Abstract:The anode -free solid-state lithium battery (AFSSLB) is a type of lithium battery that utilizes an initial charging process to generate lithium metal as the anode. With a 1 : 1 anode -to -cathode capacity ratio, it enables any lithiated cathode system to achieve a maximal energy density. Furthermore, the incorporation of inorganic solid electrolytes in the AFSSLB greatly enhances its intrinsic safety. However, the AFSSLB faces challenges related to interfacial issues between the electrolyte and collector. During the cycling process, uneven lithium -ion flux can result in contact loss and dendrite growth, ultimately leading to rapid battery failure. Addressing these interfacial problems is crucial for the successful implementation and performance of AFSSLBs. The absence of initial lithium metal material prevents the battery system from accommodating additional lithium through a modified anode. Instead, it relies on high Coulomb efficiency during cycling. Consequently, ensuring continuous and uniform contact at the anode interface is crucial for maintaining the reversibility of lithium deposition. Herein, a nanocomposite current collector is introduced to enhance the interface between the collector and electrolyte in AFSSLB. In this approach, silver nanoparticles are dispersed within the carbon materials to construct a composite current collector. The incorporation of the silver -carbon nanocomposite layer results in a low interfacial impedance of 10 ohmcm-2, indicating that the electrolyte -collector interface maintains contact throughout the charging and discharging processes. The focused ion beam (FIB) technology and electron microscopy were employed to analyze the battery cross sections, revealing that lithium metal could be deposited in a thickness of more than 25 mu m without short-circuiting using this silver -carbon nanocomposite current collector. The solid-state batteries equipped with nanocomposite current collectors exhibited an enhanced dissolution of silver in the lithium metal, leading to the formation of abundant lithiophilic sites. The nanocomposites facilitate the rapid transfer of Li atoms within the anodes, thus achieving uniform lithium metal deposition. Theoretical analysis using the nucleation equation demonstrates that using nano -silver as a current collector can reduce the nucleation work required for deposition by at least four orders of magnitude. The smaller nucleation force contributes to the uniform and stable deposition of lithium metal during continuous cycling. The solid-state batteries demonstrated improved interfacial contact, resulting in the uniform and stable lithium metal deposition of over 7.0 mAhcm-2 for more than 200 cycles at 0.25 mAcm-2. The cycling performances of all -solidstate batteries can be significantly improved through the design of nanocomposite collectors. This presents an effective strategy for advancing the practical implementation of all -solid-state lithium metal batteries, particularly those utilizing an anode -free configuration.

Sputtered silver on the current collector for anode-less NMC111 gel polymer electrolyte lithium batteries

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Nonmetal Current Collectors: The Key Component for High‐Energy‐Density Aluminum Batteries

Metal/nanocarbon Layer Current Collectors Enhanced Energy Efficiency in Lithium-Sulfur Batteries

Lithiophilic silver nanowires-fenced three-dimensional carbon cloth current collector for dendrite-free lithium deposition

Three-Dimensional Nickel Foam-Based Lithiophilic LPP-Ni3S2@Ni Current Collector for Dendrite-Free Lithium Anode

A High‐Performance Lithium Metal Battery with Ion‐Selective Nanofluidic Transport in a Conjugated Microporous Polymer Protective Layer

Constructing nanoporous Ni foam current collectors for stable lithium metal anodes

Gradient Lithium Ion Regulation Current Collectors for High-Performance and Dendrite-Free Li Metal Batteries

High Performance Anode-Free Lithium Pouch Cells Employing Lithiophilic Gel Polymer Electrolyte with Ion Conductive Network

Nonporous Gel Electrolytes Enable Long Cycling at High Current Density for Lithium-Metal Anodes.

In situ constructing lithiophilic and Ion/Electron Dual-Regulated current collector for highly stable lithium metal batteries

Nanocomposite Current Collectors for Anode-Free All-Solid-State Lithium Batteries

(Invited) A Doped Mxene Dual Layer for Reliable Lithium Metal Anode

Powder metallurgical 3D nickel current collectors with plasma-induced Ni 3 N nanocoatings enabling long-life and dendrite-free lithium metal anode

Three-dimensional copper current collector as an anode for rechargeable anode-less lithium-ion batteries

A multifunctional super‐sodiophilic coating on aluminum current collector for high-performance anode-free Na-metal batteries

Nanofiber-based electrode current collector for high-energy Li-S batteries towards practical application for energy storage

Engineering Moderately Lithiophilic Paper-Based Current Collectors with Variable Solid Electrolyte Interface Films for Anode-Free Lithium Batteries

Bacterial Cellulose-Derived Three-Dimensional Carbon Current Collectors for Dendrite-Free Lithium Metal Anodes