Abstract:Bismuth (Bi) is a promising anode candidate for sodium ion batteries (SIBs) with a high volumetric capacity (3765 mA h cm-3) and moderate working potential but suffers from large volume change (ca. 250%) during the sodiation/desodiation process, resulting in pulverization of the electrode, electrical contact loss, excessive accumulation of solid electrolyte interfaces, etc., devastating the cycling stability of the electrode seriously. Addressing this issue significantly relies on rational micro- and nano-structuring. Herein, we prepared a 3D multi-layered composite assembly of Bi/carbon heterojunctions with 0D bismuth nanospheres distributed and anchored on 2D nitrogen-doped carbon nanosheets (NCSs), using a preorganization strategy by taking full advantage of the strong complexation ability of Bi3+. The multi-layered composite assembly is periodic and close-packed, with Bi nanospheres <25 nm, carbon nanosheets ∼30 nm, and an average interlayer space of ∼75 nm. Such a specific architecture provides abundant electrochemically active surfaces and ion migration channels as the Bi nanospheres are attached to the 2D nitrogen-doped carbon nanosheets via a point-to-surface pattern. Moreover, the mono-layer Bi nanospheres oriented along the 2D-surface of NCSs are kinetically favorable for the recognition of Na+ by the active sites of Bi nanospheres as well as for avoiding the long distance migration of Na+ (external diffusion of Na+). Furthermore, thermodynamically, the small size and high surface energy of ultrasmall Bi nanospheres could contribute to high ion mobility (internal diffusion of Na+) and promote electrochemical reactions as well. The multi-layered composite assembly of Bi@NCSs (ML-Bi@NCSs) not only provides a robust 3D framework guaranteeing the whole structural stability but also ensures direct and full contact of each active nano-building block with electrolyte, thereby forming a high-throughput electron/ion transport system. When evaluated as the anode for SIBs, ML-Bi@NCSs deliver superior high-rate capability up to 30 A g-1 (specific capacity: 288 mA h g-1) and long-term cycling stability (capacity retention: 95.8% after 5000 cycles at 10 A g-1 and 90.6% after 10 000 cycles at 20 A g-1, respectively).

Nano-engineering induced Bi dots in-situ anchored into modified porous carbon with superior sodium ion storage

Rayleigh-Instability-Induced Bismuth Nanorod@Nitrogen-Doped Carbon Nanotubes As A Long Cycling and High Rate Anode for Sodium-Ion Batteries

Bi nanoparticles confined in N,S co-doped carbon nanoribbons with excellent rate performance for sodium-ion batteries

Facile Galvanic Replacement Construction of Bi@C Nanosheets Array As Binder‐Free Anodes for Superior Sodium‐Ion Batteries

Optimization of SbBix Nanoparticles Embedded in Ultra-Thin Carbon Networks for Enhanced Sodium/potassium Storage

2D Bismuth@N‐Doped Carbon Sheets for Ultrahigh Rate and Stable Potassium Storage

Novel Bismuth Nanoflowers Encapsulated in N‐Doped Carbon Frameworks as Superb Composite Anodes for High‐Performance Sodium‐Ion Batteries

Bi/Bi3Se4 Nanoparticles Embedded in Hollow Porous Carbon Nanorod:High Rate Capability Material for Potassium-Ion Batteries

Multicore–Shell Bi@N‐doped Carbon Nanospheres for High Power Density and Long Cycle Life Sodium‐ and Potassium‐Ion Anodes

A Multi-Layered Composite Assembly of Bi Nanospheres Anchored on Nitrogen-Doped Carbon Nanosheets for Ultrastable Sodium Storage

Bismuth nanoparticles confined in multi-walled carbon nanotubes toward enhanced sodium storage anodes

Fast and Long‐Lasting Potassium‐Ion Storage Enabled by Rationally Engineering Strain‐Relaxation Bi/Bi2O3 Nanodots Embedded in Carbon Sheets

Vapor-phase derived ultra-fine Bismuth nanoparticles embedded in carbon nanotube networks as anodes for sodium and potassium ion batteries

Bi@C Nanospheres with the Unique Petaloid Core–Shell Structure Anchored on Porous Graphene Nanosheets as an Anode for Stable Sodium- and Potassium-Ion Batteries

Hierarchical Bismuth–Carbon Microfoam Hybrid Structure Achieves Superior Sodium-Ion Storage

Heterogeneous Structured Bi 2 S 3 /MoS 2 @NC Nanoclusters: Exploring the Superior Rate Performance in Sodium/Potassium Ion Batteries

Coupling core–shell Bi@Void@TiO2 heterostructures into carbon nanofibers for achieving fast potassium storage and long cycling stability

Facile Construction of Nano-Dimensional Bi Encapsulated in N-Doped Porous Carbon Frameworks for High-Performance Sodium-Ion Hybrid Capacitors

Bismuth Nano-Rods Wrapped with Graphene and N-Doped C as Anode Materials for Potassium- and Sodium-Ion Batteries

Double-layer carbon coated on the micrometer bismuth by photothermal effect as anode for high-rate sodium-ion batteries

A High-Volumetric-capacity Bismuth Nanosheet/graphene Electrode for Potassium Ion Batteries