Synthesis of disulfide surrogate peptides incorporating ethylene glycol bridge

Xiao Wei,Jibin Cui,Rui Zhao,Jie Luo,Yiming Li,Donald Bierer,Jing Shi

DOI: https://doi.org/10.1039/d2nj05290c

IF: 3.3

2023-01-01

New Journal of Chemistry

Abstract:The replacement of disulfide bonds with metabolically stable isosteres by a diaminodiacid strategy has been demonstrated as an effective and flexible method to improve the stability of disulfide-rich peptides. In...

What problem does this paper attempt to address?

Synthesis of Disulfide Surrogate Peptides Incorporating an Ethylene Glycol Bridge

Xiao-Xiong Wei,Ji-Bin Cui,Rui Zhao,Jie Luo,Yi-Ming Li,Donald Bierer,Jing Shi

DOI: https://doi.org/10.1039/d2nj05290c

IF: 3.3

2023-01-01

New Journal of Chemistry

Abstract:We report a new diaminodiacid containing an ethylene glycol bridge for the synthesis of disulfide surrogate peptides.
Chemical Synthesis and Biological Activity of Peptides Incorporating an Ether Bridge As a Surrogate for a Disulfide Bond.

Rui Zhao,Pan Shi,Junyou Chen,Shuaishuai Sun,Jingnan Chen,Jibin Cui,Fangming Wu,Gemin Fang,Changlin Tian,Jing Shi,Donald Bierer,Lei Liu,Yi-Ming Li

DOI: https://doi.org/10.1039/d0sc02374d

IF: 8.4

2020-01-01

Chemical Science

Abstract:Disulfide bridges contribute to the definition and rigidity of polypeptides, but they are inherently unstable in reducing environments and in the presence of isomerases and nucleophiles. Strategies to address these deficiencies, ideally without significantly perturbing the structure of the polypeptide, would be of great interest. One possible surrogate for the disulfide bridge is a simple thioether, but these are susceptible to oxidation. We report the introduction of an ether linkage into the biologically active, disulfide-rich peptides oxytocin, tachyplesin I, and conotoxin α-ImI, using an ether-containing diaminodiacid as the key building block, obtained by the stereoselective ring-opening addition reaction of an aziridine skeleton with a hydroxy group. NMR studies indicated that the derivatives with an ether surrogate bridge exhibited very small change of their three-dimensional structures. The analogs obtained using this novel substitution strategy were found to be more stable than the original peptide in oxidative and reductive conditions; without a loss of bioactivity. This strategy is therefore proposed as a practical and versatile solution to the stability problems associated with cysteine-rich peptides.
Synthesis of Disulfide Surrogate Peptides Incorporating Large‐Span Surrogate Bridges Through a Native‐Chemical‐Ligation‐Assisted Diaminodiacid Strategy

Qian Qu,Shuai Gao,Fangming Wu,Meng-Ge Zhang,Ying Li,Long-Hua Zhang,Donald Bierer,Chang-Lin Tian,Ji-Shen Zheng,Lei Liu

DOI: https://doi.org/10.1002/anie.201915358

2020-01-01

Angewandte Chemie

Abstract:AbstractThe use of synthetic bridges as surrogates for disulfide bonds has emerged as a practical strategy to obviate the poor stability of some disulfide‐containing peptides. However, peptides incorporating large‐span synthetic bridges are still beyond the reach of existing methods. Herein, we report a native chemical ligation (NCL)‐assisted diaminodiacid (DADA) strategy that enables the robust generation of disulfide surrogate peptides incorporating surrogate bridges up to 50 amino acids in length. This strategy provides access to some highly desirable but otherwise impossible‐to‐obtain disulfide surrogates of bioactive peptide. The bioactivities and structures of the synthetic disulfide surrogates were verified by voltage clamp assays, NMR, and X‐ray crystallography; and stability studies established that the disulfide replacements effectively overcame the problems of disulfide reduction and scrambling that often plague these pharmacologically important peptides.
Synthesis of Disulfide Surrogate Peptides through a Serine/Threonine Ligation-Assisted Diaminodiacid Strategy

