Abstract:RFID-based technology innovated a new field of wireless sensing, which has been applied in posture recognition, object localization, and the other sensing fields. Due to the presence of a Fresnel zone around a magnetic field when the RFID-based system is working, the signal undergoes significant changes when an object moves through two or more different Fresnel zones. Therefore, the moving object can be sensed more easily, and most of the sensing applications required the tag to be attached to the moving object for better sensing, significantly limiting their applications. The existing technologies to detect static objects in agricultural settings are mainly based on X-ray or high-power radar, which are costly and bulky, making them difficult to deploy on a large scale. It is a challenging task to sense a static target without a tag attached in NLOS (non-line-of-sight) detection with low cost. We utilized RFID technologies to sense the static foreign objects in agricultural products, and take metal, rock, rubber, and clod as sensing targets that are common in agriculture. By deploying tag matrices to create a sensing region, we observed the signal variations before and after the appearance of the targets in this sensing region, and determined the targets' positions and their types. Here, we buried the targets in the media of seedless cotton and wheat, and detected them using a non-contact method. Research has illustrated that, by deploying appropriate tag matrices and adjusting the angle of a single RFID antenna, the matrices' signals are sensitive to the static targets' positions and their properties, i.e., matrices' signals vary with different targets and their positions. Specifically, we achieved a 100% success rate in locating metallic targets, while the success rate for clods was the lowest at 86%. We achieved a 100% recognition rate for the types of all the four objects.
engineering, electrical & electronic,computer science, information systems,physics, applied
What problem does this paper attempt to address?
### Main Problem Addressed by the Paper
This paper primarily addresses the problem of locating and sensing static objects using an RFID tag matrix in Non-Line-of-Sight (NLOS) scenarios. Specifically, the research proposes a low-cost, easy-to-deploy system prototype capable of detecting static foreign objects in agricultural environments.
### Research Background and Challenges
- **Limitations of Existing Technologies**: Current technologies used for detecting static objects (such as X-rays or high-power radars) are expensive and bulky, making them difficult to deploy on a large scale in smart agriculture.
- **Specific Application Scenarios**: In the early stages of agricultural production, foreign objects such as metal screws, rubber aging products, and stones in the soil can damage equipment. These objects are often buried within the medium, posing a challenge for detection.
- **Insufficiencies of Existing Methods**: Manual sorting is time-consuming, labor-intensive, and inefficient, and it cannot detect objects hidden within the medium. Existing wireless sensing methods often rely on object movement or require tags to be attached to the target objects, limiting their application range.
### Main Contributions
1. **Innovative Detection and Localization Method**: For the first time, the use of Received Signal Strength (RSS) and Reflection Coefficient (S11) as feature vectors is proposed to achieve simultaneous detection, counting, type determination, and localization of foreign objects.
2. **Low-Cost Deployment Solution**: By deploying two sets of RFID tag arrays (located on different planes) in combination with a single RFID antenna, effective sensing of static objects is achieved.
3. **Comprehensive System Design**: This includes a data acquisition module, a virtual space coordinate division module, and an object sensing module. The sensing module comprises sensing and counting algorithms, localization algorithms, and a recognition algorithm based on a BP neural network.
### Technical Details
- **Principle of Signal Variation**: When RFID tags receive electromagnetic waves, they are activated and emit signals back into space in a scattered form. When the signal encounters foreign objects while propagating through the medium, it changes, allowing the system to detect and sense the foreign objects.
- **Position Determination Method**: The "projection" method is used to determine the position of foreign objects in virtual coordinates. By deploying tag arrays on two different planes (XOZ and XOY), multiple virtual coordinate points are formed, thereby determining the object's position.
- **Type Recognition**: The collected data (RSS and S11 values) are used to identify object types through a BP neural network model.
### Conclusion
This paper addresses the problem of detecting and locating static objects in NLOS scenarios through innovative methods, particularly for applications in agricultural environments, which holds significant practical importance. The proposed system not only effectively detects and locates static foreign objects but also features low cost and ease of deployment, contributing positively to the advancement of smart agriculture.