Abstract:The application of RF cavity beam position monitors (CBPM) is essential for precise beam position measurements in X-ray Free-Electron Lasers (XFEL) and linear colliders. This paper addresses the solution to the inter-bunch signal interference when the bunch separation is as short as nanoseconds. The signals can overlap from bunch to bunch, which can induce appreciable error in evaluating beam position. We propose a conceptual method to eliminate the dominant signal overlap under a quadrature phase offset condition. Using this method, the elimination automatically occurs in the process of signal digitalization. The dominant interference that is contributed by the last bunch can be reduced over an order of magnitude in a conventional CBPM system. In addition, the required bandwidth can be effectively reduced by a factor of 2, and the design challenge for a wideband CBPM is relaxed. The method was demonstrated in an analytic approach by simulating the signal evolution in the RF front end of electronics built in MATLAB code. In the practical concern of applying this method, the factors that perturb the elimination have been examined as well. Based on the numerical result, the CBPM prototype has been designed for the pre-research plan of future high repetition rate hard XFEL at Chinese Academy of Engineering Physics. The combined simulations in CST and MATLAB on the CBPM prototype indicate agreement with the result obtained in the analytic approach.

Beam-Based Measurements of Long Range Transverse Wakefields in CLIC Main Linac Accelerating Structure

Beam-based Measurements of Long-Range Transverse Wakefields in the Compact Linear Collider Main-Linac Accelerating Structure

Beam-induced Wakefield Observation in X -Band Choke-Mode Cavities

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

Single-shot Transverse Wakefield Mapping with a Hollow Electron Beam

Measurement of Transverse Wakefields Induced by a Misaligned Positron Bunch in a Hollow Channel Plasma Accelerator.

Longitudinal Phase Space Manipulation with Planar Corrugated Wakefield Structures

CLIC Wake Field Monitor as a detuned Cavity Beam Position Monitor: Explanation of center offset between TE and TM channels in the TD26 structure

Design of the Compact Linear Collider Main Linac Accelerating Structure Made from Two Halves

Determination of Longitudinal Phase Space in SLAC Main Accelerator Beams

Observation of Skewed Electromagnetic Wakefields in an Asymmetric Structure Driven by Flat Electron Bunches

Planar-dielectric-wakefield accelerator structure using Bragg-reflector boundaries

Single-shot Wakefield Measurement System

Design and Optimization of Compact Linear Collider Main Linac Accelerating Structure

Design of a 3 GHz Accelerator Structure for the CLIC Test Facility (CTF 3) Drive Beam

Bunch Length Measurements Using Coherent Radiation

Measurement of the Decelerating Wake in a Plasma Wakefield Accelerator

Self-mapping the Longitudinal Field Structure of a Nonlinear Plasma Accelerator Cavity

Optimization and Measurement for an Electron Side-Coupled Linac with Longitudinally Off-Axis Coupling Cavities

Tuning of CLIC Accelerating Structure Prototypes at CERN