Jia-Hui Tang,Ru-Jing Yuan,Jie Luo,Ning Wang,Jun Wang,Yi-Ming Li

DOI: https://doi.org/10.1021/acs.orglett.3c01078

IF: 5.2

2023-04-21

Organic Letters

Abstract:We report a new serine/threonine ligation (STL)-assisted diaminodiacid (DADA) strategy for the flexible construction of disulfide surrogates by the option of more abundant -Aa-Ser/Thr- ligation sites. The practicality of this strategy was evidenced by the synthesis of the intrachain disulfide surrogate of C-type natriuretic peptide and the interchain disulfide surrogate of insulin.

chemistry, organic
Chemical Synthesis of Disulfide Surrogate Peptides by Using Beta-Carbon Dimethyl Modified Diaminodiacids

Ji-Bin Cui,Xiao-Xiong Wei,Rui Zhao,Huixia Zhu,Jing Shi,Donald Bierer,Yi-Ming Li

DOI: https://doi.org/10.1039/d1ob01715b

2021-01-01

Organic & Biomolecular Chemistry

Abstract:We report the first example of thioether bridged diaminodiacids incorporating Cys Cβ dimethyl modification.
A Diaminodiacid (DADA) Strategy for the Development of Disulfide Surrogate Peptides

Yun-Kun Qi,Qian Qu,Donald Bierer,Lei Liu

DOI: https://doi.org/10.1002/asia.202000609

2020-01-01

Chemistry - An Asian Journal

Abstract:Disulfide bond-containing peptides are useful molecular scaffolds with diagnostic and therapeutic applications due to their good biological activity and good target selectivity, but their utility is sometimes limited by the lability of the disulfide moiety under reducing conditions and in the presence of disulfide bond isomerase. The development of disulfide surrogates with improved redox stability has been an area of ongoing research; and one possible strategy is based on a diaminodiacid (DADA) moiety, which can be used to synthesize the disulfide bond replacement peptides with precise structures and enhanced stability through automated solid-phase peptide synthesis (SPPS). This review summarizes recent developments in the DADA-based SPPS of peptide disulfide surrogates. Some representative applications and structural studies on the DADA-based disulfide surrogates are described.
Diaminodiacid Bridges to Improve Folding and Tune the Bioactivity of Disulfide-Rich Peptides

Guo Ye,Sun De-Meng,Wang Feng-Liang,He Yao,Liu Lei,Tian Chang-Lin

DOI: https://doi.org/10.1002/anie.201500699

2015-01-01

Angewandte Chemie

Abstract:Disulfide-rich peptides containing three or more disulfide bonds are promising therapeutic and diagnostic agents, but their preparation is often limited by the tedious and low-yielding folding process. We found that a single cystine-to-diaminodiacid replacement could significantly increase the folding efficiency of disulfide-rich peptides and thus improve their production yields. The practicality of this strategy was demonstrated by the synthesis and folding of derivatives of the mu-conotoxin SIIIA, the preclinical hormone hepcidin, and the trypsin inhibitor EETI-II. NMR and X-ray crystallography studies confirmed that these derivatives of disulfide-rich peptide retained the correct three-dimensional conformations. Moreover, the cystine-to-diaminodiacid replacement enabled structural tuning, thereby leading to an EETI-II derivative with higher bioactivity than the native peptide.
One-pot synthesis of cysteine-rich peptide via '2,2'-dithiobispyridine' mediated sulfur exchange reaction

Honglin Ge,Qingliang Xu,Lixia Pan,Haozhi Sun,Sihan Li,Rilei Yu,Xin Shen,Feng Su

DOI: https://doi.org/10.1016/j.tetlet.2024.155057

IF: 2.032

2024-04-14

Tetrahedron Letters

Abstract:The cyclization of polypeptides confers enhanced stability, specificity, binding affinity, and cell permeability, making it a common feature in the backbone structure of natural products. Disulfide bonds are widely found in active peptides and play a crucial role in maintaining their secondary structure. In this study, we present a sulfur exchange reaction-based method for constructing disulfide bonds using 2,2′-dithiobis(5-nitropyridine) as a mediator. This method exhibits excellent substrate adaptability and compatibility with conventional functional groups. It also demonstrates rapid reaction efficiency, allowing successful disulfide bond formation under various pH conditions. Moreover, the products and additives can be easily separated, showing the potential of this method for screening disulfide bond-rich peptides in future research.

