Abstract:Mineral dissolution in fractures is largely affected by the flow field within the fracture opening. The flow field maintains transport of the dissolved solutes and influences the concentration gradient and thermodynamic driving force for the mineral dissolution. In this study, we focus on investigating two factors that influence mineral dissolution in fractures: fracture wall roughness and interporosity fluid exchange or the flux through the fracture walls. The classical cubic law for the flow in parallel-plate channels cannot describe the flow in a fracture with rough permeable walls. The wavy, irregular shape of the rough boundaries can result in local flow features and might cause a shift of the overall flow and dissolution regime. At low Reynolds numbers, roughness simply increases the surface area available for mineral dissolution. Moreover, at higher Reynolds numbers, the inertial effects become important and the non-linear flow, flow instabilities, and reverse flow will form. With the creation of eddies and vorticities in the area adjacent to the walls, a flow dead zone forms that reduces the reactive surface area. In the presence of interporosity fluid exchange between the fracture and its surrounding rock, the non-zero fluid velocity on the fracture walls influences the local concentration gradient. In addition, the newly introduced fluid may facilitate or suppress the fracture wall mineral dissolution depending on its composition. This work highlights the compound effect of roughness and fluid flux through the walls on fracture mineral dissolution. For this purpose, the asymptotic solutions of the steady-state Navier–Stokes equations with non-zero velocity on the borders are used to determine the velocity field within the fracture opening. The quadratic and cubic corrections to Darcy’s law are expected as a result of the wall roughness and the flow through the walls. The flow field is coupled with a transport module and a geochemical model (PHREEQC). As a test case, we investigate calcite dissolution in a single fracture at a different influx rate. For each flow rate, a flat fracture and two sets of rough profiles with and without the permeable walls were compared. The simulation results showed that compared to impermeable walls, the pervious walls result in a non-uniform non-periodic mineral dissolution along the fracture, which is more focused at the inlet. At low Reynolds numbers, the hotspots of dissolution are slightly shifted from the smaller cross sectional area to the larger cross sectional area. The effective reaction rate for mineral dissolution of fracture walls increases with an increase in fracture surface roughness. It is shown that at low Reynolds numbers, the permeable fracture walls can improve the effective reaction rate significantly. At relatively larger Reynolds numbers, the impact of flux through the walls on the effective reaction rate is less important, but for some roughness profiles, still not negligible.

Tracer dispersion in two-dimensional rough fractures

Transport in rough self-affine fractures

Miscible transfer of solute in different types of rough fractures: from random to multiscale fracture walls heights

A general transport model for advection-diffusion process through fractures featuring self-affine properties and mismatched phenomena

A New Numerical Method of Considering Local Longitudinal Dispersion in Single Fractures

Evaluation of Hydrodynamic Dispersion Parameters in Fractured Rocks

An explanation of scale‐dependent dispersivity in heterogeneous aquifers using concepts of fractal geometry

D-branes and K-theory in 2D topological field theory

Quantitative Characterization of Solute Transport in Fractures with Different Surface Roughness Based on Ten Barton Profiles

Non-Fickian Solute Transport in Rough-Walled Fractures: the Effect of Contact Area

Modeling the impact of natural roughness of tension joints on heat transport

Anomalous transport in disordered fracture networks: spatial Markov model for dispersion with variable injection modes

Fluid flow characteristics of cross-fractures with two branch fractures of different roughness controlled by fractal dimension: An experimental study

Pore-scale Numerical Investigation of the Impacts of Surface Roughness: Upscaling of Reaction Rates in Rough Fractures

Semi-analytical Models of Mineral Dissolution in Rough Fractures with Permeable Walls

Reexamination of the permeability-aperture relationship for rough fractures with mismatched self-affine surfaces

Effect of Fracture Fill on Seismic Attenuation and Dispersion in Fractured Porous Rocks

Energy-stable discretization of two-phase flows in deformable porous media with frictional contact at matrix-fracture interfaces

Analogue laboratory experiments of preferential flow dynamics in porous fractured media: Importance of fracture intersections and porous matrix imbibition processes

Reduced‐Order Models Unravel the Joint Impact of Aperture Heterogeneity and Shear‐Thinning Rheology on Fracture‐Scale Flow Metrics

Identification of solute transport parameters in fractured granites with heterogeneous apertures