Abstract:International Journal of Applied Mechanics, Ahead of Print. An analysis of the dynamic response and damage assessment of partially confined metallic cylinders under transverse air-blast loading is presented in this paper. The examination of the blast shock wave load distribution and the consequences of standoff distances on the plastic deformation of cylinders was conducted with meticulous attention in the experimental testing. The charges of TNT were determined to have masses of 16.3[math]kg and 29.5[math]kg, while the distances at which they were placed from the target varied between 1.5[math]m and 4.25[math]m. Three unique deformation modes were found to exist in the unilaterally supported cylinder, all of which were directly connected to the distribution of the blast load. In order to obtain an improved understanding of the dynamic behaviors exhibited in cylinders, a finite element simulation model was utilized and subsequently validated using an examination of the experimental results. The assessment of shock wave damage was conducted by utilizing the residual deformation of the metallic cylinder as an equivalent characterization under lateral blast shock wave loading. The duration of the positive pressure zone of the shock wave was determined to be between one-fourth and ten times the vibration period of a unilaterally supported cylinder, indicating that the P-I (overpressure-impulse) criterion could be utilized for damage evaluation. The incorporation of the P-I criterion was subsequently employed to evaluate the detrimental consequences, taking into consideration the radial distribution of residual deformation identified in metal cylindrical shell constructions subjected to lateral blast shock wave loading. This research contributed to a better comprehension of the dynamic behavior of partially confined metallic cylinders subjected to lateral blast loading and highlights the significance of the P-I criterion for evaluating and mitigating the damage effects in such scenarios.

Damage Mode Analysis of Steel Box Structures Subjected to Internal Blast Loading

Damage evaluation and prediction of steel box structures under internal blast

Dynamic Response and Vibration Modes of Multi-Layer Wound Cylindrical Shell for Hydrogen Storage under External Blast Loading

Anisotropic Dynamic Damage and Fragmentation of Rock Materials under Explosive Loading

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Research of Loading Effects of Blast in Air

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

DAMAGE ACCUMULATION, FRACTURE AND POST FRACTURE ANALYSES FOR INITIALLY FLAWED STEEL STRUCTURES

Numerical Simulation of Internal Explosion and Dynamic Response Analysis for Vertical Cylindrical Steel Tanks

Study on critical condition of damage mode of local grillage structure under near-field underwater explosion

Damage modes and mechanism of steel box arch ribs under contact explosion

Computer Simulation of Dynamic Brittle Damage Process in Arch Dam Due to Blast Load

Numerical simulation on steel box damage under internal explosion by smoothed particle hydrodynamics

Influence of Explosive Shape on the Response of Steel Plates under Blast Loading

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Dynamic Response Mechanism of Thin-Walled Plate under Confined and Unconfined Blast Loads

Dynamic Response and Damage Assessment of Partially Confined Metallic Cylinders Under Transverse Blast Loading

Dynamic Response Parameter Analysis of Steel Frame Joints under Blast Loading

Ductile and Brittle Failure Assessment of Containment Vessels Subjected to Internal Blast Loading

Experimental Investigation on the Deformation and Damage of Steel Ribbon Wound Vessel for Hydrogen Storage under External Impact and Blast Loading

Dynamic Structural Assessment of Blast Wall Designs on Military-Based Vehicle Using Explicit Finite Element Approach