chemistry, organic
Synthesis of Peptide Disulfide-Bond Mimics by Using Fully Orthogonally Protected Diaminodiacids

Tao Wang,Jian Fan,Xiao-Xu Chen,Rui Zhao,Yang Xu,Donald Bierer,Lei Liu,Yi-Ming Li,Jing Shi,Ge-Min Fang

DOI: https://doi.org/10.1021/acs.orglett.8b02459

IF: 5.2

2018-01-01

Organic Letters

Abstract:A new strategy was developed for the synthesis of peptide disulfide-bond mimics using fully orthogonally protected diaminodiacids. This method overcomes the previous problems of heavy-metal contamination and poor compatibility with Fmoc chemistry and provides a practical avenue for the efficient preparation of peptide disulfide-bond mimics.
Diaminodiacid-based solid-phase synthesis of peptide disulfide bond mimics.

Hong-Kui Cui,Ye Guo,Yao He,Feng-Liang Wang,Hao-Nan Chang,Yu-Jia Wang,Fang-Ming Wu,Chang-Lin Tian,Lei Liu

DOI: https://doi.org/10.1002/anie.201302197

2013-01-01

Abstract:The antimicrobial peptide tachyplesin I was used as a model to apply the title strategy, which was developed for the preparation of peptidic macrocycles with double disulfide surrogates. The folding and activity of the tachyplesin I analogues were found to be sensitive to the structure of the disulfide surrogates, thus underlining the necessity of a flexible synthetic route for generating disulfide bond surrogates with high structural diversity. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Artificial disulfide-rich peptide scaffolds with precisely defined disulfide patterns and a minimized number of isomers.

Yiwu Zheng,Zhuoru Li,Jing Ren,Weidong Liu,Yaqi Wu,Yibing Zhao,Chuanliu Wu

DOI: https://doi.org/10.1039/c6sc05710a

IF: 8.4

2017-01-01

Chemical Science

Abstract:Disulfide-rich peptides are emerging as potential templates for drug design applications. However, the synthesis and reengineering of disulfide-rich peptides are challenging, owing to the complexity of the oxidative folding process involving a number of diverse isomeric structures. Novel disulfide-rich peptide scaffolds that are not besieged by their disulfide isomers are still greatly desired. In this work, we report the design and synthesis of a novel class of artificial disulfide-rich peptide scaffolds with precisely defined disulfide patterns and a minimized number of isomers. In theory, natural peptides with three disulfide bonds have 15 possible isomers. By rationally engineering the thiol-framework of a peptide containing six cysteines with penicillamines and a dithiol amino acid, we demonstrated, for the first time, that the total number of isomers formed after oxidative folding can be decreased to a minimum of two (i.e., from 15 to 2). As fewer isomeric folds are involved in the oxidative folding, the pathway of the folding becomes more concise and the yield of the artificial scaffolds is substantially increased compared to that of its six-cysteine-containing analogue, which makes the artificial disulfide-rich scaffolds (with only 2 predefined isomeric folds) extremely promising for being exploited as structurally complex templates for the design of peptide therapeutics and ligands.
In Situ Maleimide Bridging of Disulfides and a New Approach to Protein PEGylation

Felix F. Schumacher,Muriel Nobles,Chris P. Ryan,Mark E. B. Smith,Andrew Tinker,Stephen Caddick,James R. Baker

DOI: https://doi.org/10.1021/bc1004685

IF: 4.7

2011-01-27

Bioconjugate Chemistry

Abstract:The introduction of non-natural entities into proteins by chemical modification has numerous applications in fundamental biological science and for the development and manipulation of peptide and protein therapeutics. The reduction of native disulfide bonds provides a convenient method to access two nucleophilic cysteine residues that can serve as ideal attachment points for such chemical modification. The optimum bioconjugation strategy utilizing these cysteine residues should include the reconstruction of a bridge to mimic the role of the disulfide bond, maintaining structure and stability of the protein. Furthermore, the bridging chemical modification should be as rapid as possible to prevent problems associated with protein unfolding, aggregation, or disulfide scrambling. This study reports on an in situ disulfide reduction-bridging strategy that ensures rapid sequestration of the free cysteine residues in a bridge, using dithiomaleimides. This approach is then used to PEGylate the peptide hormone somatostatin and retention of biological activity is demonstrated.

