Abstract:Regarding the challenge in practical varifocal AR‐HUDs, this study proposes an Alvarez lens‐based solution. Two focal planes are generated with one display panel and a freeform mirror. One focal plane is fixed at 7.5 m. The other can be tuned by sliding the Alvarez lenses in‐plane to generate VIDs continuously varying from 2.5 to 7.5 m. A crucial requirement of augmented reality head‐up displays (AR‐HUDs) is continuously adjustable virtual image distance (VID), which allows adaptation to various depths in road environments and thereby avoids visual fatigue. However, usual varifocal components for near‐eye displays are unavailable because AR‐HUDs require the varifocal component's aperture to be larger than 10 cm. This study considers the Alvarez lenses, which change the optical power by in‐plane sliding two freeform lenses. Under the paraxial assumption, classic Alvarez lenses can create a quadratic wavefront profile, but the large aperture and extensive diopter variation range required by AR‐HUDs lead to significant aberrations. Thus, the classic paraxial Alvarez lens design is extended by co‐optimizing Alvarez lenses with high‐order surface profiles and a primary freeform mirror. Therefore, a novel varifocal AR‐HUD containing Alvarez lenses with apertures larger than 15 cm is proposed. The AR‐HUD generates a varifocal plane whose VID can be continuously adjusted between 2.5 and 7.5 m, and another focal plane with a fixed VID at 7.5 m. In addition, merely one display panel is used for compactness. Finally, an AR‐HUD prototype with a reduced volume of 9.8 L was built. The expected varifocal performance and qualified imaging quality were experimentally verified through the field of view, VID, and image sharpness.

Varifocal lens based on fifth-order XY polynomial freeform surface

Design of a Compact Varifocal Panoramic System Based on the Mechanical Zoom Method.

Design of Vari-Focal Panoramic Annular Lenses Based on Alvarez Surfaces

An Optical Zoom System Based on Tunable Lens with Polymer Membrane and Multilayered Structure

Zoom Optical System Using Tunable Polymer Lens

Design of an optimized Alvarez lens based on the fifth-order polynomial combination

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Design of a freeform varifocal panoramic optical system with specified annular center of field of view.

Symmetrical Optical Imaging System with Bionic Variable-Focus Lens for Off-Axis Aberration Correction

Wavelength-Dependent Varifocal Flat Lens

Zoom Liquid Lens Employing a Multifocal Fresnel Zone Plate.

Varifocal Liquid Lens Driven by a Conical Dielectric Elastomer Actuator.

Design of a Compact Infrared Continuous Optical Zoom System Based on Alvarez Lenses

Ultra-wide Varifocal Imaging with Selectable Region of Interest Capacity Using Alvarez Lenses Actuated by a Dielectric Elastomer

Four-group Stabilized Zoom Lens Design of Two Focal-Length-variable Elements.

50X five-group inner-focus zoom lens design with focus tunable lens using Gaussian brackets and lens modules.

Zoom Lens Design Using Liquid Lenses for Achromatic and Spherical Aberration Corrected Target

Design of a small non-displacement zoom optical system based on Gaussian brackets and traversal ideation

A varifocal augmented reality head‐up display using Alvarez freeform lenses

Varifocal diffractive lens based on microfluidics

10× Continuous Optical Zoom Imaging Using Alvarez Lenses Actuated by Dielectric Elastomers.