Abstract:In this study, a series of CuMgAl layered double oxides (CuMgAl-LDOs) were obtained via calcination of CuMgAl layered double hydroxides (CuMgAl-LDHs) synthesised via a co-precipitation method. The results show that CuMgAl-LDO can be prepared using an optimal Cu:Mg:Al molar ratio of 3:3:2, NaOH:Na2CO3 molar ratio of 2:1, and calcination temperature of 600 °C. CuMgAl-LDO is a characteristic of mesoporous material with a lamellar structure and large specific surface area. The removal efficiency of sulfameter (SMD) based on CuMgAl-LDO/persulfate (PS) can reach > 98% over a wide range of initial SMD concentrations (5–20 mg·L-1). The best removal efficiency of 99.49% was achieved within 120 min using 10 mg·L-1 SMD, 0.3 g·L-1 CuMgAl-LDO, and 0.7 mM PS. Kinetic analysis showed that the degradation of SMD was in accordance with a quasi-first-order kinetic model. The stability of the CuMgAl-LDO catalyst was verified by the high SMD removal efficiency (>97% within 120 min) observed after five recycling tests and low copper ion leaching concentration (0.89 mg·L-1), which is below drinking water quality standard of 1.3 mg·L-1 permittable in the U.S. Radical scavenging experiments suggest that <math>SO4·−</math> is the primary active species participating in the CuMgAl-LDO/PS system. Moreover, our mechanistic investigations based on the radical scavenging tests and X-ray photoelectron spectroscopy (XPS) results indicate that Cu(II)-Cu(III)-Cu(II) circulation is responsible for activating PS in the degradation of SMD and the degradation pathway for SMD was deduced. Accordingly, the results presented in this work demonstrate that CuMgAl-LDO may be an efficient and stable catalyst for the activation of PS during the degradation of organic pollutants.

New insights into stoichiometric efficiency and synergistic mechanism of persulfate activation by zero-valent bimetal (Iron/Copper) for organic pollutant degradation

Fe and Zn co-doped carbon nanoparticles as peroxymonosulfate activator for efficient 2,4-dichorophenol degradation

Insights into the mechanism of persulfate activation with carbonated waste metal adsorbed resin for the degradation of 2,4-dichlorophenol

A New Insight into the Mechanism in Fe3O4@CuO/PMS System with Low Oxidant Dosage

Manganese doped iron–carbon composite for synergistic persulfate activation: Reactivity, stability, and mechanism

Surfactant-assisted removal of 2,4-dichlorophenol from soil by zero-valent Fe/Cu activated persulfate

Synergistic enhancement of Fe3+ coupling with Cu0 activated peroxodisulfate: Performance and mechanisms

Ferrous oxalate covered ZVI through ball-milling for enhanced catalytic oxidation of organic contaminants with persulfate

Insight into the Discriminative Efficiencies and Mechanisms of Peroxy Activation via Fe/Cu Bimetallic Catalysts for Wastewater Purification

Efficient activation of peroxymonosulfate on CuS@MIL-101(Fe) spheres featured with abundant sulfur vacancies for coumarin degradation: Performance and mechanisms

Heterogeneous activation of persulfate by CuMgAl layered double oxide for catalytic degradation of sulfameter

New insight into the mechanism of electro-assisted pyrite minerals activation of peroxymonosulfate: Synergistic effects, activation sites and electron transfer

Mechanism of metal sulfides accelerating Fe(II)/Fe(III) redox cycling to enhance pollutant degradation by persulfate: Metallic active sites vs. reducing sulfur species

Persulfate activation by sludge-derived biochar for efficient degradation of 2,4-dichlorophenol: performance and mechanism

Ultrathin Cu-Fe oxide nanosheets boosting persulfate activation to remove organic pollutants with coupling and transformation between radical and nonradical mechanism

Enhanced Peroxydisulfate Oxidation Via Cu(III) Species with a Cu-MOF-derived Cu Nanoparticle and 3D Graphene Network.

Synergistic effect and mechanism of zero-valent iron activated persulfate on Cu(II)–EDTA decomplexation enhanced with weak magnetic field

Persulfate activation by novel iron–carbon composites for organic contaminant removal: Performance, mechanism, and DFT calculations

Heterogeneous activation of persulfate by iron/manganese binary oxides for effective bisphenol A degradation

Pyrite-activated persulfate for simultaneous 2,4-DCP oxidation and Cr(VI) reduction

Sulfur-containing iron nanocomposites confined in S/N co-doped carbon for catalytic peroxymonosulfate oxidation of organic pollutants: Low iron leaching, degradation mechanism and intermediates