Abstract:Rockfall both is a major process in shaping steep topography and a hazard in mountainous regions. Besides increasing thread due to thawing permafrost-stabilization in high-elevation areas, there are abundant permafrost-free over-steepened rockwalls releasing rockfall due to other triggers. General rockfall event susceptibility is addressed to frost cracking, earthquake shacking and hydrologic pressure in the walls, and to geotechnical rock properties. Spatial rockwall surface surveys or scans (delivering 3D point clouds) have been used to both deduce rock fracture patterns and to measure individual rockfall events from comparing subsequent scans. Though, the actually measured rockwall topography data has rarely been used as a general predictor of rockfall susceptibility against the background of observed events.In this study, we use a series of dm-resolved annual (2014 to 2020) terrestrial laser scan surveys along 5km2 of limestone cliffs in the Lauterbrunnen Valley, Switzerland. The annual scan data were hand-cut to remove vegetation and fringes, and then referenced to detect subsequent topographic change in the direction of the wall. From the change-detection point clouds individual rockfall event volumes were detected from cluster and filtering analyses. One surveyed rockwall section of 2014 was used as training data for our Bayesian classification model of rockfall susceptibility, while the adjacent remaining section served for model validation. We rasterized their 3D data points and calculated several surface parameters per cell, including roughness, topography, mean distances for the three main fracture systems, fracture density, local dip, percent of overhang area, normal vector change rate (called edge) and percentage of overhang area. For various parameter sets and different cell sizes (32m2, 52m2, 102m2, 152m2, 252m2, and 402m2), we trained Naïve-Bayes-Classifier models. These were then used to predict rockfall susceptibility per cell, based on our observations of surface parameters, and assessed using Kullback-Leibler Divergence analysis and the misclassification cost score.Results indicate the overall best model (accounting for the parameters roughness, edge, topography and overhang area) and for the lowest cell size (32m2) could predict rockfall cells with a probability of 0.73 (against a mean of 0.3 for all cells). Predictions on another rockwall section with observed rockfall, located on the opposite side of the valley, verified the model’s applicability by both comparable probabilities (0.6 vs 0.25) and visual surveys on overhangs. We find our approach could reliably extend this spatial rockfall susceptibility classification to all Lauterbrunnen rockwalls. The classification model generally identified overhang areas and fractured zones as high rockfall risks, matching the general insight of these zones to be of major susceptibility. Interestingly, our method is based only on orientation-independent variables that are directly calculated from the 3D point cloud. Thus, it should be principally transferable to other sites of fractured limestone walls. Specifically, there is no need to determine fracture sets from the point cloud as is generally done for susceptibility studies, since we account for topography that would anyway be used to calculate fracture planes (facets). Hence, this method provides a simple means to predict spatial rockfall susceptibility, applicable for both hazard mapping and landscape evolution studies.

A Method for Automatic Assessment of Rockfall Susceptibility Based on High-Resolution Point Clouds

Comprehensive Mitigation and Control of Rockfall Hazard

Rockfall Source Areas Identification at Local Scale by Integrating Discontinuity-Based Threshold Slope Angle and Rockfall Trajectory Analyses

Quantitative assessment of rockfall hazard in post-landslide high rock slope through terrestrial laser scanning

Automatic Identification of Discontinuities and Refined Modeling of Rock Blocks from 3D Point Cloud Data of Rock Surfaces

Automatic identification of rock discontinuity and stability analysis of tunnel rock blocks using terrestrial laser scanning

Automated Method for Extracting and Analysing the Rock Discontinuities from Point Clouds Based on Digital Surface Model of Rock Mass

Semi-automatic Extraction of Dangerous Rock Blocks from Jointed Rock Exposures Based on a Discontinuity Trace Map

Automatic identification and characterization of discontinuities in rock masses from 3D point clouds

A New Semi-Deterministic Block Theory Method with Digital Photogrammetry for Stability Analysis of a High Rock Slope in China

A New Method for Automatic Extraction and Analysis of Discontinuities Based on TIN on Rock Mass Surfaces

Automatic discontinuity identification and quantitative monitoring of unstable blocks using terrestrial laser scanning in large landslide during emergency disposal

Spatial Rockfall Susceptibility Prediction from Rockwall Surface Classification

Automatic Characterization of Rock Mass Discontinuities Using 3D Point Clouds

Identification of potential rockfall sources using UAV-derived point cloud

Semi-automatic recognition of rock mass discontinuity based on 3D point clouds

Reproduction Method of Rockfall Geologic Hazards Based on Oblique Photography and Three-Dimensional Discontinuous Deformation Analysis

Discontinuity Recognition and Information Extraction of High and Steep Cliff Rock Mass Based on Multi-Source Data Fusion

Risk Assessment and Mitigation Evaluation for Rockfall Hazards at the Diversion Tunnel Inlet Slope of Jinchuan Hydropower Station by Using Three-dimensional Terrestrial Scanning Technology

Automatic Extraction of Rock Mass Discontinuity Based on 3D Laser Scanning

Method for Automated Discontinuity Analysis of Rock Slopes with Three-Dimensional Laser Scanning