Thermal enthalpy regulation of methyl hexadecanoate/silica microcapsules with CTAB as emulsifier maintaining fixed core/shell ratio

Xian Wan,Cong Chen,Hongyu Zhang,Baohua Guo,Xia Zhan

DOI: https://doi.org/10.1007/s10973-021-10665-x

IF: 4.755

2021-03-23

Journal of Thermal Analysis and Calorimetry

Abstract:The fabrication and thermal enthalpy regulation of phase change materials (PCMs) microcapsules have been researched. Methyl hexadecanoate (MH) melting at about 29 °C was used as PCMs core and encapsulated in silica shell microcapsules by sol–gel method. Based on a fixed core/shell ratio, a series of MH/silica PCMs microcapsules were prepared, and cetyl trimethyl ammonium bromide (CTAB) was used as emulsifier. The morphologies of PCMs microcapsules were studied by scanning electron microscopy. The Fourier transform infrared spectroscopy results exhibited that there was only physical interaction between silica and MH core shell. The heat storage capability and good thermostability of PCMs microcapsules were characterized by differential scanning calorimetry and thermogravimetric analysis. The heating cyclic tests showed that MH in the microcapsules had an outstanding long-term performance. From the results, it was found that the decrease in CTAB content (from 0.60 to 0.03 g) promoted effectively the melting enthalpy of PCMs microcapsules from 18.08 to 71.45 J g−1 with the same core/shell ratio. It provides a promising candidate for the preparation of PCMs microcapsules with adjustable enthalpy and popular price.

chemistry, physical, analytical,thermodynamics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to adjust the enthalpy value of phase - change material microcapsules (PCMs microcapsules) with a fixed core - shell ratio by adjusting the content of the emulsifier CTAB. Specifically, the researchers used methyl hexadecanoate (MH) as the core of the phase - change material and prepared microcapsules with silica as the shell by the sol - gel method. During this process, CTAB was used as an emulsifier. By changing the content of CTAB, the researchers found that the melting enthalpy value of PCMs microcapsules could be effectively increased from 18.08 J/g to 71.45 J/g. This finding provides a new idea for preparing phase - change material microcapsules with adjustable enthalpy values and reasonable costs. The main contributions of the paper are as follows: 1. **Enthalpy value adjustment**: By adjusting the content of the emulsifier CTAB, the effective adjustment of the enthalpy value of PCMs microcapsules was achieved. 2. **Performance optimization**: In the case of a fixed core - shell ratio, by reducing the content of CTAB, the melting enthalpy value of the microcapsules was increased, making it exceed the theoretical value. 3. **Long - term performance**: Through 50 heating - cooling cycle tests, it was verified that the prepared PCMs microcapsules have good thermal stability and long - term performance. These research results are of great significance for the application of phase - change materials in the fields of thermal energy storage and temperature regulation.

Thermal enthalpy regulation of methyl hexadecanoate/silica microcapsules with CTAB as emulsifier maintaining fixed core/shell ratio

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Thermal Enthalpy Regulation of Methyl Palmitate /silica Phase Change Materials Microcapsules (pcmms) with Pva-1788 As Emulsifier Maintaining Fixed Core/Shell Ratio

Synthesis and Characterization of Mixed Alkanes Microcapsules with Phase Change Temperature below Ice Point for Cryogenic Thermal Energy Storage

Synthesis and Properties of Microencapsulated Octadecane with Silica Shell As Shape–stabilized Thermal Energy Storage Materials

Microencapsulated N-Octadecane with Different Methylmethacrylate-Based Copolymer Shells As Phase Change Materials for Thermal Energy Storage

Composite Shell Microcapsules With Room Temperature Phase‐Change Properties and High Thermal Storage Density

Facile and low energy consumption synthesis of microencapsulated phase change materials with hybrid shell for thermal energy storage

Microcapsules composed of stearic acid core and polyethylene glycol‐based shell as a microcapsule phase change material

Preparation of Phase Change Microcapsules with High Thermal Storage and Temperature Sensitive for Thermal Management

Al–Si @ Al2O3 @ mullite microcapsules for thermal energy storage: Preparation and thermal properties

Synthesis and characterization of phase change materials microcapsules with paraffin core/cross-linked hybrid polymer shell for thermal energy storage

Studies on Nanosilica Modified Paraffin Microcapsule Phase Change Energy Storage Materials

Microencapsulated phase change material through cellulose nanofibrils stabilized Pickering emulsion templating

Microencapsulation of Phase Change Materials with a Soy Oil-Based Polyurethane Shell via Pickering Emulsion Polymerization

Preparation and properties of microencapsulated n-octadecane with acrylic-based polymer as phase change materials

Morphology, Structure and Thermal Stability of Microencapsulated Phase Change Material with Copolymer Shell

Fabrication, Thermal Property and Thermal Reliability of Microencapsulated Paraffin with Ethyl Methacrylate-Based Copolymer Shell

Preparation of Silica Microcapsules Containing Phase Change Paraffin Wax

Adjusting phase change temperature of microcapsules by regulating their core compositions

Thermo-mechanical Analysis of Microcapsules Containing Phase Change Materials for Cold Storage