Abstract:This paper studies the distribution characteristics of the current in situ stress field in northeast Yunnan Province by using multisource stress data, including in situ stress measurements, focal mechanism solutions, and borehole damage information, and comprehensively determines the in situ stress magnitude and direction in the mining area. Based on the borehole ultrasonic imaging test results, a new method using borehole breakouts and drilling‐induced fractures was proposed to determine the stress direction, and a statistical analysis was conducted on the dip direction, dip angle, and line density of structural planes. Through rock mechanics experiments, the evolution of rock mechanical properties with depth was studied, and the influences of rock mass structure and rock mechanical properties on in situ stress were explored. The Maoping lead–zinc mining area is a significant metal mine site in northeastern Yunnan. In this study, both hydraulic fracturing in situ stress testing and ultrasonic imaging logging were first carried out in the mining area. Second, 930 focal mechanism solutions and 231 sets of stress data near the mining area were collected. Then, the variations in the type of in situ stress field, the magnitude of in situ stress, the direction of horizontal principal stress, and the ratio of lateral pressure were analyzed to characterize the distribution of the in situ stress field. On this basis, a new method using borehole breakouts and drilling‐induced fractures was proposed to determine the stress direction. Finally, the evolution of the mechanical properties of dolomite with burial depth was analyzed and the influence of rock mechanical properties on the distributions of the in situ stress field was explored. The results show that the in situ stress in the mining area is σH > σV > σh, indicating a strike–slip stress state. The in situ stress is high in magnitude, and its value increases with burial depth. The maximum and minimum horizontal lateral stress coefficients are stabilized at approximately 1.22 and 0.73, respectively. The direction of the maximum horizontal principal stress is NW, mainly ranging from N58.44° W to N59.70° W. The stress field inferred from the focal mechanism solution is in good agreement with the test results. The proportion of structural planes with dip angles between 30° and 75° exceeds 80%, and the dip direction of the structural planes is mainly NW to NWW. The line density of structural planes shows high density in shallow areas and low density in deep areas. More energy tends to be accumulated in rocks with higher elastic modulus and strength, leading to higher in situ stress levels. These findings are of significant reference for mine tunnel layout, support design optimization, and disaster prevention.

In situ stress field prediction based on seismic data in Sijiazhuang mining area

Research On In-Situ Stress Field Simulation Of Coal And Gas Outburst Mining Area With 3d Finite Element Method

Using 3D finite element method to simulate in-situ stress field and its distribution characteristics in Tianfu Sanhui NO.1 mine

Study on In Situ Stress Distribution Law of the Deep Mine: Taking Linyi Mining Area as an Example

STUDY OF DISTRIBUTION CHARACTERISTICS OF IN-SITU STRESSES FOR HUOZHOU MINING AREA

Determination of mining-induced stress based on mining face hydraulic support stress and micro-seismicity

Integrating well-logs, 3D seismic, and earthquake data for the comprehensive prediction of 3D in-situ stress orientations: A case study from the Weiyuan area in the Sichuan Basin, China.

Current stress field and its relationship to tectonism in a coal mining district, central China, for underground coal energy exploration

Deep Coal Seam In-Situ Stress Evaluation Through the Integration of Sonic Logging and Micro-Indentation Methods

Research and application on simulation of oilfield 3D in-situ stress field by multi-information co-processing

Study on Temporal and Spatial Characteristics of Overlying Strata in the Deep Coal Mining Process

In situ Stress–Coal Structure Relationship and Its Influence on Hydraulic Fracturing: A Case Study in Zhengzhuang Area in Qinshui Basin, China

3D In-Situ Stress Prediction for Shale Reservoirs Based on the CapsNet-BiLSTM Hybrid Model

Paleotectonic Stress and Present Geostress Fields and Their Implications for Coalbed Methane Exploitation: A Case Study from Dahebian Block, Liupanshui Coalfield, Guizhou, China

Numerical back analysis method of three-dimensional in situ stress fields considering complex surface topography and variable collinearity

Mining stress formation and distribution: Predictive model based on overburden key strata structure

Simulation of Paleotectonic Stress Fields and Distribution Prediction of Tectonic Fractures at the Hudi Coal Mine, Qinshui Basin

A comprehensive study on in situ stress field characteristics and changes in rock mechanical properties in deep mines in northeastern Yunnan, China

In Situ Dynamic Monitoring of Stress Revolution with Time and Space under Coal Seam Floor During Longwall Mining

A Novel in Situ Stress Measurement Method Based on Acoustic Emission Kaiser Effect: a Theoretical and Experimental Study.

In-situ stress prediction in ultra-deep carbonate reservoirs of Fuman Oilfield, Tarim Basin of China