Abstract:In order to achieve the extremely high reliability and availability in superconducting linacs required by some applications such as in accelerator-driven systems (ADS), a fault tolerance design is usually pursued. With the example of the China-ADS main linac, the failure effects of key elements such as RF cavities and focusing elements in different locations along the linac have been studied and the schemes of compensation by means of the local compensation-rematch method have been proposed. For cavity failures, by adjusting the settings of the neighboring cavities and focusing elements one can make sure that the Twiss parameters and beam energy are recovered to the nominal ones at the matching point. For solenoid failures in the low energy section, a novel method by using a neighbor cavity with reverse phase is used to maintain simultaneous acceleration and focusing in both the transverse and longitudinal phase planes. For quadrupole failures in the warm transitions in the high energy section, triplet focusing structure is adopted which can be converted locally into a doublet focusing in case of one quadrupole failure and the rematch method is proven very effective. With macro-particle simulations by TraceWin, it is found that the normalized rms emittance has no obvious growth and the halo emittance has modest growth after applying the local compensation-rematch in the cases mentioned above. In addition, a self-made code based on MATLAB has been developed to double check the simulations by TraceWin for the local compensation and rematch method. (C) 2015 Elsevier B.V. All rights reserved.

Coherent State Path Integrals without Resolutions of Unity

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

A Continuous-Wave Superconducting Linear Accelerator Scheme for the Drive Beam Acceleration of the Compact Linear Collider

Design Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam

Linear Vlasov solver for microbunching gain estimation with inclusion of CSR, LSC and linac geometric impedances

Beam-Based Measurements of Long Range Transverse Wakefields in CLIC Main Linac Accelerating Structure

Adaptive beam loading compensation in room temperature bunching cavities

A Passive Linearizer for Bunch Compression

Study on transient beam loading compensation for China ADS proton linac injector II

Beam-based Measurements of Long-Range Transverse Wakefields in the Compact Linear Collider Main-Linac Accelerating Structure

Beam-based Feedback for the Linac Coherent Light Source

Design and Optimization of Compact Linear Collider Main Linac Accelerating Structure

A Particle-in-cell Mode Beam Dynamics Simulation of Medium Energy Beam Transport for the SSC-Linac

Simulation of a cascaded longitudinal space charge amplifier for broadband radiation production using a superconducting linac

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

Beam-cavity interactions in the rapid cycling synchrotron chain of the future muon collider

Beam-Beam Interaction in a Dielectric Laser Accelerator Electron-Positron Collider

Design Study of Multi-Charge Low Energy Beams Transport for BISOL Post Accelerator

Implications of beam filling patterns on the design of recirculating Energy Recovery Linacs

Local Compensation–rematch for Major Element Failures in Superconducting Linacs with Very High Reliability and Low Beam Loss

Beam loading effects and microwave instability in the booster ring of a high intensity heavy-ion accelerator facility