Abstract:Beam loss detection is essential for the machine protection and the fine-tuning of the accelerator to reduce the induced radioactivity. Monte Carlo simulations are also vital for the choice of beam loss monitor (BLM) type, for predicting and understanding the BLM response to beam losses. At the China Spallation Neutron Source (CSNS), the cylindrical ionization chamber (IC) filled with $\mathrm{Ar}/{\mathrm{N}}_{2}$ gas mixture is the main type of the BLM to detect the beam losses. This paper presents the detailed beam loss experiments and fluka simulations for the CSNS BLM system. It includes the response functions of the BLM detectors by taking into account the contributions of different secondary particles to the energy deposition in the sensitive volume of the BLM. Dedicated experiments were compared with fluka simulations. It was found that in the low energy section of the linac the usual ion chamber based BLMs are not sensitive enough. A BLM based on ${\mathrm{BF}}_{3}$ enclosed by a high-density polyethylene (PE) moderator is effective to detect the beam losses through detecting thermal neutrons. Its signal is about 3 orders of magnitude higher than that of $\mathrm{Ar}/{\mathrm{N}}_{2}$ BLM for a beam energy of 15 MeV. The simulations provide the results of the intrinsic delay time for the ${\mathrm{BF}}_{3}$ monitor and the thickness optimization for PE to reduce the delay. Finally, the simulated spatial resolution of loss location by detection of neutrons is also evaluated for a beam energy of 15 MeV, which presents a resolution of $\ensuremath{\sim}2\text{ }\text{ }\mathrm{m}$ in our experimental configuration.

Digital processing and BLMASIC control prototype for the Beam Loss Monitor system in the SPS at CERN

Development of fiber beam loss monitor based on Cerenkov principle

Design of rf front end for cavity beam position monitor based on ics *

Design and Measurement of Signal Processing System for Cavity Beam Position Monitor

Design of Beam Loss Monitor System for an 800 MeV Synchrotron Facility

Electronics design and testing of the CMS Fast Beam Condition Monitor for HL-LHC

Development of the Beam Conditions Monitoring Prime system for beam abort and luminosity monitoring in ATLAS based on a segmented polycrystalline CVD diamond system and dedicated front-end ASIC

The optimization, design and performance of the FBCM23 ASIC for the upgraded CMS beam monitoring system

Prototype of Linac BLM at NSRL

The beam loss monitoring system for HLS storage ring

Development of a test platform for digital beam position monitor processor at SSRF

A Real-Time Beam Loss Monitoring System for Storage Ring of Ssrf

The CMS Fast Beam Condition Monitor for HL-LHC

The Design of Analog Manipulation Circuits in Digital BPM System

Design and preliminary performance of a novel mixed-signal front-end electronics with post digital shaping for CZT detectors

Experimental Studies and Monte Carlo Simulations for Beam Loss Monitors

Beam Loss Monitor System for SSRF Storage Ring

Data Acquisition System for Blm at Nsrl

Real-time Beam Loss Monitoring System for the Injector of SSRF