Abstract:In the present study, both the impact and vibration response characteristics of fiber reinforced polymer (FRP) sandwich plates (FRPSPs) with a foam core (FC) reinforced by chopped fiber rods (CFRs) are investigated. Initially, a dynamic model is proposed to predict the vibro-impact characteristics of the FC-CFRs-FRPSP structures. Here, by considering the influence of the dispersion pattern of chopped fiber rods, the equivalent material parameters of this complex core are redefined. Also, by employing the modified mid-plane displacement equation based on the principle of virtual work at the impact point, together with the progressive quasi-static approach and Reddy's high-order shear deformation principle, the key parameters such as impact contact force and displacement related to each failure event are obtained. In addition, with consideration of the impact damage, the natural frequencies and vibration responses are solved by using the energy principle, the proportional damping method, and the Duhamel integral technique. Finally, a number of the FC-FRPSP specimens with and without reinforcement of CFRs are fabricated and tested under different impact energies for verifying the present model. Also, the influences of critical geometric and material parameters on the vibro-impact response of the FC-CFRs-FRPSP structures are discussed. It has been found that the FC-CFRs-FRPSP specimens have a smaller vibro-impact response compared to the specimens without CFRs. For example, when impact energy of 10 J is applied, the impact peak force increases by 19.1%, the impact displacement reduces by 26.6%, and the maximum time-domain vibration response reduces by 5.8%. To reduce the vibro-impact response of such structures, it is recommended to adopt a large thickness ratio of the CFR reinforced foam core to the overall sandwich plate as well as volume fraction of CFRs to the foam core with a uniform dispersion pattern.

Low-velocity impact on a CFRP sandwich plate with a reentrant auxetic core

Low Velocity Impact Response of Preloaded CFRP/Aluminum Honeycomb Sandwich Plate

Low-velocity Impact Response of Sandwich Plates with GRC Face Sheets and FG Auxetic 3D Lattice Cores

Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

Vibro-impact response of FRP sandwich plates with a foam core reinforced by chopped fiber rods

Nonlinear Low-Velocity Impact Analysis of Sandwich Plates with Titanium Face Sheets and Porous Aluminum Core Reinforced by GPLs

Dynamic response and failure of CFRP Kagome lattice core sandwich panels subjected to low-velocity impact

Application of Auxetic Core to Improve Dynamic Response of Sandwich Panels Under Low-Velocity Impact

Low-velocity Impact on Square Sandwich Plates with Fibre-Metal Laminate Face-Sheets: Analytical and Numerical Research

Low-velocity Impact of Rectangular Multilayer Sandwich Plates

Low‐velocity impact response of 3D carbon fiber reinforced polymer auxetic lattice structures

Residual Compressive Strength of Aluminum Honeycomb Sandwich Structures with CFRP Face Sheets after Low-velocity Impact

Experiment and finite element analysis of lattice reinforced composite sandwich panels subjected to low-velocity impact

Vib-Acoustic Analysis of Viscoelastic Composite Sandwich Plates with Transversely Deformable Core

Mechanical Behaviors of Composite Auxetic Structures under Quasi-Static Compression and Dynamic Impact

Study on low-velocity impact response and residual strength of ultralight all-CFRP sandwich structure

Low-Velocity Impact Behavior and Damage Characteristics of CFRP Laminates

On Influence of Face Sheet Distributions on Low-Velocity Impact Failure of Metal Honeycomb Core Sandwich Plates

Experimental and numerical impact behavior of fully carbon fiber sandwiches for different core types

Damage Mechanisms and Analytical Model of CFRP Laminate under Low-Velocity Normal and Oblique Impacts

The impact and post-impact flexural behaviors of CFRP/aluminum-honeycomb sandwich