ADVANCED AUTOMATIC SYSTEM FOR REMOTE CONTROL IN THE OIL AND GAS INDUSTRY
Ion Ghinea,Gabriela Bucur,,
DOI: https://doi.org/10.51865/jpgt.2023.02.18
2023-12-30
Romanian Journal of Petroleum & Gas Technology
Abstract:The purpose of this work is to design and implement a cascade control system of the level with the flow rate, with remote supervision, in an industrial type installation, located in the Laboratory of Measurement Techniques, Department of Automation, Computers and Electronics, within the Faculty of Mechanical and Electrical Engineering. The operating parameters of the installation are as follows: suction pressure: 0 – 2 bar; discharge pressure: 0 -10 bar; water flow: 0-30 m3/h; transported liquid: water. The automation system is structured on three hierarchical levels: level 1: the instrumentation mounted on the installation (transducers, signaling devices, etc.); level 2: includes the TGA System; level 3: constitutes the upper hierarchical level and includes the HMI (Human Machine Interface). The TGA system is a computerized system that ensures the monitoring, command and control functions of all the stand's component elements. It contains a programmable logic controller PLC 1214 – Siemens, which communicates via an Ethernet IP network with an operator interface and with the network of the Faculty of Mechanical and Electrical Engineering, which allows remote control of the installation. It also includes the protection system in case of failure, which involves stopping the rotating equipment, isolating the pipes by closing the control valve and alarming the operators. The HMI (Human Machine Interface) interface presents 3 options on the start page, from where the operator can select which application he wants to test: flow control loop application; level adjustment loop application; cascade adjustment loop application. The HMI equipment integrates SCADA functions, database update, evolution curves of analog quantities, sound and monitor alarm system, keyboard command, periodic records, event records, alarm records and technological schemes at the human-machine interface. The entire software is made in an open architecture, recommended by ISO norms. The PLC communicates in the network by adopting the protocol TCP/IP. An executable program used for the real-time application program was developed.