chemistry, multidisciplinary,biochemistry & molecular biology, organic,biochemical research methods
- rich peptide sca ff olds with precisely de fi ned disul fi de patterns and a minimized number of isomers †

Yiwu Zheng,Zhuoru Li,Jing Ren,Weidong Liu,Yaqi Wu,Yibing Zhao,Chuanliu Wu

2017-01-01

Abstract:Disulfide-rich peptides are emerging as potential templates for drug design applications. However, the synthesis and reengineering of disulfide-rich peptides are challenging, owing to the complexity of the oxidative folding process involving a number of diverse isomeric structures. Novel disulfide-rich peptide scaffolds that are not besieged by their disulfide isomers are still greatly desired. In this work, we report the design and synthesis of a novel class of artificial disulfide-rich peptide scaffolds with precisely defined disulfide patterns and a minimized number of isomers. In theory, natural peptides with three disulfide bonds have 15 possible isomers. By rationally engineering the thiol-framework of a peptide containing six cysteines with penicillamines and a dithiol amino acid, we demonstrated, for the first time, that the total number of isomers formed after oxidative folding can be decreased to a minimum of two (i.e., from 15 to 2). As fewer isomeric folds are involved in the oxidative folding, the pathway of the folding becomes more concise and the yield of the artificial scaffolds is substantially increased compared to that of its six-cysteine-containing analogue, which makes the artificial disulfide-rich scaffolds (with only 2 predefined isomeric folds) extremely promising for being exploited as structurally complex templates for the design of peptide therapeutics and ligands.
Chemical Synthesis of Six‐Atom Thioether Bridged Diaminodiacid for Solid‐Phase Synthesis of Peptide Disulfide Bond Mimics

Junyou Chen,Shuaishuai Sun,Rui Zhao,Chen-Peng Xi,Wenjie Qiu,Ning Wang,Ya Wang,Donald Bierer,Jing Shi,Yi-Ming Li

DOI: https://doi.org/10.1002/slct.201904042

2020-01-01

ChemistrySelect

Abstract:Solid phase peptide synthesis (SPPS) strategy based on diaminodiacids had become an effective method for the synthesis of disulfide-containing polypeptides. At present, it remains necessary to develop a diaminodiacid with more abundant chain structures to study the structure-activity relationship. In this work, we developed a new type of diaminodiacids containing a six-atom thioether (C-C-S-C-C-C, C-C-C-S-C-C) bridge. The key segment protected homo-homocystine can be efficiently obtained by converting a side chain carboxyl group into a thiol group, which contribute to the facile and efficient synthesis of new diaminodiacid. With this diaminodiacid in hand, we successfully obtained tachyplesin containing new disulfide bond mimic by solid phase peptide synthesis. The tachyplesin analog not only has similar activity as natural counterpart, but also exhibits increased stability under reducing conditions.
Unexpected diselenide metathesis in selenocysteine-substituted biologically active peptides

Ying He,Toshiki Takei,Luis Moroder,Hironobu Hojo

DOI: https://doi.org/10.1039/d4ob00921e

2024-07-31

Abstract:Substitution of disulfide bonds with a diselenide bonds in peptides and proteins is an often-used strategy to increase the stability of naturally occurring peptides and proteins. In this paper, diselenide metathesis between model diselenide dimer peptides, as well as that in diselenide(s)-substituted biologically active peptides, were analyzed. Surprisingly, depending on the tertiary structure of the peptides, we observed that the metathesis reaction occurs under physiological conditions even in the absence of reducing agents, light and heating.
Silver-promoted solid-phase guanidyl-formation triggered peptide stapling and cyclization: A robust platform for improving multiple properties of bioactive peptides

