Abstract:The HYDRUS model is an efficient technical means to study the process of complex nitrogen (N) transport in farmland. Nonetheless, spatial variability in soil water and N parameters has been observed at the field scale, leading to uncertainties in the HYDRUS model. In this study, the HYDRUS‐1D model was corrected and verified by the measured data. Generalized likelihood uncertainty estimation (GLUE) was used to estimate the uncertainty and sensitivity of the model parameters. The differences in simulated and measured data were expressed in terms of root mean square error, normalized root mean square error and coefficient of determination, and the model calibration and verification indicated that the result was reliable. The soil saturated water content, dispersion and sorption coefficient were well identified, with values ranging from 0.42 to 0.45 cm3/cm3, 0.26 to 0.29 cm and 0.141 to 0.158 L/mg, respectively. The denitrification rate and saturated hydraulic conductivity greatly influenced the uncertainty in the model results. Considering the uncertainty of the parameters, the predicted leaching of N accumulation from 0 to 100 cm depth ranged from 9.5 to 12.7 kg/ha. The HYDRUS‐1D model can simulate water and N transport in paddy fields. The prediction interval can be narrowed by considering the uncertainty of the model parameters. Résumé Le modèle HYDRUS est un moyen technique efficace utilisé pour étudier le processus de transport complexe de l'azote (N) dans les terres agricoles. Néanmoins, une variabilité spatiale des paramètres de l'eau du sol et de l'azote a été observée à l'échelle du champ, ce qui entraîne des incertitudes dans le modèle HYDRUS. Dans cette étude, le modèle HYDRUS‐1D a été corrigé et vérifié par les données mesurées. La technique GLUE (Generalised likelihood uncertainty estimation) a été utilisée pour estimer l'incertitude et la sensibilité des paramètres du modèle. Les différences entre les données simulées et mesurées ont été exprimées en termes d'erreur quadratique moyenne (RMSE), de n‐RMSE et de R2. La calibration et la vérification du modèle ont indiqué que le résultat était fiable. La teneur en eau saturée du sol, le coefficient de dispersion et de sorption ont été bien identifiés, avec des valeurs allant de 0,42–0,45 cm3/cm3, 0,26–0,29 cm et 0,141–0,158 L/mg, respectivement. Le taux de dénitrification et la conductivité hydraulique saturée ont grandement influencé l'incertitude des résultats du modèle. Compte tenu de l'incertitude des paramètres, le lessivage prévu de l'accumulation d'azote (N) à une profondeur de 0–100 cm était comprise entre 9,5 et 12,7 kg/ha. Le modèle HYDRUS‐1D peut simuler le transport de l'eau et de l'azote dans les rizières. L'intervalle de prédiction peut être réduit en tenant compte de l'incertitude des paramètres du modèle.

The probabilistic behavior of AquaCrop parameters: a Monte-Carlo study

An Easily Implemented Agro-Hydrological Procedure with Dynamic Root Simulation for Water Transfer in the Crop–soil System: Validation and Application

Analysis of parameter uncertainty in model simulations of irrigated and rainfed agroecosystems

AquaCrop—The FAO Crop Model to Simulate Yield Response to Water: III. Parameterization and Testing for Maize

Uncertainty and spatial analysis in wheat yield prediction based on robust inclusive multiple models

Bayesian Calibration of AquaCrop Model

Bayesian Calibration of AquaCrop Model for Winter Wheat by Assimilating UAV Multi-Spectral Images

Bayesian Calibration and Uncertainty Assessment of HYDRUS-1D Model Using GLUE Algorithm for Simulating Corn Root Zone Salinity under Linear Move Sprinkle Irrigation System

Accuracy and uncertainty analysis of staple food crop modelling by the process-based Agro-C model

Global sensitivity analysis of outputs over rice-growth process in ORYZA model

Simulating Maize Productivity under Selected Climate Smart Agriculture Practices Using AquaCrop Model in a Sub-humid Environment

Proposing a combined method for the estimation of spatial and temporal variation of crop water productivity under deficit irrigation scenarios based on the AquaCrop model

Identifying Precipitation Uncertainty in Crop Modelling Using Bayesian Total Error Analysis

Coupling Remote Sensing Data and AquaCrop Model for Simulation of Winter Wheat Growth under Rainfed and Irrigated Conditions in a Mediterranean Environment

A Robust Crop Rotation Optimization Model With Water Scarcity and Net Return Uncertainty Considerations

Research on Assimilation of Unmanned Aerial Vehicle Remote Sensing Data and AquaCrop Model

Usefulness of cultivar-level calibration of AquaCrop for vegetables depends on the crop and data availability

Calibration and evaluation of the FAO AquaCrop model for canola (Brassica napus) under full and deficit irrigation in a semi-arid region

The parametric uncertainty estimation of water and nitrogen transport simulation in a paddy field experiment using HYDRUS‐1D

Modeling the yield spatial distribution based on the basic production factors under uncertainty conditions in Kamin, Iran

Crop-growth-based spatially-distributed optimization model for irrigation water resource management under uncertainties and future climate change