Abstract:Abstract Poly(vinylidene fluoride) (PVDF) ultrafiltration (UF) membrane was prepared by vapor and non-solvent-induced phase separation (VNIPS) process, and the relationships between preparation conditions, phase separation behaviors and membrane structures were discussed. The phase diagram was generated by cloud point titration, the effects of environmental relative humidity, air exposure time and casting solution temperature on the structure and performance of the resulted membrane were investigated. The addition of polyvinylpyrrolidone (PVP) additives to the casting solution made the system thermodynamically unstable and led the turbidity curve shift toward the solvent/non-solvent axis. The experimental results showed that both average pore size and porosity increased with higher relative humidity. When the relative humidity increased from 35 to 85%, the mean pore size increased from 35 to 70 nm. The effect of exposure time on membrane structure was related to the air environment. It was found that under low temperature and low humidity conditions, exposure time had little effect on membrane structure. When the relative humidity was 75%, the mean pore size and distribution increased with the exposure time extension from 1.0 to 30 s. The mean pore size of the membrane could be reduced by reducing the relative humidity. When the temperature of the casting solution increased, the membrane pore size reached maximum at 80 °C, and the spherulite on the surface of the membrane decreased. The spherulite morphology almost disappeared when the temperature of the casting solution reached 120 °C. In addition, with the increase in the casting solution temperature, large pores appeared in the sub-layer of the membrane, which gradually widened the pore distribution, leading to the decrease in the tensile strength. The preparation condition was optimized as low temperature of casting solution, low humidity and low temperature of the environment. The fabrication process showed the potential for scaling-up production of the PVDF UF membrane by the VNIPS technique.

Surface Hydrophilicity and Structure of Hydrophilic Modified PVDF Membrane by Nonsolvent Induced Phase Separation and Their Effect on Oil/Water Separation Performance

Influence of Solvents on the PVDF Membrane Properties

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Anti-fouling Performance Investigation of Micron-Submicron Hierarchical Structure PVDF Membranes in Water-in-oil Emulsion Separation

Hydrophilic modification of PVDF membranes for oily water separation with enhanced anti-fouling performance

Hydrophilic modification of <scp>PVDF</scp> membranes for oily water separation with enhanced anti‐fouling performance

Preparation of Superhydrophilic and Underwater Superoleophobic Pvdf-G-Paa Porous Membranes and Their Oil-Water Separation Performance

Superhydrophobic and Superoleophilic Pvdf Membranes for Effective Separation of Water-In-Oil Emulsions with High Flux

Surface modification of PVDF membrane via deposition-grafting of UiO-66-NH 2 and their application in oily water separations

Surface Hydrophilic Modification of PVDF Membranes Based on Tannin and Zwitterionic Substance Towards Effective Oil-in-water Emulsion Separation

Fabrication of Modified PVDF Membranes with PAA Network Polymer for Highly Efficient Oil/water Emulsion Separation

Enhancing the Hydrophobicity and Surface Roughness of Synthesized PVDF Membrane Using Evaporation and Non-solvent-Induced Phase Separation

Salt-induced and alcohol-induced hydrophobic and underoil superhydrophobic poly (vinylidene fluoride) membranes for effective oil collection

Preparation of PVDF membrane via synergistically vapor and non-solvent-induced phase separation

Investigation of Polyvinylidene Fluoride Membranes Prepared by Using Surfactant OP-10 Alone or with a Second Component, As Additives, Via the Non-Solvent-Induced Phase Separation (NIPS) Process

Preparation of PVDF Microporous Membranes via Combining TIPS with Rolling Embossing for Water-in-Oil Emulsions Separation

The Effects of Processing Conditions on the Surface Morphology and Hydrophobicity of Polyvinylidene Fluoride Membranes Prepared Via Vapor-Induced Phase Separation

Bio-inspired Method for Preparation of Multiwall Carbon Nanotubes Decorated Superhydrophilic Poly(vinylidene Fluoride) Membrane for Oil/water Emulsion Separation

Tailoring Morphology of PVDF-HFP Membrane Via One-step Reactive Vapor Induced Phase Separation for Efficient Oil-Water Separation

Robust Superhydrophobic PVDF Membrane Constructed by Template-Assisted Strategy Via Thermally Induced Phase Separation for Rapid Water-in-oil Emulsions Separation

A study on fabrication of PVDF-HFP/PTFE blend membranes with controllable and bicontinuous structure for highly effective water-in-oil emulsion separation