Hong-Gang Hu,Xiang Li,Nan Wang,Baobao Chen

DOI: https://doi.org/10.26434/chemrxiv-2024-gwdlq

2024-10-24

Abstract:Stapled or cyclic peptides offered advantageous membrane permeability and proteolytic stability to linear counterparts. We herein synthesized a series of S-alkyl-isothiourea building blocks, which could be conveniently coupled with one or two amine groups in both i,i+4 and i,i+7 space located within the peptides, enabling the silver-promoted solid-phase guanidyl-formation (SSG) peptide stapling. The guanidyl stapled peptides, characterized with highly hydrophilic and cationic properties, could be readily labelled by biotin, polyethylene glycol and fluorescent motif using the pre-made functionalized bis-S-alkyl-isothiourea. SSG reactions could be rendered for generating double-stapled peptide, and notably, tri-guanidyl bicyclic peptide with the aid of tri-S-alkyl-isothiourea donor. When compared with hydrocarbon stapled and/or linear peptide, SSG stapled peptides exhibited enhanced proteolytic tolerance, remarkable hydrophilicity, membrane penetration and thus higher in vitro biological activities. Our developed SSG peptide stapling and cyclization strategy served as a meaningful tool in modifying other peptide fragments and offering the potent peptide therapeutic candidates.

Chemistry
The Disulfide Bond-Mediated Cyclization of Oral Peptides

Chenguang Yao,Guoguo Ye,Qing Yang,Zhenwang Chen,Minghui Yang

DOI: https://doi.org/10.2174/0113892037280719231214095428

2024-01-25

Abstract:Abstract: ‘Structure determines function’ is a consensus in the current biological community, but the structural characteristics corresponding to a certain function have always been a hot field of scientific exploration. A peptide is a bio-active molecule that is between the size of an antibody and a small molecule. Still, the gastrointestinal barrier and the physicochemical properties of peptides have always limited the oral administration of peptides. Therefore, we analyze the main ways oral peptide conversion strategies of peptide modification and permeation enhancers. Based on our analysis of the structure of natural oral peptides, which can be absorbed through the gastrointestinal tract, we believe that the design strategy of natural stapled peptides based on disulfide bonds is good for oral peptide design. This cannot only be used to identify anti-gastrointestinal digestive structural proteins in nature but also provide a solid structural foundation for the construction of new oral peptide drugs.

biochemistry & molecular biology
Dmab/ivDde Protected Diaminodiacids for Solid-Phase Synthesis of Peptide Disulfide-Bond Mimics

Yang Xu,Tao Wang,Chao-Jian Guan,Yi-Ming Li,Lei Liu,Jing Shi,Donald Bierer

DOI: https://doi.org/10.1016/j.tetlet.2017.03.024

IF: 2.032

2017-01-01

Tetrahedron Letters

Abstract:The use of pre-prepared diaminodiacids has been established as an effective approach for the chemical synthesis of peptide disulfide bond mimics. A technical problem often encountered in the implementation of the diaminodiacids strategy is the use of heavy metal reagents to remove the side-chain protecting groups. In the present work, we reported the development of diaminodiacid that carry 4-(N-[1-(4,4dimethy1-2,6-dioxocyclo-hexylidene)-3-methylbutyl]amino)benzyl (Dmab) and 1-(4,4-dimethyl-2,6dioxocyclohex-1-ylidene)-3-methylbutyl (ivDde) protecting groups. This pair of protecting groups can be readily removed by mild hydrazinolysis during the solid-phase synthesis on resin. We demonstrated the use of Dmab/ivDde protected diaminodiacids in the successful synthesis of a disulfide surrogate of oxytocin. (C) 2017 Published by Elsevier Ltd.
Prior disulfide bond-mediated Ser/Thr ligation

Heng Liu,Hoi Yee Chow,Jiamei Liu,Pengfei Shi,Xuechen Li

DOI: https://doi.org/10.1039/d4sc04825c

IF: 8.4

2024-08-19

Chemical Science

Abstract:In this work, we developed a novel strategy, prior disulfide bond-mediated Ser/Thr ligation (PD-STL), for the chemical synthesis of peptides and proteins. This approach combines disulfide bond-forming chemistry with Ser/Thr ligation (STL), converting intermolecular STL into intramolecular STL to effectively proceed regardless of concentrations. We demonstrated the effectiveness of PD-STL under high dilution conditions, even for the relatively inert C-terminal proline at the ligation site. Additionally, we applied this method to synthesize the N-terminal cytoplasmic domain (2-104) of caveolin-1 and its Tyr14 phosphorylated form.

