Lithium-aluminium-silicate glass: A novel high-quality glass for preparing LuAG: Ce colour converter for laser illumination

Qianxiong Wen,Meilin Fu,Heng Chen,Shuang Pan,Chaofan Shi,Xinyue Zhang,Xiaojuan Liang,Xingen Hu,Weidong Xiang

DOI: https://doi.org/10.1016/j.ceramint.2023.09.037

IF: 5.532

2023-09-01

Ceramics International

Abstract:Phosphor-in-glass (PiG) plays an indispensable role as a highly tunable and easily prepared phosphor material for new-generation high-brightness and high-collimation laser lighting (blue laser diodes + colour converters). However, at low power (<5 W), the poor thermal stability and brittleness of PiGs make it challenging to develop high-intensity, high-brightness PiG materials because of their susceptibility to rupture and sudden drop in luminous efficiency (LE) owing to thermal accumulation under high-energy laser irradiation. In this study, a performance-tunable lithium-aluminium-silicate (LAS) glass system was used to adjust the glass composition and synthesise LAS-glasses that can be sintered at low temperatures. In addition to LuAG: Ce phosphor, LuAG: Ce phosphor-in-LAS (LuAG: Ce-PiGLAS) has been successfully developed, which can withstand an 8.24-W laser irradiation without heat dissipation, achieving a luminous flux of 1248 lm and LE of 204 lm/W. Furthermore, a pre-thermal treatment was used to precipitate the lithium disilicate phase to enhance the resistance of the glass to laser ablation, resulting in a power increase to 8.62 W at 1485 lm and maximum LE increase to 212 lm/W with a 2.5% attenuation at 498 K. High-brightness illumination performance was demonstrated in both transmission and reflection modules. This study is anticipated to generate new prospects for PiG applications and accelerate the development of laser lighting.

materials science, ceramics