Abstract:Developing transition metal-based electrode materials with high charge storage ability and excellent cycle life is a substantial challenge for supercapacitor applications. This report demonstrates an improved specific capacitance and excellent cycling stability for a Ni/Co-hydroxide-(oxy)hydroxide electrode material obtained from the electrochemical reconstruction of a Ni/Co-pyrophosphate precursor. Herein, we have prepared a series of nickel/cobalt pyrophosphate (Ni x Co 100− x 600) ( x = 90, 80, 70, 60, 50, 0) materials through a simple co-precipitation method followed by thermal annealing. Upon electrochemical treatment, the developed nickel/cobalt pyrophosphate materials were transformed into porous Ni/Co-hydroxide-(oxy)hydroxides. This is due to the etching of pyrophosphate anions with electrochemical cycling, confirmed by rigorous physical characterization. Among them, Ni-rich electrodes showed higher specific capacitance values due to the dominant intercalation redox behavior (battery-type storage), yet they suffer from poor cycle stability. In contrast, Co-rich electrodes display low specific capacitance and excellent capacitance retention as the charge storage mainly occurs through surface redox processes. Interestingly, the incorporation of an adequate amount of cobalt into the nickel system has dramatically improved the charge storage ability as well as cycling stability owing to the synergistic effect between Ni and Co redox centers and the balanced charge storage phenomenon contributed by both the surface and intercalation redox processes. Especially, the material developed from Ni 60 Co 40 600 has exhibited a maximum specific capacitance of 566 F g −1 at 1 A g −1 current density and achieved an excellent capacitance retention of 84% (∼99% coulombic efficiency) up to 10 000 cycles. Further, the corresponding hybrid device (Ni 60 Co 40 600//AC) has displayed an operational voltage window of 1.6 V and achieved a maximum energy density of 14.9 W h kg −1 at 794.5 W kg −1 power density and could retain ∼86% of its initial capacity even after 25 000 cycles, thereby indicating the suitability of the electrode for practical applications.

Bimetal Pyrophosphate of CoNiP2O7@polypyrrole Nanocomposite‐ Based Electrode for Hybrid Supercapacitor Applications

Inlaying ZIF-derived Co3S4 Hollow Nanocages on Intertwined Polypyrrole Tubes Conductive Networks for High-Performance Supercapacitors

Hierarchical honeycomb-like networks of CuCo–P@Ni(OH)2 nanosheet arrays enabling high-performance hybrid supercapacitors

Synthesis of NiMn-LDH Nanosheet@Ni 3 S 2 Nanorod Hybrid Structures for Supercapacitor Electrode Materials with Ultrahigh Specific Capacitance

Polypyrrole and activated carbon enriched MnCo2O4 ternary composite as efficient electrode material for hybrid supercapacitors

Development of heterostructure-like Zn2P2O7/NF@PPybinder-free electrode for high-energy hybrid supercapacitor applications

Porous prussian blue analogs derived nickel-iron bimetallic phosphide nanocubes on conductive hollow mesoporous carbon nanospheres for stable and flexible high-performance supercapacitor electrode

Electrochemical surface reconstruction of nickel cobalt pyrophosphate to Ni/Co-hydroxide-(oxy)hydroxide: an efficient and highly durable battery-type supercapacitor electrode material

Amorphous P-NiCoS@C Nanoparticles Derived from P-doped NiCo-MOF As Electrode Materials for High-Performance Hybrid Supercapacitors

Decorating cobalt selenide nanoparticles on polypyrrole nanowires as nanocomposite electrodes for hybrid supercapacitors

High-performance hybrid supercapacitors based on electrodeposited amorphous bimetallic nickel cobalt phosphide nanosheets

Fabrication of Polypyrrole Conductive Matrix covered MnNi 2 O 4 Nanocomposite as the Positive Electrode Material in Asymmetric Supercapacitors

Chromium Cobaltite Based Ternary Composite as Efficient Electrode Material for Hybrid Supercapacitors with Theoretical Investigation

Architecture of interconnected cubic NiCo 2 S 4 decorated mesoporous carbon with self-doped nitrogen based-hydrogel for high performance hybrid supercapacitor

In-situ growing of polypyrrole to cobalt–aluminum layered double hydroxide for high cyclic stability of supercapacitors

Synthesis and characterization of Ni2+-doped polypyrrole electrodes for supercapacitor application

Synthesis and Study on Ni-Co Phosphite/Activated Carbon Fabric Composited Materials with Controllable Nano-Structure for Hybrid Super-Capacitor Applications

2D/2D Heterojunction of Cobalt Iron Selenide and Nickel Cobalt Phosphate for Boosted Supercapacitor Performance

Unlocking the synergetic potential of cobalt iron phosphate and multiwalled carbon nanotube composites towards supercapacitor application

Hybrid Electrodes by In-Situ Integration of Graphene and Carbon-Nanotubes in Polypyrrole for Supercapacitors

A High-Energy-Density Hybrid Supercapacitor with P-Ni(OH)2 @Co(OH)2 Core-Shell Heterostructure and Fe2 O3 Nanoneedle Arrays as Advanced Integrated Electrodes