Abstract:The elasto-inertial focusing has been widely employed for various biomedical applications such as cell sorting, monitoring and stretching measurement [1]. However, the widely-employed channel geometries have been limited to simple straight channels which commonly occupy a large footprint. The spiral channel, which can roll up a long channel (up to the order of 10 cm) in a small footprint (e.g., 1 cm2), has been regarded as a classical channel design in inertial microfluidics [2], but is rarely employed in elasto-inertial focusing due to the coexistence of inertial migration, Dean flow and viscoelastic effect. In spiral microchannels, the three above-mentioned effects may simultaneously affect the particle focusing at finite Reynolds numbers. As illustrated in figure 1(a), particles randomly-dispensed near the inlet would equilibrate at a specific lateral position under the competition of elastic force (FE), inertial lift force (FL) and Dean drag force (FD). Our previous work [3] explored the complex dependent of particle focusing patterns on flow rate and channel structure under the coupling of these three effects. However, to our best knowledge, the flexible control of particle focusing in spiral channels has not been reported. In this work, we realized the control of particle focusing position in a compact spiral channel through adjusting the polymer concentration of viscoelastic fluids. It is found that the lateral focusing position away from the inner channel wall (Xeq) could be flexibly controlled via adjusting the concentrations of the selected Poly(vinyl pyrrolidone) (PVP) solutions (see figure 1(b, c)). At the high polymer concentration (8.0 wt%), the particles could be prefect single-line focused at the channel centerline at specific flow rates (see figure 2) due to the dominance of elastic force over inertial lift force and Dean drag force. The particles in previously-reported spiral inertial microfluidics equilibrate very close to the channel wall [2], which prevents the application of this technique for traditional optical interrogations due to the unavoidable scattering of optical signals at the wall interface. Therefore, this center-line focusing may serve as a potential pretreatment for microflow cytometry detection. At low PVP concentrations (i.e., 5.2 wt%, 3.6 wt% and 2.0 wt%), the particles were found to shift towards the outer channel wall (see figure 3), which enables the continuous particle concentration at a low energy consumption to be possible. The physics behind the controllable particle shifting via adjusting polymer concentration is the comparable competition between the involved three forces (elastic force, inertial lift force and Dean drag force). To better understand the effect of polymer concentration on particle focusing, we quantitatively measured the focusing widths (normalized with particle diameter) and the lateral focusing positions of particles. The measured results were plotted as a function of flow rate (see figure 4). It is obviously to found that the particle focusing would shift towards the channel centerline with increasing polymer concentration.

Control of Non-Spherical Particles in Microfluidic Channel

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Control of Colloids with Gravity, Temperature Gradients, and Electric Fields

Study on Microfluidic Inertia Focusing of Rigid Microspheres

The Movement Law and Orientation Control of Rectangular Particles in the Viscous Fluid Domain Based on IS-FEM

Particle Manipulations in Non-Newtonian Microfluidics: A Review.

Field effect control of electrokinetic transport in micro/nanofluidics

Particle Focusing in a Straight Microchannel with Non-Rectangular Cross-Section

Particle Actuation by Rotating Magnetic Fields in Microchannels: a Numerical Study.

Active control of particle position by boundary slip in inertial microfluidics

Principles of hydrodynamic particle manipulation in internal Stokes flow

Simulation and Experimental Research for Microparticles in Microchannels With Dielectrophoretic Field-Flow Fractionation

Direct Numerical Simulation of Particle Segregation and Dynamics in Inertial Microfluidics by Discrete External Boundary Force-Lattice Boltzmann Method

Numerical Simulation of Elasto-Inertial Focusing of Particles in Straight Microchannels

Hydrodynamic Control of Droplets Coalescence in Microfluidic Devices to Fabricate Two-Dimensional Anisotropic Particles Through Boundary Element Method

Tunable Particle Focusing in a Straight Channel with Symmetric Semicircle Obstacle Arrays Using Electrophoresis-Modified Inertial Effects

Dynamic Process and Flow-Rate Regulation Mechanism of Particle Inertial Focusing in an Asymmetric Ally Curved Microchannel

Precise manipulation of longitudinal dynamic self-assembly of particles in the viscoelastic fluid within a straight microchannel

High-Throughput Inertial Particle Focusing in A Curved Microchannel: Insights into the Flow-Rate Regulation Mechanism and Process Model

Fundamentals of Differential Particle Inertial Focusing in Symmetric Sinusoidal Microchannels.

<strong>Controllable Elasto-inertial Focusing of Particles in Spiral Microfluidics</strong>