Abstract:Low‐velocity impact and damage analysis of polyurethane rubber/nano‐clay enriched sustainable sandwich composites. This research proposes a novel sustainable composite using basalt (B), hemp (H) and polyurethane rubber (Pu) reinforced in nano clay functionalised epoxy matrix for sacrificial structural applications prone to low‐velocity impact (LVI). To this end, symmetric and asymmetric laminates such as HHHH, BBBB, BHHB, BHPuHB, BBPuHH and BPuBPuHPuH are fabricated using compression molding techniques and subjected to LVI at three different impact energies of 19.66, 39.39, and 59.05 J. The hemp fibers were treated with NaOH solution before fabrication. Material characterization such as X‐ray diffraction, Raman spectroscopy and morphological studies has been carried out. The impact and post‐impact properties of the proposed composites are experimentally evaluated and validated with the finite element (FE) results. The effect on the residual tensile strength degradation of laminates at different interlayers and energy levels is also investigated using the Caprino analytical model. The barely visible impact damages (BVID) are investigated through non‐destructive dye‐penetration tests, which facilitate easy identification of the prominent LVI damages like "Plateau" and "Cliff‐drop" impressions. Based on the impact energy absorption and residual tensile strength, proposed laminates followed BHPuHB > BBBB > BHHB > HHHH. The experimentation suggests that Polyurethane core laminates support maximum impact energy absorption by favoring a structural change in interlayers. Also, the residual tensile strength decreases as impact velocity increases. Highlights Low‐velocity impact behavior of sustainable composites is experimented. Basalt, hemp and polyurethane rubber are reinforced in nano clay epoxy matrix. A FE framework to validate the experimentation is proposed. Dye penetrant NDT is adopted to investigate the damages. Morphological studies are conducted to understand LVI responses.

Repairability of Rubber-backed Vitrimer Composites under Variations of Impact Damage

Damage and repair study of in-situ polymerized carbon fiber reinforced PMMA composites

Mechanical Behaviour of As-Manufactured and Repaired Aligned Discontinuous Basalt Fibre-Reinforced Vitrimer Composites

Experimental investigation of impact resistance and compression behavior of CF/PEEK laminates after hot‐press fusion repair with different stacking sequences

Reformable and sustainable thermosetting carbon fiber composites from epoxy vitrimer

Preparation of Styrene–Butadiene Rubber Vitrimers with High Strength and Toughness Through Imine and Hydrogen Bonds

Effect of reparation on the mechanical behavior of glass fibers/Elium acrylic laminate composites: Experimental and numerical approaches

Restoration of Impact Damage in Polymers via a Hybrid Microcapsule–Microvascular Self‐Healing System

Rapid Fabrication of Malleable Fiber Reinforced Composites with Vitrimer Powder

Experimental study on the mode Ι interlaminar properties of self-healable vitrimeric CFRP with various interfaces

Low-Velocity Impact Response on Glass Fiber Reinforced 3D Integrated Woven Spacer Sandwich Composites

Development of Sustainable Jute/Epoxy Composite and Assessing the Effect of Rubber Crumb on Low Velocity Impact Response

In-situ and adhesive repair of continuous fiber composites using 3D printing

Impact Damage Tolerance of Thermoset Composites Reinforced with Hybrid Commingled Yarns

Study on impact resistance and parameter optimization of patch‐repaired plain woven composite based on multi‐scale analysis

Study into the Mechanical Properties of a New Aeronautic-Grade Epoxy-Based Carbon-Fiber-Reinforced Vitrimer

Low‐velocity impact characterization of polyurethane rubber/nano‐clay enriched sustainable sandwich composites: Synergy of experimentation and simulations

Experimental and finite element analysis on the performance of vacuum-assisted resin infused single scarf repairs

The tensile properties and repair behavior of glass fiber reinforced polymer using resin pre-coating technology

Experimental analysis of repaired CFRP by innovative hot bonding technology

Thermomechanical characterisation of reprocessable, siloxane-based, glass-fibre-reinforced vitrimers