical configurations of the amplifying foil for the three-foil GEM system for the designed detector. The first configuration comprises cylindrical holes with a diameter of 70 μm, while the second configuration comprises biconical holes with diameters of 70/50/70 μm. Both configurations had a hole spacing of 120 μm.

Study of the pellet ablation cloud using the tomography technique for two-directional simultaneous photography in GAMMA 10/PDX

Pellet Enhanced Performance on the Hl-2a Tokamak

1 EX / P 3-21 Plasma Behavior with Hydrogen Supersonic Molecular Beam and Cluster Jet Injection in the HL-2 A Tokamak

Structure of pellet cloud emission and relation with the local ablation rate

Development of a precise size-controllable pellet injector for the detailed studies of ablation phenamena and mechanism

Near-field simulations of pellet ablation for disruptions mitigation in tokamaks

Simulation study of deuterium pellet ablation and deposition in the EAST tokamak with HPI2 code

Activities on the Laser Fusion Reactor Koyo-F in Japan

The Simulation of the Energy Deposition from Runaway Electrons in Plasma Facing Components with EGS4

Transonic ablation flow regimes of high-Z pellets

Plasma Shutdown System for Fusion Experimental Reactors

Four-dimensional conditional averaging tomography of rotating plasma ejection from cylindrical detached plasma

Shattered pellet injection technology design and characterization for disruption mitigation experiments

Fuelling of deuterium-tritium plasma by peripheral pellets in JET experiments

Preliminary Experimental Results of Pellet Injection on the HL-2A Tokamak

Multi-pellet injection into the NBI-heated phase of TJ-II plasmas

Optimization of pellet design parameters to achieve deep fueling depth in EAST plasma with PAM code

Microstability analysis of pellet fuelled discharges in MAST

Highly resolved measurements of dust motion in the sheath boundary of magnetized plasmas

High-performance plasmas after pellet injections in Wendelstein 7-X

Two-Dimensional Plasma Soft X-ray Radiation Imaging System: Optimization of Amplification Stage Based on Gas Electron Multiplier Technology