Abstract:The inherent advantages of MEMS (micro-electromechanical system) technology, including small size and cost-effective fabrication, make it ideal for numerous applications in a wide range of industries ranging from defense, automotive, medical, to consumer industries. For applications that require self-powered MEMS electronics, an integrated energy storage device is required. Due to their small size, excellent cycle life and high-power density, miniature supercapacitors are an excellent choice for such an integrated energy storage device. The development of electrode materials and electrode fabrication processes for supercapacitors are thus critical for the practical applications of MEMS technology in electronics. In this presentation, Faraday Technology Inc. and Duke University will discuss a novel 3D graphenated carbon nanotube (g-CNT) network with pseudocapacitive coatings as the electrode materials for fabricating high energy density MEMS supercapacitors. The g-CNT has a high surface area three-dimensional framework of the CNTs coupled with the high edge density of graphene (Figure 1 A), which represents a potential maximum in both charge density and surface area, and thus provide the enhanced capacitance. An innovative electrophoretic deposition (EPD) manufacturing process, based on the use of pulsed electric fields, has been developed for controlled, reproducible, and scalable deposition of g-CNTs on interdigitated electrodes (Figure 1 B). In addition, pseudocapacitive coatings (such as MnO 2 ) have been electrodeposited on the g-CNT coated electrode to further increasing supercapacitor energy density. Figure 1 C shows no redox peaks, which is important for using this structure as a supercapacitor application. The square shape of the cyclic voltammogram shows that ions experience free flow through the 3-D g-CNT structure. The Charge/Discharge curves (Figure 1 D) indicate the areal energy density of g-CNT/MnO 2 coated electrodes (either 50 or 100 cyclic voltametric deposition cycles) are 45 and 93 times higher than g-CNT coated electrodes, respectively. In summary, a scalable manufacturing process for fabricating g-CNT network with pseudocapacitive coatings as electrodes has been demonstrated and shown great potential in producing high energy density MEMS supercapacitors for energy harvesting applications. Acknowledgements: The financial support of DOD DMEA STTR program through grant No. HQ0727-21-P-0029 is acknowledged and National Institutes of Health under award number 1R21EY031271 is acknowledged. The information, data, or work presented herein was funded in part by National Aeronautics and Space Administration under Grant No. 80NSSC19K1027, the views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Figure 1

Construction of Ultrahigh Capacity Density Carbon Nanotube Based MIM Capacitor

High-Performance MIM Capacitors for a Secondary Power Supply Application

(Digital Presentation) Graphenated Carbon Nanotube Based MEMS Supercapacitors

3D carbon nanotube-mesoporous carbon sponge with short pore channels for high-power lithium-ion capacitor cathodes

Hierarchical Nanocarbon-Mno2 Electrodes for Enhanced Electrochemical Capacitor Performance

Dielectric capacitors with three-dimensional nanoscale interdigital electrodes for energy storage

Highly Conductive Mo2C Nanofibers Encapsulated in Ultrathin MnO2 Nanosheets As a Self-Supported Electrode for High-Performance Capacitive Energy Storage.

High Power Density Electric Double-Layer Capacitor Based on a Porous Multi-Walled Carbon Nanotube Microsphere As a Local Electrolyte Micro-Reservoir

Demonstration and Characterization of 500 V MIM Capacitor with Al2O3 Dielectric Layer for Power Integrated Circuits

One dimensional MnO 2/titanium nitride nanotube coaxial arrays for high performance electrochemical capacitive energy storage

Engineering Chemical-Bonded Ti3C2 MXene@carbon Composite Films with 3D Transportation Channels for Promoting Lithium-Ion Storage in Hybrid Capacitors

Molybdenum dioxide supported carbon nanotubes@carbon constructs disordered nanocluster particles as anodes for lithium-ion capacitors with long-term cycling stability

Maximizing ion storage in MXene/Kevlar nanofiber composite films for enhanced capacitive energy storage

Monolithic integrated micro-supercapacitors with ultra-high systemic volumetric performance and areal output voltage

Cable-like Double-Carbon Layers for Fast Ion and Electron Transport: an Example of CNT@NCT@MnO2 3D Nanostructure for High-Performance Supercapacitors

Ultrahigh‐Areal Capacitance Flexible Supercapacitors Based on Laser Assisted Construction of Hierarchical Aligned Carbon Nanotubes

High performance lithium-ion capacitors based on scalable surface carved multi-hierarchical construction electrospun carbon fibers

Spatially confined synthesis of vanadium nitride nanodots intercalated carbon nanosheets with ultrahigh volumetric capacitance and long life for flexible supercapacitors

High-performance planar Zn-ion micro-capacitors

High Performance Electrochemical Capacitors from Aligned Carbon Nanotube Electrodes and Ionic Liquid Electrolytes

Peapod-Like Li3vo4/N-Doped Carbon Nanowires with Pseudocapacitive Properties As Advanced Materials for High-Energy Lithium-Ion Capacitors