Abstract:Metallic sodium (Na) has been regarded as one of the most attractive anodes for Na-based rechargeable batteries due to its high specific capacity, low working potential, and high natural abundance. However, several important issues hinder the practical application of the metallic Na anode, including its high reactivity with electrolytes, uncontrolled dendrite growth, and poor processability. Metal nitrates are common electrolyte additives used to stabilize the solid electrolyte interphase (SEI) on Na anodes, though they typically suffer from poor solubility in electrolyte solvents. To address these issues, a Na/NaNO3 composite foil electrode was fabricated through a mechanical kneading approach, which featured uniform embedment of NaNO3 in a metallic Na matrix. During the battery cycling, NaNO3 was reduced by metallic Na sustainably, which addressed the issue of low solubility of an SEI stabilizer. Due to the supplemental effect of NaNO3, a stable SEI with NaNxOy and Na3N species was produced, which allowed fast ion transport. As a result, stable electrochemical performance for 600 h was achieved for Na/NaNO3||Na/NaNO3 symmetric cells at a current density of 0.5 mA cm–2 and an areal capacity of 0.5 mAh cm–2. A Na/NaNO3||Na3V2(PO4)2O2F cell with active metallic Na of ∼5 mAh cm–2 at the anode showed stable cycling for 180 cycles. In contrast, a Na||Na3V2(PO4)2O2F cell only displayed less than 80 cycles under the same conditions. Moreover, the processability of the Na/NaNO3 composite foil was also significantly improved due to the introduction of NaNO3, in contrast to the soft and sticky pure metallic Na. Mechanical kneading of soft alkali metals and their corresponding nitrates provides a new strategy for the utilization of anode stabilizers (besides direct addition into electrolytes) to improve their electrochemical performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01571?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01571</a>.Additional digital and SEM images; additional XPS results; additional CVs and Nyquist plots; additional Tables for the fitting results of the Nyquist plots; and additional voltage profiles, cycle performance, and voltage curves (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01571/suppl_file/am1c01571_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Introduction of a nitrate anion with solubility mediator in a carbonate-based electrolyte for a stable potassium metal anode

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Salt Engineering Toward Stable Cation Migration of Na Metal Anodes

A Dual‐Functional Electrolyte Additive for High‐Performance Potassium Metal Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Addressing the Low Solubility of a Solid Electrolyte Interphase Stabilizer in an Electrolyte by Composite Battery Anode Design

Ultrastable Sodium/Potassium Metal Anode Enabled by a Multifunctional Interphase Layer with Enhanced Ion Transport Kinetics

Regulating the Solvation Structure of Electrolyte via Dual–Salt Combination for Stable Potassium Metal Batteries

Integration of Homogeneous and Heterogeneous Nucleation Growth Via 3D Alloy Framework for Stable Na/K Metal Anode

Homogeneous Metallic Deposition Regulated by Porous Framework and Selenization Interphase Toward Stable Sodium/Potassium Anodes

Liquid Alloying Na-K for Sodium Metal Anodes

Lithium Nitrate Solvation Chemistry in Carbonate Electrolyte Sustains High-Voltage Lithium Metal Batteries.

Composition Analysis of the Solid Electrolyte Interface of NaK Anodes in Na-Ion Batteries

Extremely Accessible Potassium Nitrate (KNO3) as the Highly Efficient Electrolyte Additive in Lithium Battery.

Highly Stable Sodium Metal Batteries Enabled by Manipulating the Fluorinated Organic Components of Solid‐Electrolyte‐Interphase

Durable Integrated K‐Metal Anode with Enhanced Mass Transport through Potassiphilic Porous Interconnected Mediator

Organic Nitrate Additive for High‐Rate and Large‐Capacity Lithium Metal Anode in Carbonate Electrolyte

Dendrite-free and gasless potassium metal anodes assisted by the mechanical-electrochemical enhancing solid K-electrode and electrolyte interface

3D Printed Sodiophilic Nb2CTx/Reduced Graphene Oxide Monoliths Enable Long Cycle Stability of Sodium Metal Anodes

Nitrate Additives Coordinated with Crown Ether Stabilize Lithium Metal Anodes in Carbonate Electrolyte

Novel Quasi‐Liquid K‐Na Alloy as a Promising Dendrite‐Free Anode for Rechargeable Potassium Metal Batteries