Abstract:Immunochromatographic test strips typically consist of sample pad, conjugate pad, nitrocellulose membrane, and absorbent pad. Even minute variations in the assembly of these components can lead to inconsistent sample-reagent interactions, thereby reducing reproducibility. In addition, the nitrocellulose membrane is susceptible to damage during assembly and handling. To address this issue, we propose to replace the sample pad, conjugate pad, and nitrocellulose membrane with hierarchical dendritic gold nanostructure (HD-nanoAu) films to develop a compact integrated immunochromatographic strip. The strip uses quantum dots as a background fluorescence signal and employs fluorescence quenching to detect C-reactive protein (CRP) in human serum. A 5.9 μm thick HD-nanoAu film was electrodeposited on an ITO conductive glass by the constant potential method. The wicking kinetics of the HD-nanoAu film was thoroughly investigated, and the results indicated that the film exhibited favorable wicking properties, with a wicking coefficient of 0.72 μm ms-0.5. The immunochromatographic device was fabricated by etching three interconnected rings on HD-nanoAu/ITO to designate sample/conjugate (S/C), test (T), and control (C) regions. The S/C region was immobilized with mouse anti-human CRP antibody (Ab1) labeled with gold nanoparticles (AuNPs), while the T region was preloaded with polystyrene microspheres decorated with CdSe@ZnS quantum dots (QDs) as background fluorescent material, followed by mouse anti-human CRP antibody (Ab2). The C region was immobilized with goat anti-mouse IgG antibody. After the samples were added to the S/C region, the excellent wicking properties of the HD-nanoAu film facilitated the lateral flow of the CRP-containing sample toward the T and C regions after binding to AuNPs labeled with CRP Ab1. In the T region, CRP-AuNPs-Ab1 formed sandwich immunocomplexes with Ab2, and the fluorescence of QDs was quenched by AuNPs. The ratio of fluorescence intensity in the T region to that in the C region was used to quantify CRP. The T/C fluorescence intensity ratio was negatively correlated with the CRP concentration in the range of 26.67-853.33 ng mL-1 (corresponding to 300-fold diluted human serum), with a correlation coefficient (R2) of 0.98. The limit of detection was 15.0 ng mL-1 (corresponding to 300-fold diluted human serum), and the range of relative standard deviation: 4.48-5.31%, with a recovery rate of 98.22-108.33%. Common interfering substances did not cause significant interference, and the range of relative standard deviation: 1.96-5.51%. This device integrates multiple components of conventional immunochromatographic strips onto a single HD-nanoAu film, resulting in a more compact structure that improves the reproducibility and robustness of detection, making it promising for point-of-care testing applications.

Highly sensitive disposable test strips for sweat chloride detection using silver nanoparticles decorated reduced graphene oxide

Ultrasensitive Electrochemical Immunoassay Based on Graphene Oxide-Ag Composites for Rapid Determination of Clenbuterol.

Fully Transient Electrochemical Testing Strips for Eco-Friendly Point of Care Testing.

High-sensitivity and energy-efficient chloride ion sensors based on flexible printed carbon nanotube thin-film transistors for wearable electronics

Sensitive determination of iodide at graphitic carbon nitride-chitosan composite modified screen-printed electrode in urine and salt using cathodic stripping voltammetry

Spherical Silver Nanoparticles Located on Reduced Graphene Oxide Nanocomposites as Sensitive Electrochemical Sensors for Detection of L-Cysteine

Colorimetric Sweat Analysis Using Wearable Hydrogel Patch Sensors for Detection of Chloride and Glucose

Sensitive Portable Electrochemical Sensors for Antibiotic Chloramphenicol by Tin/Reduced Graphene Oxide-Modified Screen-Printed Carbon Electrodes

Wearable sweat chloride sensors: materials, fabrication and its applications

Preparation of a highly sensitive graphene-based sensor to investigate the effect of exercise on electrolytes in sweat in hot and humid environment

Flexible electrospun test strips functionalized with a graphene oxide/doxorubicin complex for dopamine detection

Sensitive and selective electrochemical lead Sensor: A synergistic effect of nanobiocomposite

Green and Integrated Wearable Electrochemical Sensor for Chloride Detection in Sweat

Electrochemical biosensor based on copper sulfide/reduced graphene oxide/glucose oxidase construct for glucose detection

Preparation of β-Cyclodextrin Functionalized Platform for Monitoring Changes in Potassium Content in Perspiration

Smartphone-based Wearable Microfluidic Electrochemical Sensor for On-Site Monitoring of Copper Ions in Sweat Without External Driving.

Sensitive electrochemical sensing of carbosulfan in food products on laser reduced graphene oxide sensor decorated with silver nanoparticles

Rapid preparation of CuO composite graphene for portable electrochemical sensing of sulfites based on laser etching technique

Blood glucose sensing by back gated transistor strips sensitized by CuO hollow spheres and rGO

Highly Stretchable and Robust Electrochemical Sensor Based on 3D Graphene Oxide–CNT Composite for Detecting Ammonium in Sweat

An integrated immunochromatographic device for C-reactive protein detection using hierarchical dendritic gold nanostructure films