chemistry, multidisciplinary
Cytosolic expression, solution structures, and molecular dynamics simulation of genetically encodable disulfide‐rich de novo designed peptides

Garry W. Buchko,Surya V.S.R.K. Pulavarti,Victor Ovchinnikov,Elizabeth A. Shaw,Stephen A. Rettie,Peter J. Myler,Martin Karplus,Thomas Szyperski,David Baker,Christopher D. Bahl

DOI: https://doi.org/10.1002/pro.3453

IF: 8

2018-09-01

Protein Science

Abstract:Disulfide-rich peptides represent an important protein family with broad pharmacological potential. Recent advances in computational methods have made it possible to design new peptides which adopt a stable conformation de novo. Here, we describe a system to produce disulfide-rich de novo peptides using Escherichia coli as the expression host. The advantage of this system is that it enables production of uniformly <sup>13</sup> C- and <sup>15</sup> N-labeled peptides for solution nuclear magnetic resonance (NMR) studies. This expression system was used to isotopically label two previously reported de novo designed peptides, and to determine their solution structures using NMR. The ensemble of NMR structures calculated for both peptides agreed well with the design models, further confirming the accuracy of the design protocol. Collection of NMR data on the peptides under reducing conditions revealed a dependency on disulfide bonds to maintain stability. Furthermore, we performed long-time molecular dynamics (MD) simulations with tempering to assess the stability of two families of de novo designed peptides. Initial designs which exhibited a stable structure during simulations were more likely to adopt a stable structure in vitro, but attempts to utilize this method to redesign unstable peptides to fold into a stable state were unsuccessful. Further work is therefore needed to assess the utility of MD simulation techniques for de novo protein design.

biochemistry & molecular biology

Synthesis of disulfide surrogate peptides incorporating ethylene glycol bridge

Synthesis of Disulfide Surrogate Peptides Incorporating an Ethylene Glycol Bridge

Chemical Synthesis and Biological Activity of Peptides Incorporating an Ether Bridge As a Surrogate for a Disulfide Bond.

Synthesis of Disulfide Surrogate Peptides Incorporating Large‐Span Surrogate Bridges Through a Native‐Chemical‐Ligation‐Assisted Diaminodiacid Strategy

Synthesis of Disulfide Surrogate Peptides through a Serine/Threonine Ligation-Assisted Diaminodiacid Strategy

Chemical Synthesis of Disulfide Surrogate Peptides by Using Beta-Carbon Dimethyl Modified Diaminodiacids

A Diaminodiacid (DADA) Strategy for the Development of Disulfide Surrogate Peptides

Diaminodiacid Bridges to Improve Folding and Tune the Bioactivity of Disulfide-Rich Peptides

One-pot synthesis of cysteine-rich peptide via '2,2'-dithiobispyridine' mediated sulfur exchange reaction

Synthesis of Peptide Disulfide-Bond Mimics by Using Fully Orthogonally Protected Diaminodiacids

Diaminodiacid-based solid-phase synthesis of peptide disulfide bond mimics.

Artificial disulfide-rich peptide scaffolds with precisely defined disulfide patterns and a minimized number of isomers.

In Situ Maleimide Bridging of Disulfides and a New Approach to Protein PEGylation

- rich peptide sca ff olds with precisely de fi ned disul fi de patterns and a minimized number of isomers †

Chemical Synthesis of Six‐Atom Thioether Bridged Diaminodiacid for Solid‐Phase Synthesis of Peptide Disulfide Bond Mimics

Unexpected diselenide metathesis in selenocysteine-substituted biologically active peptides

Silver-promoted solid-phase guanidyl-formation triggered peptide stapling and cyclization: A robust platform for improving multiple properties of bioactive peptides

The Disulfide Bond-Mediated Cyclization of Oral Peptides

Dmab/ivDde Protected Diaminodiacids for Solid-Phase Synthesis of Peptide Disulfide-Bond Mimics

Prior disulfide bond-mediated Ser/Thr ligation

Cytosolic expression, solution structures, and molecular dynamics simulation of genetically encodable disulfide‐rich de novo designed peptides