Abstract:Flow and heat transfer inside an idealized electronics system is simulated using large-eddy simulation (LES)-related approaches that have been validated for simpler canonical flows. These include: Yoshizawa LES, detached eddy simulation (DES), limited numerical scales (LNS) and other hybrid LES-RANS (Reynolds-averaged Navier-Stokes) approaches including a new ILES (implicit LES)RANS method. For the ILES, dissipation from the one legged temporal discretization is used to drain turbulence. The use of differential equations, including the Hamilton-Jacobi and Eikonal, to model turbulence distance functions is explored. The Hamilton-Jacobi is shown to be especially compatible with the zonal RANS-ILES approach and the Eikonal with DES. Performances of the LES-related methods are compared with explicit algebraic stress unsteady RANS (URANS) results and also measurements. Considering the problem complexity, generally, for all methods, predicted mean velocities and turbulence intensities are in a reasonable agreement with measurements. Average errors are 15 and 25%, respectively. With the exception of the zonal ILES-RANS method, turbulence intensities are under-predicted. For heat transfer, none of the models performs well giving circa 100% errors. Notably, the LNS performs poorly for both the flow field and heat transfer giving a highly complex RANS-LES interface with inappropriate upstream LES boundary conditions. DES is found impossible to converge. This is partly attributed to the irregular LES-RANS interface arising with the method. All the LES approaches significantly underpredict heat transfer and the URANS over-predicts. Even the increased flow activity arising from use of the less dissipative ILES element does not prevent the significant heat transfer under-prediction. Copyright (c) 2005 John Wiley & Sons, Ltd.

Numerical simulations of unsteady complex geometry flows

Analysis on Numerical Stability and Convergence of Reynolds Averaged Navier-Stokes Simulations from the Perspective of Coupling Modes

Computing Mean Fields with Known Reynolds Stresses at Steady State

A Computational Strategy for Nonlinear Coupled Constitutive Relations of Rarefied Nonequilibrium Flows on Unstructured Grids

Numerical Simulation of Hypersonic Reaction Flows with Nonlinear Coupled Constitutive Relations

Numerical Analysis of the Micro-Couette Flow Using a Non-Newton–fourier Model with Enhanced Wall Boundary Conditions

Computation of an unsteady complex geometry flow using novel non‐linear turbulence models

Simulation of Flow and Heat Transfer in Micro Couette Flow

Numerical Simulation of Low Reynolds Number Flows Based on CFD

Contrasting a Novel Temporally Orientated Hamilton–Jacobi‐equation‐based ILES Method with Other Approaches for a Complex Geometry Flow

Turbulent Flow Simulation Using Les with Dynamical Mixed One-Equation Subgrid Models in Complex Geometries

Numerical investigation of flows around an axisymmetric body of revolution by using Reynolds-stress model based hybrid Reynolds-averaged Navier–Stokes/large eddy simulation

Numerical simulation of a low Prandtl number flow with a four-parameters turbulence model through an explicit algebraic definition of Reynolds stress and turbulent heat flux

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Contrasting CFD for electronic systems modeling with that for aerospace

Finite Element Analysis of Turbulent Flows Using Les and Dynamic Subgrid-Scale Models in Complex Geometries

Research on Numerical Simulation of a Sort of Typical Flow System

Numerical Simulation of Flow Around Square Cylinder Using Different Low-Reynolds Number Turbulence Models

Numerical Simulations of Highly Nonlinear Steady and Unsteady Free Surface Flows

Numerical simulation of turbulent flow features around a surface mounted cube

Application of the Reynolds Stress Model to the Calculation of Three-Dimensional Turbulent Flow-Field