Abstract:In practical engineering, cyclic shear stresses induced by earthquakes, traffic, and waves are superimposed on the initial static shear stress in sand fills or deposits, leading to complex responses of soils such as their deformation characteristics, pore pressure generation, and susceptibility (or cyclic resistance) to liquefaction. To experimentally investigate the undrained cyclic response of saturated sand, a series of triaxial tests were performed, covering a broad range of initial static and cyclic deviatoric stress levels. The results indicate that different stress conditions lead to two types of cyclic behavior: cyclic mobility and residual deformation accumulation. The compressional static stress is beneficial to the cyclic resistance of the dense sand, whereas the extensional static stress is regarded as detrimental as it tended to reduce the cyclic strength. Moreover, by comparing the available test data obtained from the same sand with varying initial densities and confining pressures, the static shear effect on cyclic resistance was found to be dependent on the state of the sand. Compared to the interpretation made using the limiting pore pressure-based criterion, the conventional failure criterion using a cyclic axial strain of 5% may lead to a substantial overestimation of the cyclic resistance, thus resulting in unsafe assessment and design. Hence, by employing the pore pressure criterion, the pore pressure generated in the cyclic tests was investigated and was found to be significantly influenced by the static shear stress. A pore pressure generation model is proposed to obtain the pore pressure characteristics of sand under various static shear stress conditions.

Assessment of Free Energy Functions for Sand

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Energy-Based Approach to Quantify Cyclic Resistance and Pore Pressure Generation in Anisotropically Consolidated Sand

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

A thermodynamic critical state model for sands

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

Bounding surface plasticity for sand using fractional flow rule and modified critical state line

Micromechanics-based multimechanism bounding surface model for sands

A Thermodynamic Constitutive Model for Saturated Sand

Review of Proposed Stress-dilatancy Relationships and Plastic Potential Functions for Uncemented and Cemented Sands

Small-strain Shear Moduli Modeling of Sand: a Non-Equilibrium Thermodynamic Approach, Including an Application to Leighton Buzzard Sand

Pure elastic stiffness of sand represented by response envelopes derived from cyclic triaxial tests with local strain measurements

A hypoplastic model for unsaturated sand accounting for drying and wetting cycles

A Quasi-Static And Hysteretic Constitutive Model For Sand Based On Granular Solid Hydrodynamics: A Triaxial Compression Example

SANISAND‐FN: An evolving fabric‐based sand model accounting for stress principal axes rotation